Polar-axis-oriented (CBTi144) films were fabricated on Pt foils using a complex metal alkoxide solution. The 500-nm-thick film showed the columnar structure and consisted of well-developed grains. The -axis orientation of the ferroelectric films is considered to be associated with the preferred orientation of Pt foil. The film showed good ferro- and piezoelectric properties. The and were 25 and 306 kV/cm, respectively, at an applied voltage of 115 V. The was characterized as 30 pm/V by piezoresponse force microscopy. The values were twice as large as those of the CBTi144 thin film with random orientation. The polar-axis-oriented CBTi144 films would open up possibilities for devices as Pb-free piezoelectric materials.
The Ca–Bi–Ti and Sr–Bi–Ti complex alkoxide solutions were used as tailored liquid sources for synthesis of a series of novel Bi-based layer-structured perovskite thin films with the number, n, of oxygen octahedra from 3 to 5. The complex alkoxide solutions had similar local structures, of which the stability for the partial hydrolysis was important to suppress compositional deviation in the resultant thin films. The Ca-containing thin films had the characteristic well-developed columnar structure which was distinct from the refractory stacking-grain structure of the Sr-contained thin films. The relationship between the lattice constants and the number of oxygen octahedra, n, confirmed that the series of thin films prepared using the alkoxide complex solutions had intentionally designed layer structure. Additionally, the dielectric and ferrolectric properties of the thin films were confirmed to depend on the A-site cations and the value of n.
Two typical precursors for Bi4Ti3O12 thin films were analyzed spectroscopic methods and the local structure of those were chemically distinguished. Bi═Ti double alkoxide precursor containing Bi═O═Ti bonds promoted the homogeneous crystallization and was applicable to a series of Ca═Bi═Ti layer-structured ferroelectric thin films by addition of Ca ions. A hybrid precursor composed of Bi-triethylhexanoate and Ti-alkoxide needed the additional glass phase to suppress Bi2O3 segregation and resultantly, thinner Bi4Ti3O12 films with a thickness of 40 nm could be synthesized at 500°C and showed ferroelectricity.