Donatella Tozzi

Donatella Tozzi

Auto-generated profile, based on publicly available information

Donatella Tozzi

Dipartimento di Fisica, Università di Roma Sapienza, 00185, Roma

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 February 2026 in The European Physical Journal C
Verified
Journal Article
Open access
PDF file
FAFernando Domingues Amaro
Fernando Domingues Amaro
RARita Antonietti
Rita Antonietti
EBElisabetta Baracchini
Elisabetta Baracchini
LBLuigi Benussi
Luigi Benussi
SBStefano Bianco
Stefano Bianco
DTDonatella Tozzi
Donatella Tozzi
The use of gaseous Time Projection Chambers enables the detection and the detailed study of rare events due to particles interactions with the atoms of the gas with energy releases as low as a few keV. Due to this capability, these instruments are being developed for applications in the field of astroparticle physics, such as the study of dark matter and neutrinos. To acquire events occurring in the sensitive volume with a high granularity, the Cygno collaboration is developing a solution where the light generated during the avalanche processes occurring in a multiplication stage based on Gas Electron Multiplier (GEM) is read out by optical sensors with very high sensitivity and spatial resolution. To achieve a high light output, gas gain values of the order of $$10^5\text {-}10^6$$ 10 5 - 10 6 are needed. In this working condition, a dependence of the detector response on the spatial density of the charge collected in the GEM holes has been observed, indicating a gain-reduction effect likely caused by space-charge buildup within the multiplication channels. This paper presents data collected with a prototype featuring a sensitive volume of about two liters, together with a model developed by the collaboration to describe and predict the gain dependence on charge density. A comparison with experimental data shows that the model reproduces, with a percent-level precision, the gain behaviour over nearly one order of magnitude.

6 November 2025 in The European Physical Journal C
Verified
Journal Article
Open access
PDF file
FAFernando Amaro
Fernando Amaro
RARita Antonietti
Rita Antonietti
EBElisabetta Baracchini
Elisabetta Baracchini
LBLuigi Benussi
Luigi Benussi
SBStefano Bianco
Stefano Bianco
DTDonatella Tozzi
Donatella Tozzi
The CYGNO experiment is developing a high-resolution gaseous Time Projection Chamber with optical readout for directional dark matter searches. The detector uses a helium-tetrafluoromethane (He:CF $$_4$$ 4 60:40) gas mixture at atmospheric pressure and a triple Gas Electron Multiplier amplification stage, coupled with a scientific camera for high-resolution 2D imaging and fast photomultipliers for time-resolved scintillation light detection. This setup enables 3D event reconstruction: photomultiplier signals provide depth information, while the camera delivers high-precision transverse resolution. In this work, we present a Bayesian Network-based algorithm designed to reconstruct the events using only the photomultiplier signals, inferring a 3D description of the particle trajectories. The algorithm models the light collection process probabilistically and estimates spatial and intensity parameters on the Gas Electron Multiplier plane, where light emission occurs. It is implemented within the Bayesian Analysis Toolkit and uses Markov Chain Monte Carlo sampling for posterior inference. Validation using data from the CYGNO LIME prototype shows accurate reconstruction of localized and extended straight tracks. Results demonstrate that the Bayesian approach enables robust 3D description and, when combined with camera data, opens the way to future improvements in spatial and energy resolution. This methodology represents a significant step forward in directional dark matter detection, enhancing the identification of nuclear recoil tracks with high spatial resolution.

1 April 2026 in Machine Learning: Science and Technology
Verified
Journal Article
Open access
FAF D Amaro
F D Amaro
RAR Antonietti
R Antonietti
EBElisabetta Baracchini
Elisabetta Baracchini
LBLuigi Benussi
Luigi Benussi
CCCesidio Capoccia
Cesidio Capoccia
DTDonatella Tozzi
Donatella Tozzi
Optical-readout time projection chambers (TPCs) produce megapixel-scale images whose fine-grained topological information is essential for rare-event searches, but whose size challenges real-time data selection. We present an unsupervised, reconstruction-based anomaly-detection strategy for fast region-of-interest (ROI) extraction that operates directly on minimally processed camera frames. A convolutional autoencoder (AE) trained exclusively on pedestal images learns the detector noise morphology without labels, simulation, or fine-grained calibration. Applied to standard data-taking frames, localized reconstruction residuals identify particle-induced structures, from which compact ROIs are extracted via thresholding and spatial clustering. Using real data from the CYGNO optical TPC prototype, we compare two pedestal-trained AE configurations that differ only in their training objective, enabling a controlled study of its impact. The best configuration retains ( 93.0 ± 0.2 ) % of reconstructed signal intensity while discarding ( 97.8 ± 0.1 ) % of the image area, with an inference time of ∼25 ms per frame on a consumer GPU. The results demonstrate that careful design of the training objective is critical for effective reconstruction-based anomaly detection and that pedestal-trained AEs provide a transparent and detector-agnostic baseline for online data reduction in optical TPCs.

1 June 2026 in Journal of Instrumentation
Verified
Journal Article
Open access
FAF.D. Amaro
F.D. Amaro
RAR. Antonietti
R. Antonietti
EBElisabetta Baracchini
Elisabetta Baracchini
LBLuigi Benussi
Luigi Benussi
CCC. Capoccia
C. Capoccia
DTD. Tozzi
D. Tozzi
The CYGNO collaboration is developing a novel strategy for directional Dark Matter searches based on a gaseous Time Projection Chamber (TPC). The detector is optimized for the exploration of light (0.5–50 GeV) WIMPs-like particles and employs a He/CF 4 gas mixture at atmospheric pressure, sensitive to both spin-dependent and spin-independent interactions. A key feature of the project is its optical readout, which relies on photon detection rather than charge collection. In CYGNO detectors, electrons released by ionizing tracks drift toward an amplification stage of three Gas Electron Multipliers (GEMs). The electron avalanches generate scintillation light that is captured by scientific CMOS (sCMOS) cameras for high-resolution two-dimensional imaging and by Photomultiplier Tubes (PMTs) that provide a precise time profile along the drift direction. This allows a 3D event reconstruction, detailed energy deposition mapping, and effective topology and head-to-tail discrimination. Building on the achievements of the 50 L prototype (LIME), which successfully operated underground at LNGS, the next step is the deployment of a 0.4 m 3 demonstrator, CYGNO-04, to be completed in 2026. The demonstrator will validate scalability and confirm the advantages of the proposed technique. Recent results from LIME highlight strong progress in 3D tracking and particle identification. The current status of CYGNO-04 and its role in advancing the program will be presented as well.

1 April 2026 in Journal of Instrumentation
Verified
Journal Article
Open access
FAF.D. Amaro
F.D. Amaro
RAR. Antonietti
R. Antonietti
EBElisabetta Baracchini
Elisabetta Baracchini
LBLuigi Benussi
Luigi Benussi
CCC. Capoccia
C. Capoccia
DTD. Tozzi
D. Tozzi
The CYGNO experiment employs an optical readout to image particle interactions in a gaseous Time Projection Chamber (TPC), combining cameras and photomultiplier tubes (PMTs) to achieve high spatial resolution and timing information. This approach enables detailed track reconstruction but poses significant challenges for data acquisition, particularly in view of the next experimental phase, CYGNO-04, which will operate multiple cameras simultaneously. In this paper, we present an upgrade of the CYGNO Trigger and Data Acquisition (T-DAQ) system, developed starting from the LIME configuration and validated on the MANGO prototype. The upgrade introduces a continuous imaging acquisition mode, substantially reducing the camera dead time, together with an extended trigger time-tagging scheme that provides a robust global time reference for PMT signals. A synchronous multi-camera DAQ architecture is also implemented and tested, enabling coordinated operation of multiple optical sensors without a master camera. The performance of the upgraded system is validated through dedicated tests, demonstrating stable continuous acquisition, reliable time-tagging, and consistent synchronization across multiple cameras. These results establish a solid and scalable foundation for the CYGNO-04 DAQ and represent a key step toward efficient data acquisition in future large-scale optical TPC detectors.

1 June 2026 in Journal of Instrumentation
Verified
Journal Article
Open access
FAF.D. Amaro
F.D. Amaro
RAR. Antonietti
R. Antonietti
EBElisabetta Baracchini
Elisabetta Baracchini
LBLuigi Benussi
Luigi Benussi
SBS. Bianco
S. Bianco
DTD. Tozzi
D. Tozzi
Gaseous Time Projection Chambers with Optical Readout are sensitive detectors suitable for 3D measurement of low-energy particles (of order 1 keV) and are proposed for detecting rare events such as Dark Matter particle interactions. The CYGNO collaboration is developing such a detector with a high spatial and energy resolution, leveraging an innovative optical readout system. A reliable simulation of the detector response is needed to properly assess the physics reach of this technique and to better understand the performance of the detector in the development phase. Such a simulation cannot entirely rely on existing software packages; indeed, none of the available tools is capable of properly and reliably treating the different phenomena occurring in the detector, from the primary interaction in the gas volume throughout the whole detector response model, including charge transport, light production and propagation, and the response of the optical sensors. In this paper, we present a modeling of the detector response tuned on the CYGNO Optical TPC case; a description of the method is reported together with comparisons with experimental data from the LIME prototype to demonstrate the simulation performances.