Four grounded coplanar waveguide (GCPW)-fed open-slot antennas conjoined into a cross shape with a central circular slot are presented for 4 × 4 fifth-generation (5G) multi-input multi-output (MIMO) operation in 3.3 GHz ∼ 4.2 GHz. The four conjoined slot antennas have a 1 mm low profile (about 0.01λ at 3.3 GHz) and a compact size of 42 mm × 42 mm (about 0.46λ × 0.46λ at 3.3 GHz) to provide four wide operating bands (about 24% centered at 3.75 GHz) with antenna efficiency better than 40%. The conjoined circular slot leads to enhanced operating bandwidth of the four slot antennas and good decoupling thereof. Owing to the 1 mm low profile, the conjoined slot antennas are promising to be integrated within the dielectric back cover of the 5G terminal device, thereby decreasing the antennas’ volume inside the device. Details of the GCPW-fed conjoined slot antennas for 5G MIMO operation are presented.
11 July 2018 in IEEE Transactions on Antennas and Propagation
Six antennas placed on the short edges of the metal-framed smartphone for the LTE (long-term evolution) MIMO (multi-input multi-output) operation are presented. The six-antenna structure comprises three antennas placed on the top edge of the smartphone and three antennas placed on the bottom edge thereof. The three antennas on the bottom edge are identical to those on the top edge. Each three-antenna structure consists of one inverted-F antenna (IFA) that covers the LTE low band (LB) in 698~960 MHz and two open-slot antennas (OSAs) that cover the LTE middle/high bands (M/HB) in 1710~2690 MHz. The three-antenna structure is compactly integrated, with the IFA placed between two OSAs, to fit in one short edge of the smartphone. Additionally, the presence of the IFA is able to decrease the mutual coupling between two OSAs in the LTE M/HB. Furthermore, two IFAs at opposite short edges can also show good decoupling to have decreased envelope correlation coefficients (ECCs) in the LTE LB. The six antennas at two short edges can therefore achieve good performances for 2 × 2 LTE LB MIMO and 4 × 4 LTE M/HB MIMO operations.
6 October 2022 in IEEE Antennas and Propagation Magazine
Recent wireless communication systems, including the 5G communication New Radio (NR) operating in the millimeter-wave (mm-wave) bands, demand performance measurements using an over-the-air (OTA) test instead of using the traditional conducted methods. This article provides an overview of various OTA measurement systems that measure the integrated antenna inside a 5G-and-beyond mm-wave device, including the direct far-field (DFF), indirect FF (IFF), near-field (NF), and midfield measurements. By considering several significant parameters, including minimum measurement distance required, metrics that can be measured, and complexity of the electrical and mechanical components of the system, suitable OTA measurement methods for integrated antennas can be selected. Furthermore, factors contributing to the measurement uncertainty of OTA systems based on the technical report (TR) of the 3rd Generation Partnership Project (3GPP) are summarized and discussed. By analyzing the significant parameters of each OTA system and contributors of the measurement uncertainty, the reader can determine the OTA method that is most suitable to measure the integrated antennas for mm-wave communications.
10 January 2018 in Microwave and Optical Technology Letters