This paper proposes a new amplifier architecture based on the outphasing technique intended for the efficiency enhancement of linear amplification with nonlinear components (LINC) transmitters. The proposed mode-multiplexing linear amplification with nonlinear components (MM-LINC) scheme operates according to the LINC concept for input signal magnitude drive levels below a certain threshold and as a balanced amplifier beyond this threshold. The setting of this threshold level influences the performance of the amplifier in terms of average power-added efficiency and linearity. A 2-W up-link transmitter prototype for worldwide interoperability for microwave access (WiMAX) applications was designed using this new architecture and optimized for a WiMAX signal with an 11.3-dB peak-to-average power ratio. The experimental results revealed a significant increase in power-added efficiency, from 6% for a LINC transmitter to 21% for the MM-LINC amplifier, while maintaining an error vector magnitude value under 8%, which is compliant with the standard requirement
In this paper a non-uniform sampling (NUS) technique for controlling analog-to-digital conversion (ADC) in a multistandard radio receiver is proposed. In this context of wide band radio signals, the NUS-based ADC offers the advantages of relaxing antialiasing filter constraints and decreasing the "mean" of the sampling frequency. This leads to ADC power consumption reduction. The improvement given by this concept is shown through the design of WiMax/WiFi radio receiver where NUS performances are enhanced by choosing the cubic spline interpolation for digital reconstruction filter. Simulation results show that designed receiver meets ADC dynamic ranges for WiMax/WiFi with 12-bit quantizer and 8-quantization time factor.
1 July 2003 in Analog Integrated Circuits and Signal Processing
This paper presents an improved sampling-based downconversion topology design for multi-standard RF subsampling receiver. Wideband RF receiver architecture is proposed for multimode processing with high-level integration. By an appropriate choice of subsampling frequency complete multistandard RF bands are downconverted to IF domain. Baseband downconversion is achieved by a second subsampling stage. Original results are presented for the analogue IF bandpass anti-aliasing filter design by addressing optimization of sampling frequencies choice adapted to GSM, UMTS and IEEE-802.11g multistandard radio receiver. ADS simulation results are presented to evaluate designed subsampling downconversion stage performances.
This paper presents the design of implicit filtering for out-of-channel interferers in continuous-time (CT) quadrature bandpass (QBP) ΔΣ modulator using a differentiated signal-transfer-function (STF). Comparative study between possible ΔΣ modulator loop filter structures is addressed to better cope with the best implementation. The Fifth-order CT QBP ΔΣ modulator planned for the WiFi adjacent channel blockers requirements, illustrates clearly the totally elimination of interferers and the correctly signal process. This led to remove the baseband filter and PGA at the price of a very challenging ADC with merged-in cited functionalities. So, less analog components, low power consumption and high performance for the low-IF receiver.
This paper describes design and circuit implementation of phase analog-to-digital data converter for radio receiver compliant with IEEE 802.15.4 standard. Standard specifications are considered to calculate the ADC dynamic range. A trade off between power consumption and phase resolution is defined to optimise the phase ADC design. Simulation results are presented to analyse ADC circuit implementation performances.