29 May 2018 in International Journal of Concrete Structures and Materials
The article handles potential approaches to design and determination of total load capacity of foundation slabs and floors. The research is focused on punching shear failure of reinforced ground...
1 January 2015 in Procedia Engineering
Concrete is frequently used when designing the civil engineering structures. It is, in particular, used for elements of the load-carrying systems. High strength concrete, fibres in concrete or recycled materials are employed as advanced solutions. It is necessary to identify the material properties of new materials and composites with respect to the future use. This is, particularly, the case of non-linear analyses which are performed in designs and analyses. This paper focuses on evaluation and modelling of three point flexural test of fibre concrete beams. The purpose is to evaluate the basic properties which will be used for constitutive models in the non-linear analyses. It is assumed that the constitutive models of concrete are based on the fracture-plastic theory. The modelling and analyses are performed in ATENA - the software application which is based on the Finite Element Method
14 June 2017 in Key Engineering Materials
The aim of the paper is a nonlinear analysis of concrete structures. For these type of tasks is an important suitable choice of model input parameters and concrete. Especially if the analysis is preceding the results of an experiment, which can determine the exact properties of concrete. The following properties of concrete are needed for nonlinear analysis: tensile strength and compressive strength of concrete. There are more procedures how to determine some unknown input parameters. The paper presents some approaches to calculating and selecting parameters, which are based primarily on the recommendations of the Model Code and professional articles. Specifically, the numerical analysis performed in our developed program which allows observing a nonlinear behaviour of concrete at loading case.
1 September 2015 in Key Engineering Materials
The goal of the paper is to model and evaluate the total load capacity of the reinforced concrete beams. A non-linear analysis and finite element method were used for that purpose. The model consists of 3D finite elements. The constitutive model of concrete for the non-linear analysis is based on a fracture-plastic theory. The input parameters are the data obtained in previous tests which included both standard tests and additional tests of the testing bodies. There is no shear reinforcement in the beams. The non-linear calculations were carried out for several variants. The study takes into considerations the influence of concrete properties as well as the size of the finite elements.
24 June 2014 in Advanced Materials Research
The purpose of this paper is to compare calculation of internal forces and deformations of slabs for two calculation methods: the finite element method and the finite difference method. Two concrete slabs have been analysed. In the case of the finite element method, different element mesh are used, providing, thus, solutions in different variants. The calculation and algorithms is based on a thin slab theory. Variants calculate in program Scia Engineer effects of shearing forces by means of the Midlins theory or thin slab theory. Algorithms for the calculation were developed in Matlab.
14 June 2017 in Key Engineering Materials
Foundation structures are usually exposed to dominant vertical load. However, in some cases there is also significant value of horizontal load caused e.g. by horizontal terrain deformation on areas attached with underground mining or by horizontal deformation of foundation structure due to pre-stressing, creep, shrinkage, and temperature variation. Through the friction between subsoil and foundations, the foundation structure must resist significant normal forces. The idea of sliding joints between subsoil and foundation structure, which eliminates the friction in footing bottom, comes from the 1970’s. The bitumen asphalt belt given rheological properties has been proven as an effective material for sliding joints. In the paper there are test results of shear resistance of currently used asphalt belts. The test results are used for subsoil shear stress analysis in model example of strip foundation. Shear resistance is calculated according to Czech code for designing buildings on undermined area and also using advanced FEM analysis.