27 October 2022 in IEEE Transactions on Circuits and Systems II: Express Briefs
This paper presents a compact structure for the filtering power divider (FPD) with wide absorptive bandwidth as well as good isolation between the output ports. A composite T-shape network that consists of a pair of resistors and a central shorted stub is used for realizing good isolation and absorption simultaneously. The isolation resistors that are essential in the FPD can be shared to absorb the signal reflected back to the input port. To enhance the absorption performance, only one synergistic absorptive stub is required and added to the input port. It allows the absorption performance to be independently controllable without affecting the passband response. The dual functions of wideband filtering response and power division are achieved by integrating the power divider and the bandpass filter using a compact three-line coupled structure. A pair of shorted stubs loaded at the ends of coupled-feed lines for outputs can provide controllable passband bandwidth and transmission zeros. To verify the proposed design concept, the multifunctional FPD with the compact structure is fabricated and measured. Good agreements between the measured and simulated results verify the calculated predictions.
26 July 2021 in IEEE Transactions on Circuits and Systems II: Express Briefs
A novel quasi-reflectionless bandpass filter (BPF) using double-sided parallel-strip line (DSPSL) is proposed in this brief. It is composed of a BPF and two symmetric absorptive bandstop filters (ABSFs) terminated by a pair of resistors that can dissipate the input untransmitted signal energy. Through detailed analysis, the high characteristic impedance is required for the open-circuited stubs of the ABSFs to enhance the selectivity. This cannot be realized in traditional microstrip designs, but it can be obtained easily by offsetting the DSPSL. Meanwhile, the BPF with T-shaped structure consists of a half-wavelength ( $\lambda /2$ ) DSPSL with a centrally-loaded $\lambda /2$ stub, which answers for generating two transmission zeros (TZs) to achieve better out-of-band suppression. For demonstration, a prototype is designed, fabricated and measured, and the simulated and measured results with good agreement are presented.
5 October 2018 in IEEE Transactions on Industrial Electronics
This paper presents an overall investigation of the frequency-tuning mechanism of the varactor-loaded $\lambda/4$ stepped-impedance resonator (SIR). The relationships between the tuning ranges of the resonant frequencies (fundamental frequency ( $f_1$ ) and harmonics) and the basic parameters of the varactor-loaded SIR are theoretically analyzed and given in detail. It can be found that the loading location of the varactor and the SIR parameters (characteristic impedances and length ratio of the two sections) have significant effect on the frequency-tuning range. Benefiting from the discriminating responses of $f_1$ and $f_3$ (third harmonic) to the loading location of the varactor, $f_1$ can be well tuned as the varactor's capacitance changes while $f_3$ is fixed, when the varactor is loaded at the voltage-null point of $f_3$ on the $\lambda/4$ SIR. Thus, a stable wide stopband can be achieved due to the fixed $f_3$ , which acts as the lowest spurious in the design of tunable filter. For demonstration, a second-order tunable filter with stable wide stopband and constant fractional bandwidth (FBW) is implemented and measured. In the tuning process of the passband operating at $f_1$ , the lowest spurious resulting from $f_3$ is immobile, which is always more than $4f_1$ . The simulated and measured results with good agreement are presented to verify the theoretical predictions.
1 December 2020 in IEEE Transactions on Circuits and Systems II: Express Briefs
A microstrip tunable diplexer with two separatelydesignable channels and multiple transmission zeroes (TZs) using common element-loaded uniform impedance resonator (UIR) is proposed. The common UIR operating in third harmonic (f3) and fifth harmonic (f5) is used for designing the two diplexer channels. The stub is loaded at the voltage-null point of f3 on the common UIR and the varactor is loaded at the open end of the stub. The varactor-loaded stub can separately tune f5 but has no effect on f3 so that the two channels can be separately designed. Meanwhile, the input port is tap-connected to the common UIR, which necessarily produces a common TZ between f3 and f5, existing in both channel filtering responses. In the tunable high channel design (at f5), the major design concept relies on choosing the properly values of three varactor diodes, the desired external quality factor and coupling coefficient can be easily obtained for realizing the constant absolute bandwidth (ABW). By properly choosing coupling schemes of the two channels, more TZs are realized at the desired locations. For demonstration, a diplexer with a fixed low channel and a tunable high channel with the constant ABW is designed, fabricated and measured.
1 May 2024 in IEEE Antennas and Wireless Propagation Letters
A contactless varactor-loaded bandwidth-enhanced frequency-reconfigurable (FR) antenna (FRA) is proposed. On account of the different E-field distributions of the TM10 and TM30 modes, six shorting pins are introduced in the voltage zero of the E-field of the TM30 mode to push up the TM10 mode, which helps degenerate two modes to broaden the bandwidth. After that, a pair of frequency tuning lines with varactors attached to one end is partially inserted under the patch in a novel way to continuously tune the two modes simultaneously. The novel varactor-loading scheme obtains a trade-off between a high efficiency of larger than 50% and the frequency tuning range of 22.2% (2.04-2.55 GHz). The measured bandwidth exceeds 7.5%, exhibiting a bandwidth enhancement characteristic, and the peak gain varies between 6 and 7.9 dBi over the entire band.
7 May 2019 in IEEE Access
This paper presents a new loading scheme for adding the varactor and PIN diodes into a quarter-wavelength (λ/4) resonator. Based on this, a novel reconfigurable filter with simultaneously tunable and switchable passband is introduced. Constant absolute bandwidth (ABW) and two transmission zeroes (TZs) can be obtained to enhance the passband performance in the ON-state. As the passband is turned to the OFF-state, high isolation can be realized at the frequency of interest. Meanwhile, the varactors, which are used to control the external quality factor (Qe) in the ON-state, can be tuned to improve the in-band isolation in the OFF-state. For demonstration, a reconfigurable filter with tunable and switchable passband is fabricated and measured. The measured results show a high selectivity tunable passband with the tuning range of 32.4% and 3-dB ABW of 51 ± 2 MHz in the ON-state. The isolation >40dB can be achieved in the OFF-state. Good agreement of the simulated and measured results is presented to verify the theoretical predictions.