State Key Laboratory of Intelligent Power Distribution Equipment and System, School of Electrical and Information Engineering, Tianjin University, Tianjin, China
Auto-generated profile, based on publicly available information
Guozheng Cao
State Key Laboratory of Intelligent Power Distribution Equipment and System, School of Electrical and Information Engineering, Tianjin University, Tianjin, China
To prominently suppress the dielectric loss of flaky-Cu (f-Cu)/poly(vinylidene fluoride) (PVDF) while still holding a high permittivity (k), silica (SiO2) encapsulated f-Cu core-shell structured particles were prepared through a sol-gel method, and the f-Cu@SiO2 were incorporated into PVDF to expect a high-k but low loss composites. The dielectric properties and thermal conductivity (TC) of the composite were explored in terms of the SiO2 shell. The results manifest that the f-Cu@SiO2 remarkably decreases the dielectric loss and conductivity of the composites thanks to the presence of SiO2 interlayer preventing the pristine f-Cu from direct contact. The thickness of SiO2 interlayer should be finely tuned to exert the optimal influence on dielectric properties and TC of composites. Furthermore, the dielectric properties and TC of the composites were thoroughly investigated as a function of the weight ratio of SiO2 to f-Cu, catalyst loading and reacting temperature. When the weight ratio, catalyst loading and reacting temperature values are set as 1:(0.1–0.15), 1.0 vol.%, and 50°C, respectively, the best dielectric properties and enhanced TC can be reached. The prepared Cu@SiO2/PVDF composites with a high-k but low loss, as well as enhanced TC, show more promising applications for microelectronic and electrical industry.
20 April 2021 in Polymer-Plastics Technology and Materials
To suppress the high dielectric loss of graphene oxide (GO)/poly(vinylidene fluoride) (PVDF) while still maintaining a high dielectric constant (k) near the filler percolation threshold, herein, GO nanosheets coated with polyvinyl pyrrolidone (PVP), poly(dopamine) (PDA) and tannic and Fe coordination complexes (TA-Fe), respectively, were incorporated into PVDF to investigate the effects of the three kinds of insulating interlayers on the dielectric properties of the nanocomposites. The results indicate that compared with pristine GO, all surface modified GO exhibit homogeneous dispersion in the matrix owing to the enhanced interface between fillers and matrix, and that the dielectric loss of the nanocomposites are significantly suppressed to rather low levels thanks to the presence of various insulating interlayers between GO nanosheets, which prevent them from direct contact, thereby remarkably reducing the leakage current and conductivity. Moreover, Activation energies for the pristine and modified GO/PVDF nanocomposites are calculated, respectively, and the introduction of insulating interlayers significantly reduces the relaxation activation energy of the nanocomposites.
18 March 2026 in IEEE Transactions on Industry Applications
This paper investigates the evolution of space charge (SC) and electric field (EF) in factory joints (FJs) for ±500 kV submarine cables under DC and polarity reversal (PR) conditions. The FJ insulation samples are prepared for PEA and SPD measurement. A charge transport model for FJ insulation is established and validated. The results show that, compared with the cable insulation (CI), the reinforcing insulation (RI) with a shorter degassing time overall exhibits a higher impurity content, higher carrier mobility, and shallower trap levels. These differences result in the interfacial charge accumulation. Under DC voltage, the interfacial charge density increases with polarization time, weakening the interfacial EF and increasing its angular deviation. As the temperature gradient (ΔT) increases, the combined effects of SC and interfacial charge lead to a gradual rise in the EF on the outer side of the insulation transition region. During PR, charge recombination is the dominant behavior at the interface. The SC and interfacial charge are not fully dissipated at the end of PR, making the interface a critical location for EF distortion. The maximum interfacial EF at ΔT = 30 °C increases by 76.63% compared with that at 0°C, confirming that a higher ΔT exacerbates EF distortion. This study reveals the SC and EF characteristics in FJ insulation under different conditions, which have potential significance for the design and reliability enhancement of HVDC submarine cable systems.
1 January 2026 in IEEE Transactions on Dielectrics and Electrical Insulation