1 January 2023 in Vestnik MGSU
Introduction. Presently, intensively developing digital technologies can be contributed to theoretical models, engineering designs, as well as construction implementation methods. The article addresses the justification of a methodology underlying a deterministic model of construction work arrangements, designed to eliminate a methodological gap between theoretical methods of research and simulation, engineering methods of design and methods of implementing solutions to problems of construction processes. Materials and methods. Relations between the key sets of elements of construction processes were identified to justify the methodology, underlying the deterministic model of construction arrangements, using methods of the general theory of systems. Approaches to development of an organizational and technological platform in the construction industry and researches in the field of organizational and technological reliability of construction processes are also provided. Model elements are presented as a consolidated block diagram of methods, technological and administrative procedures, as well as construction process periods. The authors present a system for classifying theoretical models that are applicable to construction process research. Results. The methodology, underlying the deterministic model of construction process arrangements, is justified by a system of linear equations, describing construction process components. Construction process components are determined by the structural block diagram of construction process arrangement methods. Parameters and variables of equations convey a unified organizational and technological construction platform, and they can serve as a constituent of the criterion of meeting scheduled deadlines in the course of evaluating the organizational and technological reliability of the construction process. Conclusions. The methodology, underlying the deterministic model of construction process arrangements, based on the concept of an organizational and technological platform of construction processes, represents a structure of algorithms designed to coordinate decisions concerning construction processes, obtained using various methods. This coordination is implemented using sets of ratios between technological and organizational parameters of construction processes and the criterion of predicted time reserves needed for the implementation of current processes and related engineering operations, given that resources and time are still available according to the construction schedule.
1 April 2025 in Construction Materials and Products
Sustainable composites based on gypsum man-made stone are produced using a technology that excludes the firing stage. It meets the requirements for resource and energy conservation, does not harm the environment and can be used in the production of a number of biopositive building materials. The use of pure dihydrate gypsum from gypsum mold waste in the composition of sustainable gypsum composites predetermines the expansion of the scope of application of materials and products based on it. These wastes are characterized by stable physicochemical and mechanical properties. However, the features of the mineralogical composition require high costs for their use in the production of fired gypsum binders using classical technologies. Binders based on them have low strength and other physical indicators. Application without firing technology allows for the maximum use of all the unique properties of gypsum – creation of a comfortable environment, high resistance in fire conditions, good insulating characteristics, etc. By introducing highly dispersed basalt dust particles into the composition of stable gypsum composites based on dihydrate gypsum, gypsum stone is reinforced and compacted at the micro- and nanoscale levels. This is facilitated by the optimal values of the pressing force and humidity of the raw mix selected during the study. They are important technological parameters. The resulting high-strength gypsum composite is characterized by a fine-crystalline structure with higher performance indicators than conventional gypsum materials due to the screening of the moisture effect on it.
1 January 2022 in Строительное производство
Большинство отечественных и зарубежных исследований в части входного контроля материалов ограничиваются изучением возможностей программных комплексов с целью цифровизации существующих процедур. Поэтому представленная работа базируется на существующей общепринятой зарубежной практике, описанной во всевозможных справочниках и руководствах по данной теме за прошедшие 30 лет. В статье изучен зарубежный опыт по порядку проведения входного контроля поступающих материалов и его процедур. Даны рекомендации по изменению отечественного законодательства и стандартов касательно принципов проведения входного контроля, а также форм исполнительной...
1 April 2025 in Construction Materials and Products
The article presents the results of assessing the self-cleaning properties of lime coatings. The use of zinc oxide immobilized on synthesized aluminosilicates as a photocatalyst is considered. The technology of synthesis and properties of aluminosilicates are described. The photocatalytic activity of zinc oxide is analyzed depending on the technology of obtaining the photocatalyst. It was found that the band gap width of the photocatalyst obtained by immobilizing zinc oxide on synthetic zeolite decreased from 3.37 eV to 2.7 eV. Comparison of the self-cleaning ability of lime coating samples, in the formulation of which the photocatalyst was introduced, is carried out using the methods specified in the regulatory documentation- according to the test method in accordance with GOST R 57255-2016, according to the method of the Italian standard UNI 11259. The results of tests according to the methods established in regulatory documents indicate the high photocatalytic activity of the lime coating. It has been established that the lime coating with the use of zinc oxide photocatalyst immobilized on synthetic zeolite exhibits high photocatalytic activity. In accordance with the requirements of the Italian standard UNI 11259, the photocatalytic activity of the surface after 4 hours is R=21.94-55.42%, and after 26 hours – 51.96 - 98.2% depending on the specific surface of zinc oxide.
1 January 2022 in Строительное производство
Входной контроль материалов является первой стадией строительного контроля, от которого зависит все дальнейшее строительство. На данный момент входному контролю часто не уделяется должного внимания, в результате в работе используются материалы, не соответствующие проекту, имеющие явные и скрытые дефекты, без необходимой товаросопроводительной документации. Подрядчик также часто фальсифицирует результаты собственного контроля и пытается допустить в работу такие материалы. Все это происходит от недостатков системы строительного контроля и системы его документального оформления в составе исполнительной документации. В статье изучен порядок входного контроля поступающих материалов, его процедур и ответственности за проведение. Выявлены коллизии законодательства и стандартов, а также проблематика их практического применения. Произведен анализ форм, состава и характера оформления, а также практики проведения входного контроля. Даны рекомендации по изменению законодательства и стандартов касательно принципов проведения входного контроля, а также форм исполнительной...
18 September 2026 in Vestnik MGSU
Engineering aspect of a deterministic model of organizational and technological reliability in the construction of facilities in the Arctic region | Motylev | Vestnik MGSU Инженерная часть детерминированной модели организационно-технологической надежности строительства объектов в условиях Арктического региона | Мотылев | Вестник МГСУ