13 December 2023 in IEEE/ASME Transactions on Mechatronics
Enhancing the operational capabilities within a limited workspace for the assembly of microobjects with different shapes and dimensions is a prominent objective in microgripper development. In response to the challenge, this article develops a novel microgripper equipped with replaceable modular tools. The design process involves an integrated topology optimization method for compliant mechanisms and piezoelectric actuators to achieve high compactness. This method employs a geometric representation scheme incorporating explicit and implicit topology descriptions to drive the layout evolution of actuators and compliant mechanisms. The extended finite element method (XFEM) is utilized to capture the displacement field in the design domain to enhance the accuracy of the structural response and sensitivity analysis. Moreover, the output compliance and minimum length scale control are considered in the optimization model to ensure the manufacturability of the results. Furthermore, the microgripper is equipped with replaceable modular tools, enabling an expanded clamping range and adaptability to microobjects of varying shapes and feature dimensions. Numerical simulations and experiments validate the efficacy of the design method and demonstrate the high area efficiency and application potential of the proposed microgripper. Notably, the microgripper has proven successful in clamping objects with feature dimensions ranging from 25 $\mu$ m to 3.8 mm and assembling micro silicon wafers and miniature planetary gears.
2 March 2021 in IEEE/ASME Transactions on Mechatronics
Lightly damping linear dynamic characteristics of a flexure-based stage mainly limit control bandwidth when its piezo-actuating hysteresis is well compensated. In this article, a novel damped decoupled XY nanopositioning stage embedding graded local resonators (GLRs) is developed and optimized based on the maximization of motion range and first-order natural frequency. The modal damping strengthening mechanism of local resonant metastructures is analyzed based on the built dynamic model. The GLRs embedded in the working platform has different dynamic parameters, which are optimized based on $H_2$ norm. The motion decoupling is guaranteed by the designed hybrid flexure-guided mechanism while strengthening the Z-direction supporting stiffness. The static/ scanning-frequency dynamic experiment and trajectory tracking control with a propotional-integral-derivative (PID) controller is implemented. The experimental results indicate that maximum motion crosstalk is 0.69%, and validate the effectiveness of improving the linear dynamics of the stage and expanding control bandwidth.
24 June 2025 in Journal of Vibration and Control
Considering the limited modal damping performance and reduced robustness of conventional linear dampers, such as multiple tuned mass dampers (MTMDs) employed in piezo-driven nanopositioning stages, this paper proposes a lightweight elastic vibro-impact nonlinear energy sink (EVI). The dynamic model of EVI is established, and its modal damping enhancement mechanism is analyzed using the Runge-Kutta method. A comprehensive numerical simulation is conducted to compare the performance of EVI with that of an equivalent tuned mass damper (ETMD). Furthermore, experimental investigations are performed by integrating the EVI into piezo-driven nanopositioning stages. Both numerical analysis and experimental results demonstrate that the EVI can effectively enhance modal damping and rapidly dissipate vibration energy. Notable improvements include a 72.87% reduction in the resonant peak of the amplitude–frequency response and a 68.72% decrease in square-wave response time compared to the ETMD under EVI conditions. These findings provide a pioneering perspective for improving the control bandwidth of piezo-driven nanopositioning stages.