1 July 2019 in Journal of Hazardous Materials
1 June 2015 in Journal of Materials Chemistry A
Magnetron sputtered CuO thin films with a hierarchical structure and large specific surface were prepared, and their electrochemical properties and reaction characteristics as the Li-ion storage electrodes were investigated. The nanostructured CuO thin film showed a high capacity, good cycling stability and excellent rate performance and exhibited discharge capacities of 703 mA h g−1 at 100 mA g−1 and 465 mA h g−1 at 1000 mA g−1 even after 100 electrochemical cycles. Transmission electron microscopy was applied to investigate the phase evolution of the CuO thin film after being electrochemically induced at various stages in the 3rd lithiation–delithiation cycle. An intermediate phase of Cu4O3, besides Cu and Cu2O products, was identified in the CuO electrode during the electrochemical process. The investigation of phase evolution revealed that the CuO active materials were partially reduced to Cu4O3, followed by being reduced to Cu2O and Cu during the discharge process, whereas the reversible electrochemical reactions Cu → Cu2O → Cu4O3 → CuO took place during the charging process.
14 January 2014 in Journal of Materials Chemistry A
MoO 2 thin films with hierarchical structure demonstrate excellent rate capability and reversible capacity, and the phase transformation mechanism was revealed.
1 May 2019 in Journal of Power Sources
23 December 2016 in Journal of Advanced Ceramics
Y2O3-doped Zn1-xNi x O (x = 0, 0.3, 0.4, 0.5, 0.6, 0.7, and 0.9) powders were prepared by a wet chemical synthesis method, and the related ceramics were obtained by the traditional ceramic sintering technology. The phases and related electrical properties of the ceramics were investigated. The analysis of X-ray diffraction (XRD) indicates that the prepared ceramics with Ni substitution have a cubic crystalline structure. The resistance–temperature feature indicates that all the ceramics show a typical effect of negative temperature coefficient (NTC) of resistivity with the thermal constants between 3998 and 5464 K, and have high cyclical stability in a temperature range from 25 to 300 °C. The impedance analysis reveals that both grain effect and grain boundary effect contribute collectively to the NTC effect. The electron hopping and band conduction models are proposed for the grain (bulk) conduction, and the thermally activated charge carrier transport overcoming the energy barrier is suggested for the grain boundary conduction.
1 September 2018 in Journal of Alloys and Compounds