Olivier Laget

Olivier Laget

Auto-generated profile, based on publicly available information

Olivier Laget

Institut Carnot IFPEN Transports Energies, IFP Energies nouvelles, Rueil Malmaison, France

Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 May 2023 in International Journal of Engine Research
Verified
Journal Article
Closed access
OLOlivier Laget
Olivier Laget
LRLoïc Rouleau
Loïc Rouleau
MCMatthieu Cordier
Matthieu Cordier
FDFlorence Duffour
Florence Duffour
GMGiampaolo Maio
Giampaolo Maio
LNLudovic Nowak
Ludovic Nowak
As part of the fight against global warming and to achieve greenhouse gas emission targets, it is crucial to reduce the carbon footprint of ground transportation. Mobility needs are continuously growing with increase in population. All these factors will lead to an upsurge in the energy demand for the mobility in the very next future. Consequently, the diversification of low carbon energy sources is urgently required. Hydrogen can be used for mobility solution in its two energy conversion mechanisms: The Fuel Cell technology or the Internal Combustion Engine (ICE). The latter option, studied in the present work, offers the advantages of current fossil fuel engines – existing and proven technology, lifetime, controlled cost – with a very low carbon footprint. The overall objective of the study is to define the specifications of a dedicated Hydrogen direct injection combustion system for ground transportation application with the best fuel efficiency and lower raw emissions, to minimize the aftertreatment needs. A complete experimental and numerical study was carried out to get valuable information on various phenomena occurring throughout the engine cycle. The very first step of the study consisted in performing experimental investigations. For this purpose, an all metal single cylinder engine originally designed for gasoline spark ignited combustion (tumble air motion, gasoline direct injection) was modified for hydrogen direct injection combustion. The gas-gas injection was experimentally studied in the High Pressure/High Temperature vessel available at IFPEN. Those experiments were used to calibrate the 3D CFD numerical approach. Based on a 0D pre-study (boundary conditions) and using the injection modeling calibration introduced before, 3D CFD simulations have been then carried out with specific hydrogen kinetics properties. Finally, this comprehensive study highlights the specificities of ICE running with hydrogen. It provides indications and guidelines for further developments and optimization of hydrogen combustion engines.

2 November 2009 in SAE International Journal of Engines
Verified
Journal Article
Closed access
PDF file
BWB. Walter
B. Walter
HPH. Perrin
H. Perrin
JDJ. P. Dumas
J. P. Dumas
OLO. Laget
O. Laget
With a high thermal efficiency and low CO2 (carbon dioxide) emissions, Diesel engines become leader of transport market. However, the exhaust-gas legislation evolution leads to a drastic reduction of NOx (nitrogen oxide) standards with very low particulate, HC (unburned hydrocarbons) and CO (carbon monoxide) emissions, while combustion noise and fuel consumption must be kept under control. The reduction of the volumetric compression ratio (CR) is a key factor to reach this challenge, but it is today limited by the capabilities to provide acceptable performances during very cold operation: start and idle below −10°C. This paper focuses on the understanding of the main parameter’s impacts on cold operation. Effects of parameters like hardware configuration and calibration optimization are investigated on a real 4 cylinder Diesel 14:1 CR engine, with a combination of specific advanced tools. In-cylinder high speed visualizations allow to observe locally injection and combustion processes and to complete the standard combustion analysis operated from heat release which is a more global approach. Moreover, the CFD (Computational Fluid Dynamics) calculation, which combines the local and global approaches, is really helpful when phenomena take place out of the visualization area. Very local phenomena specific to cold operation as combustion of the spray close to the glow plug, or combustion in the hot burned gases coming from the Pilot injection combustion have been highlighted. Thus, concerning hardware configuration, glow plug and spray interaction appears to be the first order parameter and glow plug temperature shows a great influence on cold idle. Concerning calibration, the use of Pilot injection improves significantly cold operation (especially opacity and engine speed stability), by deeply modifying the fuel and temperature stratification in the combustion chamber.

15 August 2025 in International Journal of Engine Research
Verified
Journal Article
Closed access
DSDavid Serrano
David Serrano
VGVincent Giuffrida
Vincent Giuffrida
OLOlivier Laget
Olivier Laget
XGXavier Gautrot
Xavier Gautrot
In the critical context of global warming, the diversification of the energy sources is urgently required. Regarding mobility, in addition to vehicles electrification and advanced biofuels, hydrogen holds the potential to address significant emission reduction for internal combustion engines. This approach preserves the advantages of current fossil fuel engines, such as established and proven technology, long lifespan, controlled costs, and an ultra-low carbon footprint. Hydrogen is convenient for heavy-duty and off-road applications for which battery capacity is challenging. Currently, two approaches cohabit in the engineering of hydrogen internal combustion engines: the adaptation of a Diesel-based engine or the design of a brand-new engine dedicated to hydrogen. The presented study focuses on a dedicated combustion chamber for hydrogen combustion for heavy-duty applications with a pent-roof cylinder head and a specific piston shape. The key features of the combustion system have been defined through numerical analysis, focusing on the main challenges of hydrogen combustion engine: fuel/air mixing quality, combustion process, and resistance to abnormal combustions. A heavy-duty single-cylinder engine equipped with this optimized combustion system has been tested on a test bench using hydrogen with realistic conditions for the air loop. The test campaign has been focused on the injection strategy and the identification of the optimal settings. A new methodology for characterization of abnormal combustion has been developed to precisely detect pre-ignition or knock at high load. The main limitations have been identified to operate the engine at full load. Finally, the engine has been tuned in the whole operating range with optimal settings and the performances have been benchmarked by comparing with current engines fueled with Diesel or natural gas. 3D simulation feedback has been done also through the test campaign to assess the validity of the numerical approach used to design this hydrogen combustion system.

28 March 2017 in SAE International Journal of Advances and Current Practices in Mobility
Verified
Conference Paper
Closed access
PDF file
RKRajesh Kumar
Rajesh Kumar
OLOlivier Laget
Olivier Laget
GPGuillaume Pilla
Guillaume Pilla
GBGuillaume Bourhis
Guillaume Bourhis
RDRoland Dauphin
Roland Dauphin
JSJean-Pascal Solari
Jean-Pascal Solari
Reduction of CO2 emissions is becoming one of the great challenges for future gasoline engines. The aim of the current research program (OOD: Octane On Demand) is to use the octane number as a tuning parameter to simultaneously make the engine more efficient and reduce CO2 emissions. The idea is to prevent knock occurrence by adapting the fuel RON injected in the combustion chamber. Thus, the engine cycle efficiency is increased by keeping combustion phasing at its optimum. This is achieved by a dual fuel injection strategy, involving a low-RON base fuel (Naphtha or Low RON cost effective fuel) and a high-RON octane booster (ethanol). The ratio of fuel quantity on each injector is adapted at each engine cycle to fit the RON requirement as a function of engine operating conditions. A first part of the project, described in [18], was dedicated to the understanding of mixture preparation resulting from different dual-fuel injection strategies. The present part is focused on the evaluation, the understanding, and the characterization of Auto-ignition (AI) propensity (mostly knock occurrence) as a function of the injection strategy.This work relies on experimental and 3D-simulation investigations. Port Fuel Injection (PFI) and Side Direct Injection (SDI) were studied separately and in dual-injection modes. Detailed investigations on auto-ignition occurrence were carried out with 3D CFD calculations. After validating the simulation results using dedicated experimental measurements, several observations were made. Those observations enable to explain the high auto-ignition tendency with low RON fuel in Port-Fuel Injection (PFI) mode and to give indications on the “octane boosting effect” of RON booster (ethanol) in direct-injection and PFI mode. Finally, some hypothetical but very relevant “perfect heterogeneous” cases were studied in order to help selecting the injection strategy for octane booster and base fuel.

26 June 2026 in International Journal of Engine Research
Verified
Journal Article
Closed access
MBMichele Bardi
Michele Bardi
HQHugo Quintens
Hugo Quintens
CBClement Bramoullé
Clement Bramoullé
EKEric Kohler
Eric Kohler
VGVincent Giuffrida
Vincent Giuffrida
OLOlivier Laget
Olivier Laget
Hydrogen direct injection internal combustion engines (H2 ICE) present a practical and cost-effective alternative for medium-term energy transition applications, leveraging principles similar to spark ignition engines (SI). However, optimizing H2 ICE requires addressing hydrogen’s unique properties, including low molecular weight, high diffusivity, and distinct combustion characteristics. Existing research on hydrogen combustion often fails to replicate in-engine conditions, particularly regarding thermodynamic states and turbulence levels. This study investigates the entire in-engine process, including hydrogen jet injection, mixing, combustion, and heat transfer, under conditions representative of H2 ICE. Experiments were conducted using an optically accessible high-pressure, high-temperature vessel, allowing independent variation of parameters such as chamber gas and injector temperature, chamber pressure, and hydrogen injection pressure. A prototype injector for heavy-duty applications (PHINIA DI CHG15) was used to inject hydrogen into a quiescent environment during 7.5 ms, achieving a global equivalence ratio of 0.39. A slide-shaped deflector preserved the jet’s kinetic energy, generating a transient tumble motion that enhanced turbulence and mixing. Combustion behavior was analyzed using schlieren imaging, negative laser-induced fluorescence, and in-chamber high-speed pressure measurements. The results reveal a strong correlation between turbulence levels, flame front speed, and heat flux. Turbulence generated during injection influenced combustion up to 150 ms post-injection, enhancing mixing and flame propagation. Delaying ignition timing from 40 to 150 ms reduced the heat release rate fivefold and wall heat flux from 3.5 to 1 MW/m 2 , with sensitivity diminishing beyond 150 ms. Hydrogen exhibited significantly higher flame front speeds, even under quiescent conditions, compared to conventional fuels like methane (CH4), due to thermo-diffusive instabilities. These findings highlight hydrogen’s distinct combustion dynamics and providing a quantitative database for numerical models validation.