Yuen Kwan Mo

Yuen Kwan Mo

Auto-generated profile, based on publicly available information

Yuen Kwan Mo

Warwick Manufacturing Group, University of Warwick, Coventry, U.K.

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 April 2023 in IEEE Transactions on Information Forensics and Security
Verified
Journal Article
Closed access
SDSon Dinh-Van
Son Dinh-Van
THTiep M. Hoang
Tiep M. Hoang
BCBerna Bulut Cebecioglu
Berna Bulut Cebecioglu
Daniel S. FowlerDaniel S. Fowler
Daniel S. Fowler
YMYuen Kwan Mo
Yuen Kwan Mo
MHMatthew Higgins
Matthew Higgins
Millimeter-wave (mmWave) carriers are an essential building block of fifth-generation (5G) systems. Satisfactory performance of the communications over the mmWave spectrum requires an alignment between the signal beam of the transmitter and receiver, achieved via beam training protocols. Nevertheless, beam training is vulnerable to jamming attacks, where the attacker intends to send jamming signals over different spatial directions to confuse legitimate nodes. This paper focuses on defending against this attack in smart factories where a moving Automated Guided Vehicle (AGV) communicates with a base station via a mmWave carrier. We introduce a defensive strategy to cope with jamming attacks, including two stages: jamming detection and jamming mitigation. Developed based on autoencoders, both algorithms can learn the characteristics/features of the received signals at the AGV. They can be employed consecutively before performing the downlink data transmission. In particular, once a jamming attack is identified, the jamming mitigation can be utilized to retrieve the corrupted received signal strength vector, allowing a better decision during the beam training operation. In addition, the proposed algorithm is straightforward and fully compliant with the existing beam training protocols in 5G New Radio. The numerical results show that not only the proposed defensive strategy can capture more than 80% of attack events, but it also improves the average signal-to-interference-plus-noise-ratio significantly, i.e., up to 15 dB.

6 December 2022 in IEEE Access
Verified
Journal Article
Open access
BCBerna Bulut Cebecioglu
Berna Bulut Cebecioglu
YMYuen Kwan Mo
Yuen Kwan Mo
SDSon Dinh-Van
Son Dinh-Van
DFDaniel S. Fowler
Daniel S. Fowler
AEAlex Evans
Alex Evans
MHMatthew Higgins
Matthew Higgins
This paper presents sub-6 GHz channel measurements using a directional antenna at the transmitter and a directional or omnidirectional antenna at the receiver at 4.145 GHz in sparse and dense industrial environments for a line-of-sight scenario. Furthermore, the first measured over-the-air error vector magnitude (EVM) results depending on different 5G new radio modulation and coding schemes (MCSs of16 QAM, 64 QAM and 256 QAM) are provided. From the measurement campaigns, the path loss exponents (PLE) using a directional and an omnidirectional antenna at the receiver in the sparse and the dense environment are 1.24/1.39 and 1.35/1.5, respectively. PLE results are lower than the theoretical free space PLE of 2, indicating that indoor industrial environments have rich multipaths. The measured power delay profiles show the maximum root mean square (RMS) delay spreads of 11 ns with a directional antenna and 34 ns with an omnidirectional antenna at the receiver in a sparse industrial environment. However, in a dense industrial environment the maximum RMS delay spreads are significantly increased: maximum RMS delay spreads range from 226 to 282 ns for the omnidirectional and the directional antenna configuration. EVM measurements show that to increase coverage and enable higher MCS modes to be used for reliable data transmission, in both industrial environments using a directional antenna at the transmitter and the receiver is required. The large-scale path loss models, multipath time dispersion characteristics and EVM results provide insight into the deployments of 5G networks operating at sub-6 GHz frequency bands in different industrial environments.

30 June 2023 in IEEE Open Journal of the Industrial Electronics Society
Verified
Journal Article
Open access
Daniel S. FowlerDaniel S. Fowler
Daniel S. Fowler
YMYuen Kwan Mo
Yuen Kwan Mo
AEAlexander Evans
Alexander Evans
SDSon Dinh-Van
Son Dinh-Van
BABilal Ahmad
Bilal Ahmad
CMCasten Maple
Casten Maple
Factory automation design engineers building the Smart Factory can use wireless 5G broadband networks for added design flexibility. 5G New Radio builds upon previous cellular communications standards to include technology for “massive machine-type communication” and “ultra-reliable and low-latency communication”. In this work, the authors augment an automated guided vehicle with 5G for additional capabilities (e.g., streaming high-resolution video and enabling long-distance teleoperation), increasing the mobile applications for industrial equipment. Such use cases will provide valuable knowledge to engineers examining 5G for novel smart manufacturing solutions. Our 5G private network testbed is a platform for wireless performance research in industrial locations and provides a development mule for flexible smart manufacturing systems. The rival wireless technology to 5G in industrial settings is Wi-Fi and it is included in the testbed. Furthermore, the authors noted challenges, often unconsidered, facing the move to digital manufacturing technologies. Therefore, the authors summarise the emerging challenges when implementing new digital factory systems, including challenges linked to societal concerns around sustainability and supply chain resilience. The new Smart Factory technologies, including 5G communications, will have their roles to play in alleviating these challenges and ensuring economies have resilient future factories.

24 June 2024 in IEEE Access
Verified
Journal Article
Open access
BCBerna Bulut Cebecioglu
Berna Bulut Cebecioglu
YMYuen Kwan Mo
Yuen Kwan Mo
SDSon Dinh-Van
Son Dinh-Van
AEAlex Evans
Alex Evans
De MiDe Mi
De Mi
AAAdel Aneiba
Adel Aneiba
Private 5G networks for industrial users are emerging as one of the leading advanced 5G use cases. This timely work presents a comprehensive experimental analysis of a private 5G network conducted in sparse and dense industrial environments at sub-6 GHz. Measured results of the over-the-air error vector magnitude (EVM) are provided, considering signal-to-noise ratio (SNR) for different 5G new radio modulation and coding schemes (MCSs), bandwidths (BWs) and numerologies (subcarrier spacings) using omnidirectional or directional antenna configurations at the transmitter (TX) and the receiver (RX). Channel sounding measurements are also conducted to characterise the channels in terms of root mean square (RMS) delay spread. The measurement results show that channels in the dense industrial environment have greater RMS delay spreads than in the sparse industrial environment due to strong reflected or scattered multipath components with significant delays. This results in higher EVMs and bit error rates (BERs), i.e., as the RMS delay spread increases, a higher SNR is required to meet the EVM limits. It is also observed that using directional antennas at the TX and RX in both environments reduces the RMS delay spread and hence the inter-symbol interference and the EVM. This allows higher MCS modes (e.g., 64 QAM and 256 QAM) to be used for reliable data transmission, significantly improving the bandwidth efficiency and reducing the latency. When evaluating system performance for different BWs and numerologies, using a lower BW and numerology provides a better system performance (lower EVMs and BERs), especially in dense industrial environments.

5 November 2024 in IEEE Open Journal of the Communications Society
Verified
Journal Article
Open access
SDSon Dinh-Van
Son Dinh-Van
Hien Quoc NgoHien Quoc Ngo
Hien Quoc Ngo
SCSimon Cotton
Simon Cotton
YMYuen Kwan Mo
Yuen Kwan Mo
MHMatthew Higgins
Matthew Higgins
This paper considers wireless power transfer (WPT) for powering low-power devices in massive Machine Type Communication (mMTC) using a distributed massive multiple-input multiple-output (MIMO) system. Each Internet of Things (IoT) device can be served by one or more access points (APs) which is equipped with a massive antenna array. During each time slot, each IoT device transmits pilot sequences to enable APs to perform channel estimation. This process is followed by the WPT using conjugate beamforming. The approach to transmission power control is formulated as a non-convex optimization problem aiming to maximize the total accumulated power achieved by all IoT devices while taking into account the power weights at the APs, pilot power control at the IoT devices, and the non-linearity of practical energy harvesting circuits. An alternating optimization approach is adopted to solve it iteratively, achieving convergence within just a few iterations. Furthermore, since the number of IoT devices might be enormous in mMTC networks, we propose a pilot sharing algorithm allowing IoT devices to reuse pilot sequences effectively. Numerical results are provided to validate the effectiveness of the proposed power control algorithms and the pilot sharing scheme. It is shown that by allowing IoT devices to share the pilot sequences instead of employing the orthogonal pilots, the per-user accumulated performance is enhanced considerably, especially when the number of IoT devices is large relative to the coherence interval. The advantage of using distributed massive MIMO compared to its collocated counterpart is demonstrated in terms of the per-user accumulated power.

4 March 2026 in IEEE Open Journal of Intelligent Transportation Systems
Verified
Journal Article
Open access
ZZZhanle Zhao
Zhanle Zhao
SDSon Dinh-Van
Son Dinh-Van
YMYuen Kwan Mo
Yuen Kwan Mo
SKSiddartha Khastgir
Siddartha Khastgir
MHMatthew Higgins
Matthew Higgins
Connected braking can reduce fatal collisions in connected and autonomous vehicles (CAVs) by using reliable, low-latency 5G New Radio (NR) links, especially NR Sidelink Vehicle-to-Everything (V2X). In rural areas, road side units are sparse and power-constrained, so energy efficiency must be considered alongside safety. This paper studies how three communication control factors including subcarrier spacing (SCS), modulation and coding scheme (MCS), and transmit power ( ${\boldsymbol{P}}_{\text {t}}$ ) should be configured to balance safety and energy consumption in rural scenarios in light and heavy traffic scenarios. Safety is quantified by the packet receive ratio (PRR) against the minimum communication distance ${\boldsymbol{D}}_{\text {comm}}$ , defined as the distance that the vehicle travels during the transmission of the safety message. Results show that, under heavy traffic, increasing ${\boldsymbol{P}}_{\text {t}}$ and selecting a low-rate MCS at SCS = 30 kHz sustains high PRR at ${\boldsymbol{D}}_{\text {comm}}$ , albeit with higher energy cost. In light traffic, maintaining lower ${\boldsymbol{P}}_{\text {t}}$ with low MCS levels achieves a favorable reliability-energy trade-off while preserving acceptable PRR at ${\boldsymbol{D}}_{\text {comm}}$ . These findings demonstrate the necessity of adaptive, energy-aware strategy to guarantee both safety and energy efficiency in rural V2X systems.