Xikang Cheng

Xikang Cheng

Auto-generated profile, based on publicly available information

Xikang Cheng

Key Laboratory for Precision and Non-Traditional Machining Technology of the Ministry of Education, Dalian University of Technology, Dalian 116024, China

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 January 2020 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
CXCheng Xikang
Cheng Xikang
WLWei Liu
Wei Liu
Yang ZhangYang Zhang
Yang Zhang
LSLiu Sitong
Liu Sitong
LWLuo Weiqi
Luo Weiqi
In this article, a concise and practical analytical method of transmitted torque calculation for pre-design of Axial Permanent Magnetic Coupler (APMC) by combining Faraday's law with magnetic circuit model is proposed. The proposed method is able to consider the three-dimension (3D) edge magnetic effect as well as the induced magnetic field generated by eddy currents. The correctional skin depth factor is also taken into consideration. In order to verify the validity of the proposed method, the 3D finite element method (FEM) is employed. The results present that the relative error between the proposed method and 3D FEM in the normal working slip range is within 5.2%. Finally, detailed analysis is carried out to investigate the influence of the common parameters on the transmitted torque for APMC. Moreover, the deficiencies of this proposed method and the corresponding design considerations are also discussed, which offers useful and auxiliary information for the pre-design of APMCs.

4 October 2019 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
WLWei Liu
Wei Liu
HDHongtu Di
Hongtu Di
Yang ZhangYang Zhang
Yang Zhang
YLYongkang Lu
Yongkang Lu
XCXikang Cheng
Xikang Cheng
ZJZhenyuan Jia
Zhenyuan Jia
Laser stripe plays an important role in industrial vision measurement as the major auxiliary feature. Existing researches mainly focus on the application of small size parts. However, with the increase of field of view, it is difficult to extract laser stripes robustly in varying field measurement situations for the complex background, low proportion and uneven characteristic of laser stripes. To increase the measurement adaptability in complex environment, an automatic laser stripe detection and segmentation algorithm is proposed. First, the dataset is constructed by a large number of image patches collected in the field and laboratory, and laser stripe patches in the imbalanced dataset are expanded by data augmentation method. Next, the detection of the laser stripe is initially realized based on the training results of the convolutional neural network (CNN), and then the laser stripe is accurately detected by non-feature filtering criteria based on area constraints. Finally, a sub-regional feature clustering method is proposed to realize effective segmentation of uneven laser stripes. A large number of verification experiments have been carried out in both laboratory and field, and the results show that the proposed method can achieve automatic and accurate extraction of laser strips, which has strong adaptability to both the complex background in the field and the uneven brightness characteristic of laser stripes, satisfying the engineering requirements of large-scale parts field measurement.

17 November 2020 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
XCXikang Cheng
Xikang Cheng
WLWei Liu
Wei Liu
WLWeiqi Luo
Weiqi Luo
ZTZiliang Tan
Ziliang Tan
SLSitong Liu
Sitong Liu
Temperature estimation is highly significant in the design stages and analysis of permanent magnet (PM) machines. In this paper, for permanent magnet couplers (PMCs), a semi-analytical model to estimate the temperature is developed, which is able to give consideration to efficiency and applied in more complicated structure. Also, the magnetic flux path, as well as the eddy currents, are depicted through a simplified geometric topology. Moreover, the eddy current loss, taken as the heat source loss, is effectively and quickly calculated by employing magnetic equivalent circuit and Kirchhoff's law. Compared with the experimental results, this model has a good agreement with the experimental results where the deviation is within 6.67%. Finally, some constructive suggestions have been given for prediction, optimization and monitoring of PMCs.

24 September 2020 in Energies
Verified
Journal Article
Open access
PDF file
XCXikang Cheng
Xikang Cheng
WLWei Liu
Wei Liu
ZTZiliang Tan
Ziliang Tan
ZZZhilong Zhou
Zhilong Zhou
BYBinchao Yu
Binchao Yu
SLSitong Liu
Sitong Liu
Thermal analysis is exceptionally important for operation safety of axial permanent magnet couplings (APMCs). Combining a finite element method (FEM) with a lumped-parameter thermal network (LPTN) is an effective yet simple thermal analysis strategy for an APMC that is developed in this paper. Also, some assumptions and key considerations are firstly given before analysis. The loss, as well as the magnetic field distribution of the conductor sheet (CS) can be accurately calculated through FEM. Then, the loss treated as source node loss is introduced into the LPTN model to obtain the temperature results of APMCs, where adjusting conductivity of the CS is a necessary and significant link to complete an iterative calculation process. Compared with experiment results, this thermal analysis strategy has good consistency. In addition, a limiting and safe slip speed can be determined based on the demagnetization temperature permanent magnet (PM).

6 January 2022 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
WLWeiqi Luo
Weiqi Luo
WLWei Liu
Wei Liu
XCXikang Cheng
Xikang Cheng
Yang ZhangYang Zhang
Yang Zhang
ZJZhenyuan Jia
Zhenyuan Jia
Permanent magnet eddy current couplings (PMECCs) are widely used in industry to transmit torque through their interior magnetic field. It is important to measure the interior magnetic field of a PMECC, which helps ensure its excellent performance and prevent possible accidents. However, the distribution of magnetic fields is difficult to reconstruct in situ by traditional measuring or modeling approaches. This article proposes a method to continuously reconstruct the distribution of interior magnetic fields and estimate the relative parameters in a short time with a limited number of Hall sensors. A model of field-associated reconstruction (FAR) is proposed to reconstruct the distribution of interior magnetic fields using historical data and sensor positions as constraints. The slip and output torque can be estimated based on the FAR without the need to use additional speed–torque sensors. The experimental results verify the performance of the proposed method. The results show that the model performed well in the reconstruction of axial and tangential components and relatively well near the geometric boundary in the reconstruction of radial components. The relative errors in the speed and torque estimations are approximately 4% and 6%, respectively. The limitations and corresponding reasons are also discussed.

24 February 2025 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
WLWei Liu
Wei Liu
WLWeiqi Luo
Weiqi Luo
XCXikang Cheng
Xikang Cheng
MZMengde Zhou
Mengde Zhou
A permanent magnet coupler (PMC) is a novel non-contact coupling product transmitting torque through complex electromagnetic behaviors. However, its monitoring processes rely on finite single-point sensors, which makes it difficult to characterize the multi-field states in the PMC with limited measurement information. To address the above issue, this article proposes a measurement-physic constrained neural network (MPCNN) for the multi-field reconstruction of the PMC, incorporating both the measured MF boundaries and physical knowledge. First, to integrate the limited measurement information, a coefficient decomposition method is proposed to integrate and embed governing equations and various boundary conditions into the loss function of the MPCNN by the multi-order coefficient vectors. Then, the location configuration of the Hall sensor array is optimized to obtain better measurement boundaries. A series of Boundary conditions are formulated based on the homogeneous conditions and the MF data measured by the optimized sensors array. The immeasurable fields in the copper layer and the key performances are also estimated at an arbitrary slip and air gap using the MPCNN. Finally, the proposed model is verified and assessed in various aspects. The results show that the proposed MPCNN model is highly compatible with the physical governing equations and measurement boundary conditions.