Mohamed Helaoui

Mohamed Helaoui

Auto-generated profile, based on publicly available information

Mohamed Helaoui

Radio Lab, Department of Electrical and Computer Engineering, Schulich School of Engineering, Calgary, Canada

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 October 2010 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
FGFadhel Ghannouchi
Fadhel Ghannouchi
SHSafar Hatami
Safar Hatami
PAPouya Aflaki
Pouya Aflaki
MHMohamed Helaoui
Mohamed Helaoui
RNRenato Negra
Renato Negra
This paper proposes a new closed-form expression for computing the power efficiency of delta-sigma (DS) radio frequency (RF) transmitters. Due to the large bandwidth of the pulsewidth modulated (PWM) signal at the output of the DS modulator, the peak efficiency of the power amplifier (PA) when driven by a PWM signal is considerably different than its peak efficiency when the input signal is a continuous sine wave. A weight averaging of the efficiency over the frequency bandwidth of the PWM signal is considered for accurate estimation and prediction of the power efficiency of DS RF transmitters. It is shown that, for a low-pass DS transmitter, the overall average power efficiency of the DS transmitter can be accurately estimated by the product of the modulated peak efficiency of the PA and the coding efficiency of the modulator. For bandpass DS transmitters, an additional parameter that accounts for the duty cycle effect on the efficiency of switching-mode PAs has to be considered. To validate the new proposed expression, a DS transmitter for WiMAX, CDMA and EDGE standards is designed, prototyped and tested. The comparison of the simulated and measured efficiencies of the DS transmitter proves the validity and accuracy of the proposed expression.

6 October 2011 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
DSDhikra Saffar
Dhikra Saffar
NBNoureddine Boulejfen
Noureddine Boulejfen
FGFadhel Ghannouchi
Fadhel Ghannouchi
AGAli Gharsallah
Ali Gharsallah
MHMohamed Helaoui
Mohamed Helaoui
This paper proposes a novel behavioral model for multiple-input single-output (MISO) and multiple-input multiple-output (MIMO) nonlinear transmitters based on multivariable polynomials (MVPs). The main source of nonlinearity in these transmitters is the RF power amplifier, which is commonly modeled using polynomial models. The proposed MVP model is capable of handling the nonlinear effects of the RF transmitters, as well as the linear and nonlinear crosstalk between the input signals. At the same time, the developed model was optimized for computing efficiency without compromising its accuracy. The model was tested for MISO and MIMO wireless transmitters. The simulations and measurement results revealed that the proposed model gives excellent accuracy when modeling MIMO transmitters with different branch coupling factors.

5 February 2007 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
MHMohamed Helaoui
Mohamed Helaoui
SBSlim Boumaiza
Slim Boumaiza
FGFadhel Ghannouchi
Fadhel Ghannouchi
AKAmmar Kouki
Ammar Kouki
AGAdel Ghazel
Adel Ghazel
This paper proposes a new amplifier architecture based on the outphasing technique intended for the efficiency enhancement of linear amplification with nonlinear components (LINC) transmitters. The proposed mode-multiplexing linear amplification with nonlinear components (MM-LINC) scheme operates according to the LINC concept for input signal magnitude drive levels below a certain threshold and as a balanced amplifier beyond this threshold. The setting of this threshold level influences the performance of the amplifier in terms of average power-added efficiency and linearity. A 2-W up-link transmitter prototype for worldwide interoperability for microwave access (WiMAX) applications was designed using this new architecture and optimized for a WiMAX signal with an 11.3-dB peak-to-average power ratio. The experimental results revealed a significant increase in power-added efficiency, from 6% for a LINC transmitter to 21% for the MM-LINC amplifier, while maintaining an error vector magnitude value under 8%, which is compliant with the standard requirement

6 December 2007 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
SBSlim Boumaiza
Slim Boumaiza
MHMohamed Helaoui
Mohamed Helaoui
OHOualid Hammi
Oualid Hammi
TLTaijun Liu
Taijun Liu
FGFadhel Ghannouchi
Fadhel Ghannouchi
This paper proposes a comprehensive and systematic characterization methodology that is suitable for the forward and reverse behavior modeling of wireless transmitters (Txs) driven by wideband-modulated signals. This characterization approach can be implemented in adaptive radio systems since it does not require particular signal or training sequences. The importance of the nature of the driving signal and its average power on the behavior of radio-frequency Txs are experimentally investigated. Critical issues related to the proposed characterization approach are analytically studied. This includes a new delay-estimation method that achieves good accuracy with low computational complexity. In addition, the receiver linear calibration and its noise budget are investigated. To demonstrate the accuracy and robustness of the proposed method, a full characterization (including the memoryless nonlinearity and the memory effects) of a 100-W Tx driven by a multicarrier wideband code-division multiple-access signal is carried out, and its forward and reverse models are identified. Cascading the identified reverse model derived using the proposed methodology and the Tx prototype leads to excellent compensation of the static nonlinearities and the memory effects exhibited by the latter. Critical issues in implementing this approach are also discussed.

24 April 2012 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
SBSeyed Aidin Bassam
Seyed Aidin Bassam
AKAndrew Kwan
Andrew Kwan
WCWenhua Chen
Wenhua Chen
MHMohamed Helaoui
Mohamed Helaoui
FGFadhel Ghannouchi
Fadhel Ghannouchi
This paper demonstrates an energy-efficient and low-complexity subsampling receiver adopted in the feedback loop of the dual-band power amplifier (PA) linearization architecture. The challenges and issues on finding the valid subsampling frequencies in nonlinear system are discussed, and a systematic approach for finding valid subsampling frequencies is presented. The subsampling-based receiver is applied as a proper solution for the feedback loop of the dual-band linearization architecture. It is shown that the subsampling feedback loop reduces the complexity and the cost of the dual-band linearization architecture. The simulation and measurement results show the proper functionality of the presented technique and demonstrate a good linearization performance. The measurement results show that when using this method, more than 15-dB improvement in normalized mean squared error and more than 17-dB improvement in adjacent channel power ratio are achieved for a wideband class-AB PA, compared with the unlinearized method.

14 November 2014 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
AKAndrew K. Kwan
Andrew K. Kwan
MYMayada Younes
Mayada Younes
FGFadhel Ghannouchi
Fadhel Ghannouchi
SZSilong Zhang
Silong Zhang
WCWenhua Chen
Wenhua Chen
OHOualid Hammi
Oualid Hammi
This paper reports an envelope tracking (ET) transmitter architecture for multi-band/widely-spaced carrier signals. Due to the bandwidth limitations of the envelope modulator, the dynamic supply voltage is controlled by combining the low frequency envelopes of the multi-inputs rather than the true composite envelope of the input signals. The ET transmitter is tested for dual-band and tri-band power amplifiers (PAs) operating in concurrent mode using various bandwidth carrier aggregated long term evolution (LTE) signals. The transmitter is linearized using a phase-aligned Volterra digital predistortion that considers the inter-modulation distortion (IMD) products around the carrier frequencies as well as the third-order IMD products in the tri-band case. Experimental results are shown to validate the proposed techniques for linearization and efficiency enhancement of the multi-band ET transmitter and compared to the case of fixed supply biasing of the PA.