The thermal masses of components influence the performance of many adsorption heat pump systems. However, typically when experimental adsorption systems are reported, data on thermal mass are missing or incomplete. This work provides original measurements of the thermal masses for experimental sorption heat exchanger hardware. Much of this hardware was previously reported in the literature, but without detailed thermal mass data. The data reported in this work are the first values reported in the literature to thoroughly account for all thermal masses, including heat transfer fluid. The impact of thermal mass on system performance is also discussed, with detailed calculation left for future work. The degree to which heat transfer fluid contributes to overall effective thermal mass is also discussed, with detailed calculation left for future work. This work provides a framework for future reporting of experimental thermal masses. The utilization of this framework will enrich the data available for model validation and provide a more thorough accounting of adsorption heat pumps.
1 March 2019 in International Journal of Refrigeration
Currently the use of solar energy for heating and cooling isn’t widespread. In order to reduce primary energy consumption in the built environment along with improving the thermal performance of the current building stock, retrofit solutions are required to utilise renewable energy. Using solar energy to reduce primary energy consumption is seen as a possible solution. With the precipitous fall in the prices of crystalline solar photovoltaic modules, utilising this technology to reduce electrical energy consumption for cooling is an attractive solution. Recently, a sorption module integrated collector has been developed in order to improve cost-effectiveness and simplify solar thermal heating and cooling systems. A techno-economic analysis has been performed to evaluate solar photovoltaic cooling and solar thermal cooling systems for residential renewable energy retrofit. The analysis is based on potential energy and cost savings according to simulated heating and cooling loads under climatic conditions of Madrid, Spain. Simplified models were used to determine heating and cooling demands and the solar energy contribution to heating and cooling loads. Additionally, given the sorption collector's unique capacity to store solar energy thermally and provide cooling at night an analysis has been carried out to identify the combined benefit of solar-assisted heating and cooling via photovoltaics during the day and solar sorption at night. For system sizes between 5m2 and 20m2 solar fractions between 16% and 64% could be achieved which translated to annual energy cost savings between €153 to €615
3 April 2015 in Science and Technology for the Built Environment
Given the environmental benefits of utilizing free thermal energy sources, such as waste heat and solar energy for cooling purposes, many developments have come about in thermally driven cooling. However, there are still some barriers to the general commercialization and market penetration of such technologies that are associated with system and installation costs, complexity, and maintenance. In efforts to overcome these limitations, a novel absorption heat pump module has been developed and tested. The module comprises a fully encapsulated sorption tube containing hygroscopic salt sorbent and water as a refrigerant, sealed under vacuum, and within which there are no moving parts. The absorption module consists of two main components, one that alternately functions as an absorber or generator and other that alternates between the roles of evaporator and condenser. The module therefore operates cyclically between a cooling delivery phase and a regeneration phase. Each module has a significant energy storage capacity with cooling delivery phases ranging from 6–10 h in length with temperature lifts between 16°C and 25°C. The modules are optimized for integration directly into a solar thermal collector, for roof or façade installation, for daytime regeneration and night-time cooling delivery. Collector integrated modules would be completely modular maintenance-free absorption heat pumps with similar installation requirements to standard solar thermal collectors. This article describes the test method and performance characteristics of the individual absorption modules.