Lin Meng

Lin Meng

Auto-generated profile, based on publicly available information

Lin Meng

University of Electronic Science and Technology of China

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 October 2023 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
Lei SiLei Si
Lei Si
JLJiahao Li
Jiahao Li
ZWZhongbin Wang
Zhongbin Wang
DWDong Wei
Dong Wei
JGJinheng Gu
Jinheng Gu
LMLin Meng
Lin Meng
Accurate and rapid recognition of coal and gangue is an important prerequisite for safe and efficient mining in top coal caving face. In this paper, a novel coal-gangue recognition method is put forward based on improved ant-lion optimization algorithm (IALO), variational modal decomposition (VMD) and improved MobileNetV2 network. Firstly, two strategies of trap boundary adjustment and chaotic mapping are designed for ALO to sufficiently explore the solution space and prevent falling into local optimization. Subsequently, IALO is employed to search the optimal parameters of VMD and the superiority of IALO-VMD can be reasonably embodied through some simulation analysis. Then, the vibration signal-image mapping is performed to produce rich sample data for MobileNetV2. The coordinate attention mechanism and Inception structure are combined with MobileNetV2 to accelerate the training speed and improve the classification accuracy, and the improved MobileNetV2 based classifier is constructed to fulfill an automatic coal-gangue recognition. Finally, an experimental platform of coal-gangue impacting the tail beam of hydraulic support is built and many comparison experiments are carried out. The experiment results indicate that the proposed coal-gangue recognition method has the prediction accuracy of 99.66%, which is increased by 1.43% compared to the classical MobileNetV2. The underground on-site testing results show that the average prediction accuracy of the proposed coal-gangue recognition model can exceed 93%, and can effectively and accurately distinguish different top coal caving states.

8 September 2021 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
CXChe Xu
Che Xu
LMLin Meng
Lin Meng
CPClaudio Paoloni
Claudio Paoloni
YQYu Qin
Yu Qin
LBLiangjie Bi
Liangjie Bi
YYYong Yin
Yong Yin
An improved topology of Extended interaction oscillators (EIO) is presented with enhanced efficiency at 0.35 THz. A bi-periodic ladder-type structure is used for optimizing the performance of the TM $_{{31}}- 2\pi $ mode operation, based on bi-periodic interaction gaps composed of staggered short and long slots. The bi-periodic interaction mechanism permits to operate the circuit with a standing-wave field between the $\pi $ and $2\pi $ modes, thus providing the potential to combine the advantages of both $\pi $ and $2\pi $ modes in terms of both coupling and output performance. The resulting transverse TM 31 operating mechanism exhibits a good agreement with the bi-periodic structure in terms of coupling performance, with the short slot length positively correlated with the value of effective characteristic impedance ${M}^{\,{2}}{R}/{Q}$ . The circuit demonstrates attractive coupling and output characteristics by optimization of ${M}^{\,{2}}{R}/{Q}$ and ${Q}_{e}$ . A state-of-the-art value ${M}^{\,{2}}{R}/{Q}$ of 59.69 $\Omega $ and a moderate ${Q}_{e}$ of 2523.52 are achieved for a proposed eight-period ladder-type EIO. An RF power of 540 W is obtained with a 42.5 kV, 0.6 A sheet beam, with 2.1% electronic efficiency at 0.35 THz.

2 December 2018 in Applied Sciences
Verified
Journal Article
Open access
PDF file
QCQingyun Chen
Qingyun Chen
XYXuesong Yuan
Xuesong Yuan
Matthew ColeMatthew Cole
Matthew Cole
YZYu Zhang
Yu Zhang
LMLin Meng
Lin Meng
YYYang Yan
Yang Yan
The carbon nanotube (CNT) cold cathode is an attractive choice for millimeter and terahertz vacuum electronic devices owning to its unique instant switch-on and high emission current density. A novel, dual-gridded, field emission architecture based on a CNT cold cathode is proposed here. CNTs are synthesized directly on the cathode surface. The first separating grid is attached to the CNT cathode surface to shape the CNT cathode array. The second separating grid is responsible for controlled extraction of electrons from the CNT emitters. The cathode surface electric field distribution has been improved drastically compared to conventional planar devices. Furthermore, a high-compression-ratio, dual-gridded, CNT-based electron gun has been designed to further increase the current density, and a 21 kV/50 mA electron beam has been obtained with beam transparency of nearly 100%, along with a compression ratio of 39. A 0.22 THz disk-loaded waveguide backward wave oscillator (BWO) based on this electron gun architecture has been realized theoretically with output power of 32 W. The results indicate that higher output power and higher frequency terahertz BWOs can be made using advanced, nanomaterial-based cold cathodes.

5 February 2025 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
WLWenlong Li
Wenlong Li
HLHailong Li
Hailong Li
YQYu Qin
Yu Qin
WHWanshan Hou
Wanshan Hou
LMLingze Meng
Lingze Meng
LMLin Meng
Lin Meng
To meet the phase control requirements of magnetrons in large-scale array applications, the advantages of injection locking and cascaded mutual coupling phase locking are fully integrated. A hybrid phase-locking system for magnetrons is proposed. By performing external injection on just one magnetron within the cascaded mutual coupling structure, simultaneous frequency locking of both magnetrons can be achieved. Simulation and experimental results indicate that two phase-locking regions emerge during one period of phase variation. By quantifying the power flow across the four ports of the phase locker, it is determined that the power necessary for phase locking is less than 1% of the total output power. External frequency tuning enables the stabilization of the frequencies of both magnetrons, resulting in a purer spectrum. With an injection ratio of -18.97 dB, the mutual coupling phase locker can be adjusted to vary the phase difference between the output signals of the two magnetrons within the range from -126∘ to 171∘. This facilitates phase control of the output signals from the two magnetrons. The phase-locking efficiency of this system is 88.2%. The hybrid phase-locking approach achieves high-efficiency phase locking and power output. This approach is particularly suited for coherent power synthesis and phase scanning in large-scale array applications.

16 July 2025 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
WHWanshan Hou
Wanshan Hou
HLHailong Li
Hailong Li
WLWenlong Li
Wenlong Li
YQYu Qin
Yu Qin
HLHaixia Liu
Haixia Liu
YYYong Yin
Yong Yin
This article proposes a magnetron array phase-locking circuit based on peer-to-peer (P2P) locking. The circuit is composed of cascaded coaxial lines and newly designed couplers. By adjusting the cascade topology between the coaxial lines and couplers, discrete phase-difference transitions near 0° and 180° can be achieved between adjacent magnetrons, enabling multiple phase-difference distributions in the magnetron phase-locked array, without using phase shifters or other precise phase control circuits. A phase-difference prediction method based on a theoretical model of coupling coefficients is developed and validated using a vector network analyzer (VNA) and high-power experiments. Considering that the three-magnetron array is the basic unit of large-scale arrays, this article focuses on the three-magnetron array and constructs and tests four types of phase-locking circuits under different cascade topologies. The experimental results show that at 2.466 GHz, the magnetron array achieves stable phase locking with four distinct phase-difference distributions and phase-locking efficiency up to 90%. Notably, for an array composed of N magnetrons, up to $2^{N-1}$ discrete phase-difference distributions can theoretically be achieved, demonstrating excellent phase control flexibility.

20 September 2021 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
LBLiangjie Bi
Liangjie Bi
YQYu Qin
Yu Qin
CXChe Xu
Che Xu
RPRuibin Peng
Ruibin Peng
LMLin Meng
Lin Meng
YYYong Yin
Yong Yin
An effective overmoded circuit is proposed to support efficient interaction with two beams for the development of high power extended interaction oscillators (EIOs) toward sub-terahertz (THz) and higher frequency. The circuit design focuses on the effect of the frequency-determining parameter on mode characteristics of the $\mathrm{TM}_{{1} {n}}$ sequence. Frequency equivalence between $\mathrm{TM}_{{1} {n}}$ modes with different ${n}$ supports the mode selection for two-beam interaction. Accordingly, the TM 13 mode is selected to duplicate the dispersion relation around the axial mode of $2\pi $ and ohmic loss of conventional TM 11 mode used in conventional single-beam circuits. On this basis, the overmoded circuit is formed with two beams based on the TM 13 mode. In order to verify its effectiveness, a 0.22-THz EIO is designed with the overmoded circuit and, most importantly, the effect of the uniformity of two beams on the EIO performance is simulated. When the current of one beam is assumed to be constant and that of another beam is increased, the power is increased linearly and then tends to be saturation. This shows good capability of the EIO in interacting with nonuniform two beams, which is critical for its stable operation. Simulation results have shown the achievement of the average power of 0.22-THz wave over 1.26 kW with double beams at 23 kV and each current of 0.2 A.