In this work, using a mechanochemical solid-phase synthesis method, ZrO2—CeO2 ceramics doped with yttrium were obtained, which have great prospects for use as a basis for dispersed nuclear fuel materials or inert nuclear fuel matrices. The purpose of this work was to study the formation of the ZrO2—CeO2 phase composition, depending on the concentration of yttrium dopant, as well as to study their structural and strength properties. The relevance of this study is in obtaining new data on the properties of composite ceramics based on oxides having a cermet structure, as well as the effect of doping with yttrium on increasing the resistance of ceramics to deformation and thermal properties. During the studies, the dynamics of the phase transformations depending on the concentration of the dopant, as well as changes in the structural characteristics and dislocation density, were established. It was found that at a dopant concentration of 0.25 mol, the main phase in the structure was Ce3ZrO8–triclinic P1 (1), the formation of which led to an increase in the mechanical and strength properties of the ceramics as well as a 1.5-fold increase in the thermal conductivity coefficient.
1 November 2019 in International Journal of Hydrogen Energy
The paper presents the procedure for planning an experiment to create standard sets of reagents for a technetium-99m generator based on glucose derivatives. All stages are presented from researching the required quantities of a substance, a reducing agent, a stabilizer and auxiliary components to developing lyophilized kits and conducting quality control. The radiochemical purity of radiopharmaceuticals prepared on the basis of the developed kits ranged from 90.0 to 99.0%. We also showed the functional suitability of the developed preparations on C57B1/6j mice with an implanted malignant tumor - Lewis lung carcinoma.
1 January 2024 in Science and Technology of Nuclear Installations
The narrow fraction of the cenospheres of coal fly ash (30−50 μm; glass phase ∼ 90 wt. %) was used for the preparation of β‐emitting 177Lu‐bearing aluminosilicate microspheres. Two methods of chemical modification to encapsulate 177Lu3+ in the cenosphere’s aluminosilicate matrix were used, such as the formation of (i) microporous or (ii) meso/macroporous structure in the cenosphere shell followed by 175+176Lu3+ sorption. Conversion of Lu‐loaded microspheres into poorly soluble forms was performed via the thermal treatment at 900–1200°C and then 176Lu was transformed to 177Lu by neutron activation procedure in a nuclear reactor. The 176Lu‐bearing products were studied by PXRD, SEM, and EDX spectroscopy methods. It was established that the acid treatment of cenospheres resulting in a meso/macroporous structure in the cenosphere shell is the optimal nondestructive method to produce a microsphere precursor for Lu incorporation. The neutron activation of 176Lu‐bearing microspheres resulted in 177Lu‐microspheres that provide the specific radioactivity of 4.5 GBq/100 mg. The Lu leaching rate from 177Lu‐microspheres in a blood simulator determined according to the State Standard (GOST) R 52126‐2003 was about 10−6−10−7 g/cm2⋅day.