In order to overcome the capacity limitations of current lightwave systems based on the single-mode optical fiber, massively parallel transmission in the spatial domain [space-division multiplexing (SDM)] supported by extended parallelism in the frequency domain (ultrawideband (UWB) systems) must be used. This article reviews key aspects of parallel transmission systems as the only significant capacity scaling option going forward and discusses the various tradeoffs on an architectural level and a hardware integration level. In doing so, this article also serves as an introduction to the more detailed accounts of fiber-optic systems and their future scaling within this Special Issue of the Proceedings of the IEEE.
Space-division multiplexing (SDM) technology is a promising candidate to achieve massive parallelism in optical fiber cables and overcome the capacity limitation of the conventional single-mode fiber (SMF). Among the several kinds of SDM fiber, a weakly coupled multicore fiber (MCF) is advantageous in that it can be easily upgraded for use in existing equipment and requires no complex signal processing for optical multi-input multi-output (MIMO). In this article, we discuss the progress and standardization activity of MCF technologies from the viewpoint of accelerating the practical application of SDM technology. We first describe the possible application areas of SDM fibers and then show the recent progress of the essential technologies to construct the MCF link: the MCF itself, its splicing and connectorization, and the input/output techniques. We also discuss the availability and deployability of MCF as a large-capacity transmission medium and detail the progress on establishing a new international standard for SDM technology, which includes both historical progress and more recent endeavors on the standardization of optical fiber cables and SDM technology in International Telecommunication Union Telecommunication Standardization Sector (ITU-T) and International Electrotechnical Commission (IEC). We close with a summary of MCF technology and its standardization activity with an eye to next-generation transmission systems and the long-term development of ultralarge capacity SDM transmission technology.
We show the design and applicability of multi-core fiber (MCF) with the standard 125 μm cladding diameter to the telecommunication systems. It offers easier and practical use of the space-division multiplexing (SDM) technology given its excellent fiber productivity and utilization of existing standard technologies. We numerically and experimentally reveal that the simple step-index (SI) profile enables us to allocate four cores in the standard 125 μm cladding and to realize full compliance with G.657.A1 fiber. We then expand the design and concept of the standard cladding MCF and show the index profile and single-mode bandwidth offer control of XT characteristics. We elucidate the application scope of the standard cladding MCF for not only the full-band (O-L band) application to short-reach and terrestrial transmission consistent with ITU-T Recommendations G.652 and G.657, but also ultra-long haul transmission, such as submarine systems compliant with ITU-T Recommendation G.654.
24 January 2018 in Journal of Lightwave Technology
We propose the optimum design of high spatial density few-mode multicore fiber (MCF) for repeated space-division multiplexed (SDM) transmission. Numerical analyses reveal that a hexagonally arranged six-mode seven-core structure is potentially better than the other possibility, the six-mode multicore structure, in terms of realizing high spatial density and low mode-dependent loss (MDL) characteristics at the splice point; its benefits will enable us to construct long-haul dense SDM transmission links. We fabricate a 171 μm cladding six-mode seven-core fiber and successfully demonstrate low loss, differential mode delay (DMD), crosstalk, and splice-induced MDL characteristics while maintaining the relative core multiplicity factor of more than 50. Finally, we demonstrate repeated optical 12 × 12 MIMO transmission of more than 100 km using our six-mode MCF and erbium doped fiber amplifier (EDFA).
22 October 2018 in Journal of Lightwave Technology
We demonstrate differential mode delay (DMD)- unmanaged 2500-km 12-core × 3-mode multicore fewmode fiber (MC-FMF) and 6300-km 3-mode FMF transmission. Mode division multiplexed signals exhibit different transmission behavior depending on excited spatial modes in the presence of moderelevant physical phenomena including DMD and mode dependent loss (MDL). In weakly-coupled FMF transmission over long distance where overall DMD and MDL grow almost linearly with fiber length, these phenomena restrict achievable information capacity and/or transmission reach. This paper presents a newlydeveloped transmission scheme and a multiple-input multipleoutput (MIMO) signal processing technique that are designed for achieving long-haul FMF transmission. Permutating spatial channels cyclically at each span induced quasi-strongly coupled transmission regime and hence significantly suppressed DMDinduced pulse broadening. Layered MIMO signal processing comprising multiple stages performing successive signal detection and intermodal interference canceling mitigated MDL impact with more than 2-dB Q-factor improvement. The combined use of these techniques enabled us to achieve the first-ever transoceanicclass long-haul FMF transmission.
This paper numerically describes the design of double-cladding photonic-crystal fiber (DC-PCF) for ultrabroadband compensation over all telecommunication bands (O to L), i.e., ranging from 1260 to 1625 nm. We show that an ultrabroadband compensating DC-PCF can be designed simply by considering the zero-dispersion wavelength and the relative dispersion to the slope at a particular wavelength of a conventional single-mode fiber (SMF). As a result, we reveal that the proposed DC-PCF can successfully compensate for the dispersion of a conventional SMF with an effective dispersion range of plusmn0.4 ps/nmmiddotkm over all telecommunication bands as well as provide an effective area comparable to that of conventional dispersion-compensating fiber