In this letter, we develop two types of refractive index based sensors using single-mode fiber (SMF-28) to sense hazardous toxic gases in underground mines. The first sensor design is simply a graphene-oxide (GO) deposited long period grating (LPG) and second sensor consist of two LPGs with an interspacing distance of 1 cm ( $\Delta \text{l}$ ) acting as Mach-Zehnder interferometer (MZI). In addition, we also confirm GO deposition on the SMF using ultraviolet–visible spectroscopy, atomic force microscopy (AFM), and field emission scanning electron micrograph (FESEM). Our experiment results show that the sensitivity of two-LPGs based fiber optic sensor (S LPG −2 = 76.32 dB/RIU) is higher as compared to the single LPG sensor (S LPG −1 = 54.65 dB/RIU). Hence, reported graphene oxide deposited long period grating sensor possess better sensitivity and can detect maximum $1.52\times 10^{-5}$ index variation in the optical telecommunication band.
13 April 2018 in IEEE Photonics Technology Letters
A 3-D vertical hybrid plasmonic switch having vanadium oxide (VO 2 ) Bragg grating element inside a silicon waveguide has been modeled and simulated in this letter. Narrow bandwidth (30 nm) switching has been achieved maintaining 11.14-dB extinction ratio (ER) at 1.55 μm, effectively due to tailoring VO 2 refractive index via heat-induced phase transition. Furthermore, switching response has been assessed by tailoring the number of VO 2 fins within the silicon waveguide, oxide spacer dimension, width and height of the silicon waveguide as well, which have impact on the switch behaviour. From numerical simulations, we have found that for 933.4-nm device length with three VO 2 fins ~ 11.14-dB ER and 1.57 figure of merit at 1.55-μm wavelength can be obtained.
18 September 2020 in Journal of Nanoparticle Research
A nanoscale 3D hybrid plasmonic waveguide (HPWG) refractive index-cum- temperature sensor has been proposed and simulated in this work. The aqueous analyte (benzene C 6 H 6 ) sensing is possible over the wavelength range from $1.18~\mu \text{m}$ to $2.2~\mu \text{m}$ . A well-known refractive index (RI) sensing method (or wavelength interrogation) is considered for the proposed Si-TiO 2 -SiO 2 -Au nanostructure. The sensor design includes, titanium dioxide (TiO 2 ) layer deposited over the silicon dioxide to enhance the overall sensitivity of the HPWG sensor. The finite element method (FEM) based 3D-numerical simulations are performed for an IR band signal, predicting 1022.75 nm/RIU device sensitivity and 2.95 nm/°C temperature sensitivity. The proposed sensor is suitable for next-generation on-chip biochemical sensing applications with nanoscale dimensions, low cost, and high sensitivity.
a dual-band stop vertical hybrid plasmonic filter based on silicon nitride fin Bragg grating (FBG) is designed and simulated in the infra-red (IR) band. It consists of two silicon nitride fin Bragg gratings embedded in the silicon waveguide separated by LSP spacing. Finite element method based 3DCOMSOL simulation shows two stop band wavelengths at 1.462 μm and 1.515 μm, respectively. Furthermore, its on-chip methane gas sensing application for coal mines is also investigated. The proposed filter-cum-sensor is complementary metal oxide semiconductor (CMOS) compatible demonstrating 856.50 nm/RIU sensitivity, 120 RIU-1 figure of merit, 6.34x10-2 RIU limit of detection & 0.52 nm/K temperature sensitivity.