11 June 2018 in IEEE Transactions on Magnetics
The phenol formaldehyde (PF), a kind of heat-resistant binder, was used to prepare bonded Nd-Fe-B magnets via mold pressing. The magnetic properties, compressive strength, and microstructure of the magnets were systematically investigated. The magnetic measurements show that PF binder endows Nd-Fe-B magnets excellent magnetic properties. Moreover, the magnets can keep the original shape and exhibit usable magnetic properties at 200 °C. With increasing binder content, the compressive strength of the magnets reach 253.6 MPa with 4 wt.% PF binder, which is 14 times higher than that of epoxy resin bonded Nd-Fe-B magnets. In addition, the reason of high compressive strength was investigated. The main chain of PF binder molecule contains rigid structure like benzene rings, which can form hard cross-linking network structure in the gaps of magnetic powders making the bonded magnets with high strength. Further fracture surface morphology observation and energy dispersive X-ray analysis reveal that liquid PF binder can permeate into gaps between the magnetic powders during the process of warm-molding and exert excellent bonding effect. Two mechanisms of action can endow PF/Nd-Fe-B magnets excellent mechanical strength and heat resistance.
13 August 2018 in IEEE Transactions on Magnetics
Microstructure and magnetic properties of hot deformed SmCo 5 nanocrystalline magnet prepared from amorphous precursors are investigated. Hot pressed magnet as a precursor of the hot deformed magnet is amorphous. After hot deformation process, the SmCo 5 magnet with 85% height reduction exhibits CaCu 5 crystal structures and the strong c-axis textures. Moreover, the hot deformed SmCo 5 magnet bears magnetic properties of $H_{\mathrm{ ci}} = 31.4$ kOe, $M_{r} = 6.42$ kG, $(BH)_{\max} = 10.1$ MGOe, and the remanence ratio of the magnet is as high as 0.87 due to the strong c-axis textures. In addition, fracture morphology shows that grains of the hot deformed magnet are plate shaped with an average grain size of 200 nm in thickness and 800 nm in diameter. Furthermore, the grain size of the magnet from transmission electron microscopy (TEM) observation has a good agreement with the scanning electron microscopy results. The TEM results also show that a lot of Sm-rich Sm-Co precipitate particles with a size less than 50 nm. These precipitate particles could act as pinning sites leading to high coercivity.
3 July 2020 in IEEE Transactions on Magnetics
With the development of bonded Nd-Fe-B magnets, modifying epoxy resin (EP) binder has become a key factor to improve the properties of bonded Nd-Fe-B magnets. In this work, the magnetic properties, compressive strength, and microstructure of the bonded Nd-Fe-B magnets with diaminodiphenylmethane (DDM)-cured EP binder were systematically investigated. The results show that adding 20 wt% DDM to EP monomer maintains excellent magnetic properties while obtaining optimal temperature resistance and high compressive strength for magnets. Because the molecular structure of the DDM curing agent contains rigid groups, it can enhance the heat resistance and mechanical properties of the EP binder. In addition, fracture surface morphology observation reveals the bonding mechanism of DDM-EP bonded magnets and confirms the advantageous nature of DDM-EP binder for bonded magnets.
28 September 2018 in IEEE Transactions on Magnetics
Macroscopic hysteresis loops and microscopic magnetic moment distributions have been determined by 3-D model for Co nanowire with various easy axis deviations from applied field. It is found that both the coercivity and the remanence decrease monotonously with the increase of easy axis deviation as well as the maximum magnetic product, indicating the large impact of the easy axis orientation on the magnetic performance. Moreover, the calculated angular distributions and the evolution of magnetic moments have been shown to explain the magnetic reversal process. It is demonstrated that the large demagnetization field in the two ends of the nanowire makes the occurrence of reversal domain nucleation easier, hence the magnetic reversal. In addition, the magnetic reversal was illustrated in terms of the analysis of the energy evolution.