10 November 2022 in Proceedings of the IEEE
In order to overcome the capacity limitations of current lightwave systems based on the single-mode optical fiber, massively parallel transmission in the spatial domain [space-division multiplexing (SDM)] supported by extended parallelism in the frequency domain (ultrawideband (UWB) systems) must be used. This article reviews key aspects of parallel transmission systems as the only significant capacity scaling option going forward and discusses the various tradeoffs on an architectural level and a hardware integration level. In doing so, this article also serves as an introduction to the more detailed accounts of fiber-optic systems and their future scaling within this Special Issue of the Proceedings of the IEEE.
7 February 2017 in Journal of Optical Communications and Networking
Space division multiplexing (SDM) is mainly seen as a means to increase data throughput and handle exponential traffic growth in future optical networks. But its role is certainly more diverse. Research on SDM encourages device integration, brings new functionality to network elements, and helps optical networks to evolve. As a result, the number of individual components in future networks will decrease, which in turn will improve overall network reliability and reduce power consumption as well as operational expenditure. After reviewing the state-of-the-art in SDM fiber research and development with a particular focus on weakly coupled single-mode multi-core fibers, we take a look beyond the capabilities of SDM as a means of boosting transmission capacity and discuss ideas and concepts on how to exploit the spatial dimension for improved efficiency and resource sharing in optical networks.
24 January 2019 in Journal of Lightwave Technology
We demonstrated simultaneous usage of 228 spatial channels (effectively) within a strand of fiber. We fabricated a 13- km 39-core 3-mode fiber and constructed a bi-directional SDM transmission setup by using cascaded spatial multiplexers on both fiber ends. Aggregated inter-core crosstalk and return loss of the system were below -35 dB and above 31 dB, respectively, over the C and L bands. The feasibility of using bi-directional SDM transmission was investigated using 10 GBaud, 37.38-Gb/s dualpolarization QPSK signals at 1550 nm and coherent detection with a 6 × 6 MIMO equalizer. Excellent transmission properties were obtained for most spatial channels.
14 October 2019 in Journal of Lightwave Technology
We describe a series of optical transmission experiments based around single-mode multi-core fiber (MCF) amplified with 19-core, C + L band Erbium-doped fiber amplifier (EDFA). The cladding-pumped amplifier uses two fan-cooled multi-mode pumps in each of C and L band to provide gain bandwidth over more than 75 nm. For recirculating transmission of PDM-16QAM signals on 345 wavelength carriers between 1530.52 nm and 1605.52 nm, we measure 0.715 Pb/s transmission over a distance of 2009 km (64 recirculations), equivalent to a throughput-distance product of 1.44 exabit/s x km. Next, using PDM-QPSK modulation, we investigate trans-oceanic transmission distances, measuring throughputs of 18.6 Tb/s and 14.5 Tb/s in 2 cores after 255 recirculations, a distance of 8007 km. Further, we evaluate the combined EDFA and fiber crosstalk penalties showing a core and wavelength dependence in agreement with previous MCF crosstalk measurements. These results demonstrate the potential of high core-count EDFAs to combine both high capacity transmission over transoceanic distances with benefits of SDM integration.
20 August 2020 in Journal of Lightwave Technology
High capacity transmission with a data rate over 10.66 Pb/s is demonstrated in a 13 km, 38-core-3-mode few-mode multi-core fiber. This was achieved with a single optical comb source to generate 368 x 24.5 GBaud 64- or 256-quadrature-amplitude-modulated signals in a 25 GHz wavelength channel spacing in combination with a few-mode multi-core fiber with high uniformity amongst cores. We investigated the essential transmission channel characteristics and found that mode-dependent loss strongly decreases the achievable data-rates in some cores, while we did not find a correlation between increased impulse response spread and data-rate. We further have found no influence of the (radial) position of a core within the cladding on the data-rate. We further explored the potential of multi-span transmission over the same fiber with transmission distances up to 65 km, showing a strong performance penalty from prototype components with sub-optimal transmission properties.