3 December 2021 in Science
Optomechanical upconversion: Molecules have rich signatures in their spectra at infrared wavelengths and are typically accessed with dedicated spectroscopic instrumentation. Chen et al . and Xomalis et al . report optomechanical frequency upconversion from the mid-infrared to the visible domain using molecular vibrations coupled to a plasmonic nanocavity at ambient conditions (see the Perspective by Gordon). Using different nanoantenna designs, one with a nanoparticle-on-resonator and the other with nanoparticle-in-groove, both approaches show the ability to upconvert the mid-infrared vibrations of the molecules in the nanocavity to visible light wavelengths. The effect could be used to simplify infrared spectroscopy, possibly with single-molecule sensitivity. —ISO
21 March 2024 in Advanced Materials Technologies
22 July 2024 in ACS Photonics
We introduce a flexible microscale all-fiber-optic Raman probe which can be embedded into devices to enable operando in situ spectroscopy. The facile-constructed probe is composed of a nested antiresonant nodeless hollow-core fiber combined with an integrated high refractive index barium titanate microlens. Pump laser 785 nm excitation and near-infrared collection are independently characterized, demonstrating an excitation spot of full-width-half-maximum 1.1 μm. Since this is much smaller than the effective collection area, it has the greatest influence on the collected Raman scattering. Our characterization scheme provides a suitable protocol for testing the efficacy of these fiber probes using various combinations of fiber types and microspheres. Raman measurements on a surface-enhanced Raman spectroscopy sample and a copper battery electrode demonstrate the viability of the fiber probe as an alternative to bulk optic Raman microscopes, giving comparable collection to a 10 objective, thus paving the way for operando Raman studies in applications such as lithium battery monitoring.
2 March 2024 in Nature Communications
The molecule-metal interface is of paramount importance for many devices and processes, and directly involved in photocatalysis, molecular electronics, nanophotonics, and molecular (bio-)sensing. Here the photostability of this interface is shown to be sensitive even to room light levels for specific molecules and metals. Optical spectroscopy is used to track photoinduced migration of gold atoms when functionalised with different thiolated molecules that form uniform monolayers on Au. Nucleation and growth of characteristic surface metal nanostructures is observed from the light-driven adatoms. By watching the spectral shifts of optical modes from nanoparticles used to precoat these surfaces, we identify processes involved in the photo-migration mechanism and the chemical groups that facilitate it. This photosensitivity of the molecule-metal interface highlights the significance of optically induced surface reconstruction. In some catalytic contexts this can enhance activity, especially utilising atomically dispersed gold. Conversely, in electronic device applications such reconstructions introduce problematic aging effects.
27 March 2026 in Advanced Materials Technologies
Battery performance degradation arises from multifactorial and complex electrochemical processes involving all the battery components. Therefore, identifying and mitigating/suppressing the main degradation mechanisms is essential for deploying these technologies. Such a holistic understanding requires advanced and dedicated analytical tools as well as effective strategies to recover battery capacity, extend battery life, and facilitate second‐life use and recycling of devices. Here, we develop a set of optical and microfluidic methodologies that enable operando chemical analysis of liquid electrolytes using Raman spectroscopy. We demonstrate that our methods have minimal perturbation on device operation and can be readily embedded in standard manufacturing processes. A bi‐directional microfluidic access port allows the extraction and reinjection of carbonate‐based electrolytes for analysis over hundreds of electrochemical cycles. Our data show that lithium salt anion (PF 6 − ) degradation is a major source of electrolyte degradation and capacity loss in industrially relevant Li‐ion pouch cells (Ni‐rich layered cathodes (NMC811), and graphite anodes). The effects are particularly strong when cycled to an upper‐cut voltage of 4.3 V. Finally, we demonstrate that battery capacity loss can be partially reversed by re‐infusing pristine, uncycled electrolyte via an integrated microfluidic access port. This strategy not only mitigates degradation and extends battery life but also offers a practical pathway toward second‐life applications and adaptable cell chemistries for future battery technologies.
27 July 2026 in Applied Physics Letters
In this work, we demonstrate the fabrication of a device to investigate electron–phonon coupling in quantum systems on a suspended island, together with a systematic study of submicrometer AuGeNi ohmic contacts required for its implementation. The island is separated from the substrate but electrically connected to the rest of the surrounding structure with four micrometer- or submicrometer-sized ohmic contacts and metal leads. The contacts are characterized on planar test structures and subsequently integrated into suspended devices. Square contacts with areas ranging from 1600 down to 0.0056 μm2 are fabricated in both surface-deposited and recessed geometries contacting a 20 nm GaAs quantum well, 50 nm below the surface, in a 120 nm thick GaAs/AlGaAs heterostructure. Two-point DC current–voltage (I–V) measurements at 77 and 3.8 K show that double annealing the contacts reliably produces ohmic behavior across all footprint sizes. Analysis of the area dependence of resistance reveals a critical area of (0.80 ± 0.01) μm2, corresponding to a transfer length (0.894 ± 0.013) μm and specific contact resistivities in the range of (0.5–2.3) × 10−6 Ω cm2, demonstrating that robust ohmic performance can be maintained at deep submicrometer dimensions. We further examine electrochemical etching effects in GaAs/AlGaAs and develop a fabrication pathway that avoids electrochemical damage, enabling the realization of a fully suspended Hall cross isolated from the phonon bath. This provides a platform for future studies of electron–phonon interactions and many-body-localization effects in semiconductor heterostructures.