Human walking intention estimation is a critical step for the active assistance control of lower limb exoskeleton, because the purpose of active assistance control is human motion assistance rather than human motion tracking. Complying with human walking intention is the basic requirement of human walking assistance. Hence, the human walking intention must be estimated first to ensure exoskeleton will not impede human motion. Actually, estimating human walking intention is to estimate human joint torque during walking. In order to estimate a smooth personalized human joint torque profile, an online learning and prediction algorithm of human joint trajectory and joint torque is proposed in this paper. The algorithm is based on dynamical movement primitives model which is used for online learning and predicting human joint trajectory which is substituted into the human dynamics model to estimate the human joint torque. The results of human walking experiments demonstrate that the proposed algorithm can not only predict a smooth human joint trajectory and joint torque profile in real time, but also compensate the phase delay caused by sensor signal filtering. Hence, the proposed algorithm is suitable for the active walking assistance control of exoskeleton.
Exoskeleton robots demonstrate promise in their application in assisting or enhancing human physical capacity. Joint muscular torques (JMT) reflect human effort, which can be applied on an exoskeleton robot to realize an active power-assist function. The estimation of human JMT with a wearable exoskeleton is challenging. This paper proposed a novel human lower limb JMT estimation method based on the inverse dynamics of the human body. The method has two main parts: the inverse dynamic approach (IDA) and the sensing system. We solve the inverse dynamics of each human leg separately to shorten the serial chain and reduce computational complexity, and divide the JMT into the mass-induced one and the foot-contact-force (FCF)-induced one to avoid switching the dynamic equation due to different contact states of the feet. An exoskeleton embedded sensing system is designed to obtain the user’s motion data and FCF required by the IDA by mapping motion information from the exoskeleton to the human body. Compared with the popular electromyography (EMG) and wearable sensor based solutions, electrodes, sensors, and complex wiring on the human body are eliminated to improve wearing convenience. A comparison experiment shows that this method produces close output to a motion analysis system with different subjects in different motion.
A novel balance assistance control strategy of a hip exoskeleton robot was proposed in this paper. The organic fusion of the human balance assessment and the exoskeleton balance assistance control strategy are the assurance of balance recovery. However, currently there are few human balance assessment methods that are suitable for detecting balance loss during standing and walking, and very little research has focused on exoskeleton balance recovery control. In this paper, a single step balance assessment method was proposed first, and then based on this method an "assist-as-needed" balance assistance control strategy was established. Finally, the exoskeleton balance assistance control experiment was carried out. The experiment results verified the effectiveness of the single balance assessment method and the active balance assistance control strategy.
The lower extremity exoskeleton is a device for auxiliary assistance of human movement. The interaction performance between the exoskeleton and the human is determined by the lower extremity exoskeleton’s controller. The performance of the controller is affected by the accuracy of the dynamic equation. Therefore, it is necessary to study the dynamic parameter identification of lower extremity exoskeleton. The existing dynamic parameter identification algorithms for lower extremity exoskeletons are generally based on Least Square (LS). There are some internal drawbacks, such as complicated experimental processes and low identification accuracy. A dynamic parameter identification algorithm based on Particle Swarm Optimization (PSO) with search space defined by Recursive Least Square (RLS) is developed in this investigation. The developed algorithm is named RLS-PSO. By defining the search space of PSO, RLS-PSO not only avoids the convergence of identified parameters to the local minima, but also improves the identification accuracy of exoskeleton dynamic parameters. Under the same experimental conditions, the identification accuracy of RLS-PSO, PSO and LS was quantitatively compared and analyzed. The results demonstrated that the identification accuracy of RLS-PSO is higher than that of LS and PSO.
2 September 2024 in IEEE Journal of Biomedical and Health Informatics
Adding supernumerary robotic limbs (SRLs) to humans and controlling them directly through the brain are main goals for movement augmentation. However, it remains uncertain whether neural patterns different from the traditional inherent limbs motor imagery (MI) can be extracted, which is essential for high-dimensional control of external devices. In this work, we established a MI neo-framework consisting of novel supernumerary robotic sixth-finger MI (SRF-MI) and traditional right-hand MI (RH-MI) paradigms and validated the distinctness of EEG response patterns between two MI tasks for the first time. Twenty-four subjects were recruited for this experiment involving three mental tasks. Event-related spectral perturbation was adopted to supply details about event-related desynchronization (ERD). Activation region, intensity and response time (RT) of ERD were compared between SRF-MI and RH-MI tasks. Three classical classification algorithms were utilized to verify the separability between different mental tasks. And genetic algorithm aims to select optimal combination of channels for neo-framework. A bilateral sensorimotor and prefrontal modulation was found during the SRF-MI task, whereas in RH-MI only contralateral sensorimotor modulation was exhibited. The novel SRF-MI paradigm enhanced ERD intensity by a maximum of 117% in prefrontal area and 188% in the ipsilateral somatosensory-association cortex. And, a global decrease of RT was exhibited during SRF-MI tasks compared to RH-MI. Classification results indicate well separable performance among different mental tasks (88.1% maximum for 2-class and 88.2% maximum for 3-class). This work demonstrated the difference between the SRF-MI and RH-MI paradigms, widening the control bandwidth of the BCI system.
Purpose: This paper aims to propose a novel balance-assistive control strategy for hip exoskeleton robot.Design/methodology/approach: A hierarchical balance assistive controller based on the virtual stiffness model of extrapolated center of mass (XCoM) is proposed and tested by exoskeleton balance assistive control experiments.Findings: Experiment results show that the proposed controller can accelerate the swing foot chasing XCoM and enlarge the margin of stability.Originality/value: As a proof of concept, this paper shows the potential for exoskeleton to actively assist human regain balance in sagittal plane when human suffers from a forward or backward disturbing force.