4 October 2026 in Izvestiya Vuzov. Tsvetnaya Metallurgiya (Proceedings of Higher Schools. Nonferrous Metallurgy)
This article presents the results of producing a high-entropy alloy of the Ti–Zr–Al–V–Cr system, intended for practical use as cathode targets in NNV-6.6 vacuum arc systems, using a combined method of melting and remelting. It is shown that direct remelting of the components by vacuum arc melting (VAM) in a copper mould leads to cracking of ingots due to high thermal stresses (cooling rate of 10 2 –10 3 °C/s), while switching off cooling causes copper contamination. To solve the problem, a combined method is proposed: preliminary melting of the components by VAM, followed by vacuum induction remelting (VIM) and casting into a mold. A special ceramic lining based on oxides containing up to 2 wt. % rare-earth metal oxides was used, ensuring minimal impurity contamination. The optimal crystallization parameters were selected: reduction of the cooling rate to 5–10 °C/s, use of a copper base plate for directional heat extraction and a feeder head to compensate for shrinkage effects. Scanning electron microscopy and energy-dispersive X -ray spectroscopy confirmed the chemical homogeneity of the resulting ingots (the contents of Ti, Zr, Al, V, and Cr were 16–27 at. %). The microhardness of the alloy was 768–789 HV with high reproducibility across batches. The cathode targets were successfully tested in the NNV-6.6-I1 installation: single-layer and two types of multilayer coatings were deposited on substrates made of Ti–6Al–4V titanium alloy. The developed technology ensures the production of defect-free ingots of a specified geometry (\(\emptyset \)80–85 mm, h = 45 mm), suitable for industrial use in vacuum arc deposition processes for protective coatings.