This article describes a new transverse edge structure with double busbar for surface acoustic wave (SAW) devices employing a 42°YX-lithium tantalate thin plate such as incredible high-performance (I.H.P.) SAW. This design offers good energy confinement and scattering loss suppression for a wide frequency range. First, preexisting transverse edge designs are reviewed, and their difficulties are pointed out using the dispersion relation for lateral SAW propagation. Then, numerical simulations are performed using the periodic 3-D finite-element method (FEM) powered by the hierarchical cascading technique, and effectiveness of the proposed structure is revealed. In addition, we also provide a possible solution to expand the frequency range giving well energy confinement and demonstrate effectiveness of manipulating the SAW slowness curve shape for transverse mode suppression.
15 March 2023 in IEEE Transactions on Microwave Theory and Techniques
This article investigates a spurious resonance appearing near the antiresonance when the double-busbar configuration is applied to layered surface acoustic wave (SAW) resonators using 42 $^\circ$ YX-LiTaO $_3$ thin plates, and possible mitigation methods are studied both theoretically and experimentally. First, the origin of the spurious resonance is revealed, and the influence of structural parameters is studied using the periodic 3-D finite-element method (FEM) powered by the hierarchical cascading technique (HCT). Then, possible methods are discussed for spurious mitigation. Finally, experimental data are provided for validation of the present analysis.
10 November 2022 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
This paper discusses combination of tetragonal crystals with LiTaO 3 (LT) thin plate for complete transverse resonance suppression of surface acoustic wave devices without k 2 deterioration by manipulating the slowness shape. Besides, better lateral energy confinement is achieved as well by the use of double busbar structure. First, the mechanism of slowness shape manipulation by combining tetragonal crystals is studied. By comparison, YZ-lithium tetraborate (LBO) shows better performance than 69°Y90°X quartz. Then numerical simulations are carried out using periodic three-dimensional finite method assisted by hierarchical cascading technique, and the effectiveness of transverse mode suppression by flattening the slowness shape is revealed. And the possibility to realize temperature compensation is discussed owing to the unique material property of LBO. Moreover, the capability of other tetragonal crystals for slowness manipulation are compared, and LBO is the best choice among these tetragonal crystals.
29 April 2022 in Japanese Journal of Applied Physics
This paper discusses the applicability of double busbar design to surface acoustic wave (SAW) devices employing low-cut lithium tantalate (LT) with a multi-layered structure. This design offers good energy confinement, scattering loss suppression and transverse mode suppression for a wide frequency range. In addition, the effectiveness of manipulating the slowness curve shape for transverse mode suppression is demonstrated. First, three different lateral edge designs are applied to the layered SAW configuration on low-cut LT, and their performances are compared using the periodic three-dimensional finite-element method powered by the hierarchical cascading technique. Then, the discussion is extended to the influence of the SAW slowness shape to the transverse mode suppression.
This letter investigates impact of the surface acoustic wave (SAW) slowness curvature on anti-resonance quality factor ( Q a ) of RF SAW resonators. First, variation of SAW resonance characteristics with aperture width W is studied using periodic three dimensional finite-element method for three structures with different slowness curvature. It is shown that the slowness shape affects the frequency ( f ) dependence of Bode Q , and smaller slowness curvature makes the Bode Q less sensitive to both f and W . This means that when the curvature is small, SAWs propagate like parallel beams on the substrate surface and are scarcely influenced by discontinuities at side boundaries such as electrode tips. Since loss mechanisms in the aperture region mainly contribute to the Bode Q reduction, high Q a and maximum Bode Q are achievable. Finally, series of I.H.P. SAW resonators using 42°YX-LiTaO 3 are fabricated, and it is verified that the Bode Q is not sensitive to W when the electrode ohmic loss is ignored.
21 January 2022 in Japanese Journal of Applied Physics
This paper describes the design and fabrication of spurious-free thickness-shear bulk acoustic resonators (TSBARs) using the lithium niobate (LN) plate. Previously, the authors conjected from the experiment on the TSBAR that cut-off edges with crystal LN x plane serve as ideal reflectors for the piston mode operation, and complete suppression is possible by adding the standard piston mode design to the other edges normal to the X -axis. Following this conjecture, the traditional piston mode structure is designed by the traditional two-dimensional finite element method, and the TSBAR is fabricated following the design. The experiment showed complete suppression of the transverse mode resonances, and the conjecture was verified.