5 November 2024 in IEEE Open Journal of the Communications Society
A Reconfigurable Intelligent Surface (RIS) consists of many small reflective elements whose reflection properties can be adjusted to change the wireless propagation environment. Envisioned implementations require that each RIS element be connected to a controller, and as the number of RIS elements on a surface may be on the order of hundreds or more, the number of required electrical connectors creates a difficult wiring problem. A potential solution to this problem was previously proposed by the authors in which “biasing transmission lines” carrying standing waves are sampled at each RIS location to produce the desired bias voltage for each RIS element. This paper presents models for the RIS elements that account for mutual coupling and realistic varactor characteristics, as well as circuit models for sampling the transmission line to generate the RIS control signals. The paper investigates two techniques for conversion of the transmission line standing wave voltage to the varactor bias voltage, namely an envelope detector and a sample-and-hold circuit. The paper also develops a modal decomposition approach for generating standing waves that are able to generate beams and nulls in the resulting RIS radiation pattern that maximize either the Signal-to-Noise Ratio (SNR) or the Signal-to-Leakage-plus-Noise Ratio (SLNR). The paper provides five algorithms, two for the case of the envelope detector, one for the sample-and-hold circuit, one for pursuing the global minimum for both circuits, and one for simultaneous beam and null steering. Extensive simulation results show that while the envelope detector is simpler to implement, the sample-and-hold circuit has substantially better performance and runs in substantially less time. In addition, the wave-controlled RIS is able to generate strong beams and deep nulls in desired directions. This is in contrast with the case of arbitrary control of each varactor element and idealized RIS models.
25 August 2026 in Physical Review Applied
A coupled-oscillator system displays enhanced sensitivity of its saturated steady-state (SS) oscillation frequency to small parameter perturbations near an exceptional-point degeneracy (EPD), a property that can be used to realize EPD-based sensors. Linear $\mathcal{P}\mathcal{T}$-symmetric systems, consisting of two coupled resonators, exhibit EPDs around which square-root sensitivity is observed. However, linear models are insufficient for realistic systems that rely on nonlinear, saturable-gain elements, particularly when $\mathcal{P}\mathcal{T}$-symmetry is broken. Thus, we study the SS of a general system of two coupled oscillators featuring EPDs and saturable nonlinear gain, using coupled-mode theory. We do this by synthesizing and extending prior SS analyses of the system's stability and its square-root and cubic-root oscillation frequency sensitivity at a unique third-order SS-EPD. We add an SS analysis of saturated gain, energy, and oscillation-frequency sensitivity in the vicinity of the third-order SS-EPD, enabling characterization of the various SS regimes. We determine that the stable and bistable regions in parameter space directly depend on the saturated-gain values; that the dynamic range of high sensitivity around degenerate conditions is extended by increasing losses, consequently reducing the system's stored energy; and that, to exploit the cubic-root-like sensitivity associated with the third-order SS-EPD, the suggested working regime is best confined to operation within the weakly coupled regime and not exactly at the third-order SS-EPD. Finally, we apply the model to two electronic circuits that exhibit cubic-root sensitivity, demonstrating the application and limitations of this analysis.
1 January 2026 in IEEE Transactions on Antennas and Propagation