Giuseppe Scardera

Giuseppe Scardera

Auto-generated profile, based on publicly available information

Giuseppe Scardera

School of Photovoltaic and Renewable Energy Engineering University of New South Wales Sydney NSW 2052 Australia

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 January 2021 in IEEE Journal of Photovoltaics
Verified
Journal Article
Open access
GSGiuseppe Scardera
Giuseppe Scardera
SWShaozhou Wang
Shaozhou Wang
YZYu Zhang
Yu Zhang
MKMuhammad Umair Khan
Muhammad Umair Khan
SZShuai Zou
Shuai Zou
MAMalcolm D. Abbott
Malcolm D. Abbott
The integration of nanotextured black silicon (B-Si) into solar cells is often complicated by its enhanced phosphorus doping effect, which is typically attributed to increased surface area. In this article, we show that B-Si's surface-to-volume ratio, or specific surface area (SSA), which is directly related to surface reactivity, is a better indicator of reduced sheet resistance. We investigate six B-Si conditions with varying dimensions based on two morphology types prepared using metal-catalyzed chemical etching and reactive-ion etching. We demonstrate that for a POCl 3 diffusion, B-Si sheet resistance decreases with increasing SSA, regardless of surface area. 2-D dopant contrast imaging of different textures with similar surface areas also indicates that the extent of doping is enhanced with increasing SSA. 3-D diffusion simulations of nanocones show that both the extent of radial doping within a texture feature and the metallurgical junction depth in the underlying substrate increase with increasing SSA. We suggest SSA should be considered more readily when studying B-Si and its integration into solar cells.

22 June 2021 in IEEE Journal of Photovoltaics
Verified
Journal Article
Open access
GSGiuseppe Scardera
Giuseppe Scardera
DPDavid N. R. Payne
David N. R. Payne
MKMuhammad Umair Khan
Muhammad Umair Khan
YZYu Zhang
Yu Zhang
ASAnastasia Soeriyadi
Anastasia Soeriyadi
MAMalcolm David Abbott
Malcolm David Abbott
The enhanced surface area of silicon nanotexture is an important metric for solar cell integration as it affects multiple properties including optical reflectance, dopant diffusion, and surface recombination. Silicon nanotexture is typically characterized by its surface-area-to-projected-area ratio or enhanced area factor (EAF). However, traditional approaches for measuring EAF provide limited statistics, making correlation studies difficult. In this article, silicon's dominant ultraviolet reflectance peak, R(E2), which is very sensitive to surface etching, is applied to EAF spatial mapping. A clear decay correlation between R(E2) and EAF is shown for multiple textures created using reactive ion etching and metal catalyzed chemical etching. This correlation is applied to R(280 nm) reflectance mapping to yield accurate, high-resolution full-wafer EAF spatial mapping of silicon nanotextures. R(280 nm) mapping is also shown to be sensitive enough to correlate the impact of nanotexture spatial variation on post-diffusion sheet resistance. Finite-difference time-domain simulations of several nanoscale pyramid textures confirm a decay band for R(E2) versus EAF, consistent with our measurements. We suggest that R(E2) mapping may prove useful for other silicon nanotexture properties and applications where EAF is important.

24 February 2022 in IEEE Journal of Photovoltaics
Verified
Journal Article
Open access
SWShaozhou Wang
Shaozhou Wang
GSGiuseppe Scardera
Giuseppe Scardera
FMFa-Jun Ma
Fa-Jun Ma
YZYu Zhang
Yu Zhang
DPDavid Payne
David Payne
BHBram Hoex
Bram Hoex
Nanostructured black silicon (b-Si) surfaces with an extremely low reflectance are a promising light-trapping solution for silicon solar cells. However, it is challenging to develop a high-efficiency front-junction b-Si solar cell due to the inferior electrical performance of b-Si emitters, which outweighs any optical gain. This article uses three-dimensional numerical nanoscale simulations, which are corroborated with experiment results, to investigate the effect of the surface nanofeature sizes on the b-Si emitter performance in terms of the sheet resistance (R sheet ) and the saturation current density (J 0e ). We show that the specific surface area (SSA) is an effective parameter to evaluate the nanofeature size. A shallow surface nanofeature with a large SSA will contribute to a better electrical performance. We will show that b-Si emitter R sheet measured by a four-point probe is not a measure of the doping level in the nanofeature, but is ruled by the doping level in the underlying substrate region. We also show that a small nanofeature with SSA > 100 μm -1 and height < 100 nm can lead to a relatively low J 0e (33 fA/cm 2 lower than the best b-Si results reported in the literature) by suppressing surface minority carrier density and minimizing the total Auger recombination loss.

8 March 2021 in IEEE Journal of Photovoltaics
Verified
Journal Article
Closed access
MKMuhammad Umair Khan
Muhammad Umair Khan
GSGiuseppe Scardera
Giuseppe Scardera
SZShuai Zou
Shuai Zou
DZDaqi Zhang
Daqi Zhang
MAMalcolm Abbott
Malcolm Abbott
Light- and elevated temperature-induced degradation (LeTID) of silicon wafers reduces the energy yield of photovoltaic modules in the field. A previous study demonstrated that this degradation is greatly reduced in samples with a surface textured with black silicon formed via reactive ion etching. However, the reason for this reduction is currently not understood. This article extends that result to a range of nano-textures formed using commercial metal-catalyzed chemical etching. Lifetime test structures are fabricated on multicrystalline wafers with six different chemical nano-textures and the results are compared to planar reference samples. The article demonstrates a reduction in the extent of light-induced degradation compared to planar reference samples for all six textures. The extent of LeTID is observed to reduce with decreasing front surface reflectance and increasing front surface area. The article finds that wafer thickness, phosphorus gettering, and fast-firing cannot explain the result.

25 September 2022 in Advanced Materials Technologies
Verified
Journal Article
Open access
YZYu Zhang
Yu Zhang
GSGiuseppe Scardera
Giuseppe Scardera
SWShaozhou Wang
Shaozhou Wang
MAMalcolm Abbott
Malcolm Abbott
DPDavid Payne
David Payne
BHBram Hoex
Bram Hoex
Phosphorous dopant diffusion profiles feature in many silicon semiconductor devices, including the vast majority of silicon solar cells. Accurate spatially resolved dopant profiling is crucial for understanding the performance of these diffused regions, however, it is very challenging to obtain such profiles in non‐planar samples. Scanning electron microscopy for dopant contrast imaging (SEMDCI), where the secondary electron (SE) image contrast is used to determine the dopant level of a semiconductor sample, is an ideal candidate for Si dopant profiling, especially for silicon samples with surface nanotexturing or black silicon (BSi) technology. However, in previous SEMDCI studies, the dopant concentration of heavily doped n‐type layers in silicon samples have shown a poor correlation with the SE signal contrast. In this work, 1) good contrast for n‐type diffused silicon without contrast‐enhancing techniques; 2) a new contrast definition to account for imaging non‐uniformities; 3) clear correlations between SE contrast and sample work function for phosphorus‐diffused planar silicon specimens across a wide range of emitter profiles; 4) implementation of an empirical baseline correction to normalize scanning electron microscopy image condition variations, are presented. This SEMDCI method is subsequently used for the first time to obtain 2D electron concentration maps for both planar and BSi samples.

28 April 2022 in Advanced Materials Technologies
Verified
Journal Article
Open access
YZYu Zhang
Yu Zhang
TVTom Veeken
Tom Veeken
SWShaozhou Wang
Shaozhou Wang
GSGiuseppe Scardera
Giuseppe Scardera
MAMalcolm Abbott
Malcolm Abbott
BHBram Hoex
Bram Hoex
Black silicon (BSi) is a branch of silicon material whose surface is specially processed to a micro/nanoscale structure, which can achieve ultra‐low reflectance or ultra‐high electrochemical reactivity. The diversity and complex surface structures of BSi make it challenging to commercialize BSi devices. Modeling and simulation are commonly used in the semiconductor industry to help in better understanding the material properties, predict the device performance, and provide guidelines for fabrication parameters’ optimization. The biggest challenge for BSi device modeling and simulation is obtaining accurate input surface morphological data. In this work, the 3D models of challenging BSi textures are compared as obtained by atomic force microscopy (AFM) and plasma focused ion beam (PFIB) tomography techniques. In previous work, the PFIB tomography workflow toward the application of surface topography is optimized. In this work, the 3D models obtained from both AFM and PFIB are comprehensively compared, by using the surface models as inputs for finite‐difference time‐domain‐based optical simulation. The results provide strong evidence that PFIB tomography is a better choice for characterizing highly roughened surface such as BSi and provides surface 3D models with better reliability and consistency.