Shajjad Chowdhury

Shajjad Chowdhury

Auto-generated profile, based on publicly available information

Shajjad Chowdhury

Oak Ridge National Laboratory, Knoxville, TN, USA

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 January 2021 in Proceedings of the IEEE
Verified
Journal Article
Closed access
IHIqbal Husain
Iqbal Husain
BOBurak Ozpineci
Burak Ozpineci
SISariful Islam
Sariful Islam
EGEmre Gurpinar
Emre Gurpinar
GSGui-Jia Su
Gui-Jia Su
RSRaj Sahu
Raj Sahu
The transition to electric road transport technologies requires electric traction drive systems to offer improved performances and capabilities, such as fuel efficiency (in terms of MPGe, i.e., miles per gallon of gasoline-equivalent), extended range, and fast-charging options. The enhanced electrification and transformed mobility are translating to a demand for higher power and more efficient electric traction drive systems that lead to better fuel economy for a given battery charge. To accelerate the mass-market adoption of electrified transportation, the U.S. Department of Energy (DOE), in collaboration with the automotive industry, has announced the technical targets for light-duty electric vehicles (EVs) for 2025. This article discusses the electric drive technology trends for passenger electric and hybrid EVs with commercially available solutions in terms of materials, electric machine and inverter designs, maximum speed, component cooling, power density, and performance. The emerging materials and technologies for power electronics and electric motors are presented, identifying the challenges and opportunities for even more aggressive designs to meet the need for next-generation EVs. Some innovative drive and motor designs with the potential to meet the DOE 2025 targets are also discussed.

2 May 2016 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
SCShajjad Chowdhury
Shajjad Chowdhury
Patrick WheelerPatrick Wheeler
Patrick Wheeler
CPChintan Patel
Chintan Patel
CGChristopher Gerada
Christopher Gerada
This paper presents a three-phase open-end winding induction motor drive. The drive consists of a three-phase induction machine with open stator phase windings and dual-bridge inverter supplied from a single dc voltage source. To achieve multilevel output voltage waveforms, a floating capacitor bank is used for the second of the dual bridges. The capacitor voltage is regulated using redundant switching states at half of the main dc-link voltage. This particular voltage ratio (2:1) is used to create a multilevel output voltage waveform with three levels. A modified modulation scheme is used to improve the waveform quality of this dual inverter. This paper also compares the losses in the dual-inverter system in contrast with a single-sided three-level neutral point clamped converter. Finally, detailed simulation and experimental results are presented for the motor drive operating as an open-loop v /f controlled motor drive and as a closed-loop field-oriented motor controller.

10 January 2022 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Open access
SCShajjad Chowdhury
Shajjad Chowdhury
EGEmre Gurpinar
Emre Gurpinar
BOBurak Ozpineci
Burak Ozpineci
DC-bus capacitors take up substantial space in an electric vehicle (EV) traction inverter, limiting the traction drive’s volumetric power density. Film capacitors are typically used, but other capacitor technologies with higher energy densities can help reduce the overall size. In this article, several commercial capacitor technologies are considered for use as dc-bus capacitors for EV traction inverters. They are characterized, evaluated, and compared for optimized design for volume reduction. This article also proposes a novel capacitor packaging technique that utilizes symmetrically distant parallel capacitor branches from termination, which improves electrical and thermal performance compared to a traditional flat-printed circuit board-based design. The proposed design was prototyped for a 100-kW traction inverter, and then, the thermal and electrical characteristics were evaluated under various operating conditions. Results show that the proposed symmetrical design has 40% lower layout inductance and 80% lower temperature difference than a traditional package among the parallel capacitor branches.

16 June 2020 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
EGEmre Gurpinar
Emre Gurpinar
SCShajjad Chowdhury
Shajjad Chowdhury
BOBurak Ozpineci
Burak Ozpineci
WFWei Fan
Wei Fan
Emerging wide-bandgap (WBG) semiconductor devices such as silicon carbide (SiC) metal-oxide semiconductor field-effect transistors (MOSFETs) and gallium nitride high-electron-mobility transistors can handle high power in reduced semiconductor areas better than conventional Si-based devices owing to superior material properties. With increased power loss density in a WBG-based converter and reduced die size in power modules, thermal management of power devices must be optimized for high performance. This article presents a graphite-embedded insulated metal substrate (thermally-annealed-pyrolytic-graphite-embedded insulated metal substrate-IMSwTPG) designed for WBG power modules. Theoretical thermal performance analysis of graphite-embedded metal cores is presented, with design details for IMSwTPG with embedded graphite to replace a direct-bonded copper (DBC) substrate. The proposed IMSwTPG is compared with an aluminum nitride-based DBC substrate using finite-element thermal analysis for steady-state and transient thermal performance. The solutions' thermal performances are compared under different coolant temperature and thermal loading conditions, and the proposed substrate's electrical performance is validated with static and dynamic characterization. Using graphite-embedded substrates, junction-to-case thermal resistance of SiC MOSFETs can be reduced up to 17%, and device current density can be increased by 10%, regardless of the thermal management strategy used to cool the substrate. Reduced transient thermal impedance of up to 40% of dies owing to increased heat capacity is validated in transient thermal simulations and experiments. The half-bridge power module's electrical performance is evaluated for on-state resistance, switching performance, and switching loss at three junction temperature conditions. The proposed substrate solution has minimal impact on conduction and switching performance of SiC MOSFETs.

9 May 2016 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
SCShajjad Chowdhury
Shajjad Chowdhury
Patrick WheelerPatrick Wheeler
Patrick Wheeler
CGChristopher Gerada
Christopher Gerada
CPChintan Patel
Chintan Patel
This paper presents a model predictive control technique applied to a dual-active bridge inverter where one of the bridges is floating. The proposed floating bridge topology eliminates the need for isolation transformer in a dual inverter system and therefore reduces the size, weight, and losses in the system. To achieve multilevel output voltage waveforms, the floating inverter dc-link capacitor is charged to the half of the main dc-link voltage. A finite-set model predictive control technique is used to control the load current of the converter as well as the floating capacitor voltage. Model predictive control does not require any switching sequence design or complex switching time calculations as used for space vector modulation; thus, the technique has some advantages in this application. A detailed analysis of the converter as well as the predictive control strategy is given in this paper. Simulation and experimental results to validate the approach are also presented.

8 October 2018 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
Zhen HuangZhen Huang
Zhen Huang
TYTao Yang
Tao Yang
PGPaolo Giangrande
Paolo Giangrande
SCShajjad Chowdhury
Shajjad Chowdhury
Michael GaleaMichael Galea
Michael Galea
Patrick WheelerPatrick Wheeler
Patrick Wheeler
This paper proposes a capacitor voltage regulation method for the dual converter with a floating bridge for aerospace applications. This topology has previously been reported, but with a constrained voltage utilisation factor due to the need for capacitor voltage regulations. In this paper, the effect of switching states on the voltage variation of capacitor is quantitatively modelled and an enhanced space vector modulation scheme with current feedback is proposed to achieve an active control of the floating capacitor voltages. This proposed method also allows further exploitation and utilisation of converter voltage. The relationship between the allowed modulation index of dual converter and load power factor is obtained and expressed using a fitted polynomial equation. The advantages of the proposed method include boosted voltage utilisation and superior performance in term of capacitor voltage balance. These advantages have been proven through simulation and experimental results on RL loads as well as with an open-end winding induction motor. The proposed modulation scheme can boost the converter voltage utilisation by at least 10% while achieving full four-level operation. More importantly, the higher available voltage allows extending the constant torque region of the motor, the further beginning of field weakening operation could be postponed.