Densities, viscosities, refractive indices and ultrasonic velocities of the binary mixtures of acetophenone with ethyl acetate were measured over the entire mole fractions at 303.15, 313.15, and 323.15 K. From the experimental results, excess molar volumes VE, viscosity deviation Δη, refractive index deviation ΔnD, deviations in isentropic compressibility Δκs and excess intermolecular free length ΔLf are calculated. The viscosity values were fitted to the models of Krishnan-Laddha and McAllister. The thermophysical properties under study were fit to the Jouyban-Acree model. The excess values were correlated using Redlich-Kister polynomial equation to obtain their coefficients and standard deviations. The data obtained fitted with the values correlated by the corresponding models very well. The results are interpreted in terms of molecular interactions occurring in the solution.
The present work explored biosorption of Zn(II) ions from aqueous and zinc-bearing factory effluent using marine seaweed Ulva lactuca. The batch pH edge experiments using aqueous zinc solution indicated that Zn(II) uptake by U. lactuca was found to be maximum at pH 4.5 and the batch isotherm trials performed at pH 4.5 resulted in maximum uptake capacity of 128.0 mg Zn(II)/g. With 0.1 M CaCl2 (pH 3.5, HCl) as elutant, the elution of Zn(II) ions from Zn(II)-laden U. lactuca biosorbent was effective with possible regeneration and reuse for three cycles. The zinc industrial effluent was found to comprise of 87.8 mg/L of zinc ions along with excess co-ions and high total dissolved solids (838.1 mg/L). Owing to this, Zn(II) uptake from electroplating effluent by U. lactuca was suppressed due to competition from other ions. Continuous-flow sorption trials were conducted at flow rate of 5 mL/min in an up-flow fixed column. The existence of surplus competing ions in zinc wastewater influenced the Zn(II) biosorption by U. lactuca. U. lactuca-loaded packed column exhibited uptakes of 78.3 and 70.8 mg Zn(II)/g for aqueous solution and effluent, respectively. The results of three continuous sorption–desorption cycles demonstrated that reuse of U. lactuca biosorbent in remediation of zinc-containing wastewaters was practical and economical.
3 December 2018 in Separation Science and Technology
In the present investigation, date seed-derived biochar was applied as economic and effective sorbent for remediation of reactive dye from contaminated solutions. Biochar produced at 350°C through pyrolysis process exhibited reactive black 5 (REB5) sorption capacity 2.7 times higher than virgin date seeds. The surface of biochar was analyzed through Fourier transform infrared and scanning electron microscope data. The maximum REB5 uptake determined through the Langmuir model was found to be 113.4 mg/g. The REB5 sorption kinetics were accurately described by the pseudo-first-order model than pseudo-second-order model. Thermodynamic parameters indicated that REB5 sorption was spontaneous, feasible, and endothermic process.
1 January 2018 in Environmental Technology Reviews
Remediation of heavy metal contaminated aqueous streams is of utmost importance due to recalcitrant and persistent behaviour of heavy metals in environment. Traditional removal techniques used for the remediation of toxic heavy metals are either costly or inefficient as well as produce enormous quantity of toxic chemical sludge. On the other hand, biosorption is evolving as an alternative treatment method to the traditional methods for remediation as well as selective recovery of metal ions from contaminated waters. Biosorption presents several inherent merits over other conventional as well as biological methods such as cost-effectiveness, high sorptional uptake, biological or chemical sludge minimization, regeneration/reuse of biosorbents, operation over wide range of physico-chemical conditions as well as possibility of metal recovery. Of the various biosorbents, ocean-based sorbent materials are copious and economical biosorbents for metal-bearing wastewaters. Seaweeds, crab shell, sea grass, seashell and fish scales are studied as ocean-based sorbents for various metal ions. The inherent chemical composition as well as the presence of various functional groups (carboxyl, amine, phosphonate, etc.) enabled the ocean-based sorbents to perform well in metal biosorption. The scope of this present review paper is to collate scattered existing information/results on different ocean-based waste materials utilized as sorbent for various metal ions. In addition, the application of ocean-based sorbents to real metal-bearing wastewaters was also evaluated.
Densities, viscosities, refractive indices and ultrasonic velocities of the binary mixtures of Acetophenone with Methyl acetate were measured over the entire mole fractions at (303.15, 313.15 and 323.15) K. From these experimental results, excess molar volumes VE, viscosity deviation ∆η, refractive index deviation ∆nD, deviations in isentropic compressibility ∆Ks and excess intermolecular free length ∆Lf are calculated. The viscosity values were fitted to the models of Krishnan‐Laddha and McAllister. The thermo physical properties under study were fit to the Jouyban ‐ Acree model. The excess values were correlated using Redlich‐Kister polynomial equation to obtain their coefficients and standard deviations. It was found that in all cases, the data obtained fitted with the values correlated by the corresponding models very well. The results are interpreted in terms of molecular interactions occurring in the solution.