Multilayer structural design (including sandwich structure) has received wide attention due to its complementary advantages of different layers in the field of high energy density dielectric materials. Although multilayer polymer composites with improved breakdown strength and energy density have been prepared in some studies, the key mechanism is not clear. In this work, different kinds of multilayer films consisting of various pure polymer [polyimide, poly(vinylidene fluoride) (PVDF), and polypropylene (PP)] layers were prepared to investigate the underlying mechanism of improved performances by multilayer structural design. Experimental results indicated that the relative position of the multilayer film and electrode had an effect on the result of breakdown strength. Meanwhile, when the layer with high relative permittivity (high-k layer) came in contact with the negative electrode, the thinner the high-k layer was, the more remarkable the enhancement of the multilayer materials breakdown strength was. Finally, a double-layer film of PP and PVDF with a Weibull breakdown strength of 649.31 MV/m, which was 60.83 MV/m higher than that of the commercial PP film, was prepared. The simulation result showed that the coating high-k layer could effectively restrain the local electric field distortion around the defect. This study reveals an effective way to improve the breakdown strength of films, which is of great significance for the improvement of capacitor performance and enhancement of energy storage.
Maintaining high charge/discharge efficiency while enhancing discharged energy density is crucial for energy storage dielectric films applied in electrostatic capacitors. Here, a nano-submicron structural film comprising ferroelectric material P(VDF-HFP) and linear dielectric material PMMA has been flexibly designed via the electrospinning process. Nano-submicron structure enables the film to maximize the ferroelectric material component and obtain improved dielectric performance without sacrificing breakdown strength and charge/discharge efficiency. As a result, the 40%-420 nm PMMA-P(VDF-HFP)@PMMA sample achieved an discharged energy density of 13.72 J/cm³ at a field of 740 kV/mm, with an impressive charge/discharge efficiency of 80%. This work presents a composite dielectric film that excels in breakdown strength, discharged energy density, and charge/discharge efficiency, offering a strategy for designing reliable, industrial-grade energy storage dielectrics.
Polymer composites with high energy density have been of great interest to scientists for a long time, and this accounts for a great wealth of experimental data that are available for interpretation. One of the important phenomena is the variation rate of the permittivity of composites, which always deviates from the linear increase and rises steeply toward the high concentration. Interestingly, the critical transition concentration is always located in the range of 20 vol. %–25 vol. %, but still far less than the common percolation threshold of composites. Through the analysis of the local electric field distribution and surface polarized charges distribution, the phenomenon is successfully interpreted as the effect of the electrostatic interactions between the adjacent polarized particles. Two specified composite configurations (BCC and FCC) are designed, and their dielectric properties have been systematically studied with the help of the finite element method and the phase field method. The simulation results indicate that the strength of the particles’ interaction is short-range effective and depends closely on the gap distance between adjacent particles. When the gap distance is smaller than 0.8 times the radius of the particles, which is tantamount to the concentration larger than 20 vol. % and 25 vol. % for BCC and FCC, respectively, the electrostatic interaction of the particles is rather significant, resulting in an additional contribution on the variation of the dielectric properties of composites and vice versa. The synchronous variation tendency between the simulation results and experimental measurements demonstrates the effect of electrostatic interaction on the dielectric properties of composites.
Recent advances in the electrospinning technique offer significant opportunities for improved fiber reinforced polymer composites of interest for capacitor applications. Classical effective medium approximation may fail to reach exact solutions due to the intricately inhomogeneous distribution of the depolarizing field in fibers with arbitrary orientation degrees. In this work, a three-dimensional finite element method (FEM) model has been developed to in-depth study the effects of fiber alignment on the dielectric response in fiber/polymer composites. A quantitative relationship between the effective permittivity of composites and the alignment degree of fiber has been initially established. Furthermore, we define a parameter of the effective angle which has the equivalent contribution on the effective permittivity with the actually distributed multiple alignment angles of fibers in practical composite materials. The calculation results with FEM show good agreement with the experiment measurements delivered recently.