Inkjet printing technique allows manufacturing low cost organic light emitting diodes (OLEDs) in ambient conditions. The above approach enables upscaling of the OLEDs fabrication process which, as a result, would become faster than conventionally used vacuum based processing techniques. In this work, we use the inkjet printing technique to investigate the formation of thin active layers of well-known light emitting polymer material: Super Yellow (poly(para-phenylene vinylene) copolymer). We develop the formulation of Super Yellow ink, containing non-chlorinated solvents and allowing stable jetting. Optimization of ink composition and printing resolution were performed, until good quality films suitable for OLEDs were obtained. Fabricated OLEDs have shown a remarkable characteristics of performance, similar to the OLEDs fabricated by means of spin coating technique. We checked that, the values of mobility of the charge carriers in the printed films, measured by transient electroluminescence, are similar to the values of mobility measured in spin coated films. Our contribution provides a complete framework for inkjet printing of high quality Super Yellow films for OLEDs. The description of this method can be used to obtain efficient printed OLEDs both in academic and in industrial settings.
10 October 2017 in IEEE Transactions on Electron Devices
A 2-D device model of the organic electrochemical transistor is described and validated. Devices with channel length in range 100 nm–10 mm and channel thickness in range 50 nm– $\textsf {5}\mu \text{m}$ are modeled. Steady-state, transient, and AC simulations are presented. Using the realistic values of physical parameters, the results are in good agreement with the experiments. The scaling of transconductance, bulk capacitance, and transient responses with device dimensions is well reproduced. The model reveals the important role of the electrical double layers in the channel, and the limitations of device scaling.
Application of the master equation approach to the space-charge-limited transient situation is considered. The transient responses of thin organic films are simulated by solving the master equation of transport coupled with the Poisson equation. Hopping of the charge carriers between sites is described by the Miller-Abrahams formula. Sites with the Gaussian energetic distribution are localized on a Cartesian lattice. The solutions are calculated using the fully coupled Newton-Raphson method. The details of implementation permitting efficient stationary and transient simulation of unipolar transport are given. This approach gives much better agreement to the experimentally observed space-charge-limited current transient responses than the widely used drift-diffusion model. It is shown that the time position of the transient peak is affected by the contact barrier height. In the case of thin strongly disordered samples, the best observability of the peak is predicted for the intermediate values of the contact barrier.
Space-charge-limited current transients (also referred as time resolved dark injection) is an attractive technique for mobility measurements in low mobility materials, particularly the organic semiconductors. Transients are generally analyzed in terms of the Many-Rakavy theory, which is an approximate analytical solution of the time-dependent drift-diffusion problem after application of a voltage step. In this contribution, we perform full time-dependent drift-diffusion simulation and compare simulated and experimental transients measured on a sample of triaryl-amine based electroactive dendrimer (experimental conditions: $\mu${}$\approx${}10$-${}5 cm2/(Vs), L=300~nm, E<105 V/cm). We have found that the Many-Rakavy theory is indeed valid for estimating the mobility value, but it fails to predict quantitatively the time-dependent current response. In order to obtain a good agreement in between simulation and experiment, trapping and quasi-ohmic contact models were needed to be taken into account. In the case of the studied electroactive dendrimer, the experimental results were apparently consistent with the constant mobility Many-Rakavy theory, but with this model, a large uncertainty of 20% was found for the mobility value. We show that this uncertainty can be significantly reduced to 10% if a field-dependent mobility is taken into account in the framework of the extended Gaussian disorder model. Finally, we demonstrate that this fitting procedure between simulated and experimental transient responses also permits to unambiguously provide the values of the contact barrier, the trap concentration, the trap depth in addition to that of the mobility of carriers.