16 October 2023 in Structural Control and Health Monitoring
Terrestrial laser scanning (TLS) technology has the advantages of wide range, high efficiency, and low cost in spatial information collection, so it is widely used in infrastructure monitoring and measurement. During TLS application, the registration and positioning of the point cloud have a direct impact on the quality of the data and the validity of the results. The linear distribution of the tunnel structure and the lack of significant features present challenges in the registration and positioning of 3D point clouds in railway tunnels. The commonly used registration methods are difficult to achieve high registration accuracy and are prone to propagation errors, which reduce the accuracy and effectiveness of results. To achieve accurate registration and positioning of multistation clouds in railway tunnels, we propose a coordinate-based global registration method. To determine the coordinates of scan points in the reference coordinate system and the direction of the reference coordinate system, a few fixed control points are used during the data collection stage. Consequently, each station cloud can be precisely positioned and automatically registered in the reference coordinate system without accumulating or propagating errors. In addition, the coordinate-based registration method eliminates the introduction of errors due to artificial target setting and feature point extraction, as well as the problem of accurately positioning the entire point cloud in the reference coordinate system, thereby enhancing the accuracy, efficiency, and automation levels of cloud registration. The experiment demonstrates that the coordinate-based global registration method is robust and applicable in complex scenes, and it is suitable for the accurate positioning and registration of multistation clouds in linear and curved railway tunnels. The coordinate-based registration method reduces the amount of error in the global registration link by 65% when compared to the point-based registration method, and the point cloud accuracy has reached fine registration, ensuring that fine-grained inverse modeling of the tunnel structure can be performed.
13 November 2014 in IEEE Access
Physical layer (PHY) security is recently regarded as a promising technique to improve the security performance of wireless communication networks. Current developments in PHY security are often based on the assumption of perfect channel state information (CSI). In this paper, both security and reliability performance for the downlink cloud radio access network with optimal remote radio heads (RRHs) node selection are investigated in a practical scenario by considering channel estimation (CE) errors. In particular, a three-phase transmission scheme is proposed and the linear minimum mean-square error (MMSE) estimation method is utilized to obtain the CSI. Based on the CSI estimates and the statistics of CE errors, the outage probability and intercept probability are derived in closed-form expression to evaluate the security and reliability performance, respectively. In addition, two possible cases (with or without intercepting signals from baseband unit) are considered for the eavesdropper. It is found that the suggested optimal RRHs selection scheme outperforms the nonselection scheme, and that the increasing number of RRHs can lower the outage probability as well as the intercept probability. It is also shown that there exists an optimal training number to minimize the sum of the outage probability and intercept probability. Finally, simulation results are provided to corroborate our proposed studies.
31 October 2013 in International Journal of Antennas and Propagation
The need for improving the safety and the efficiency of transportation systems has become of extreme importance. In this regard, the concept of vehicle-to-X (V2X) communication has been introduced with the purpose of providing wireless communication technology in vehicular networks. Not like the traditional views, the wide-sense V2X (WSV2X) communications in this paper are defined by including not only vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communications but also train-to-X (T2X) communications constituted of train-to-train (T2T) and train-to-infrastructure (T2I) communications. All the information related to the wide-sense V2X channels, such as the standardization, scenarios, characters, and modeling philosophies, is organized and summarized to form the comprehensive understanding of the development of the WSV2X channels.