1 October 2015 in Fusion Engineering and Design
1 October 2020 in Fusion Engineering and Design
1 September 2019 in Fusion Engineering and Design
20 September 2016 in IEEE Transactions on Plasma Science
A preconceptual design study for the Korean fusion demonstration tokamak reactor (K-DEMO) has been started in 2012. The results of the preliminary concept study on the K-DEMO divertor are summarized in this paper. An up-down symmetric double-null configuration is selected as a primary choice for study with high elongation of 2 and the triangularity of 0.625. For the vertical maintenance of the K-DEMO in-vessel components, upper and lower divertors are subdivided into 32 toroidal modules, respectively. With maintaining its functionality, the poloidal coverage of divertor is restricted to maximize the breeding area of blanket. The plasma radiation from the core and the edge plasma and the fusion neutron wall loading onto the first walls of the in-vessel components were calculated as heat sources to the structures of the in-vessel components. The divertor targets are tilted at ~10° against separatrix field line to handle the conceived engineering limit of steady 10 MW/m 2 of peak heat flux with ~50% of core plasma radiation and ~85% of divertor plasma radiation. Divertor adopts tungsten monoblock targets, reduced activation steel-based structures carrying the pressurized water coolant. Also, the preliminary electromagnetic force extrapolated from the ITER disruption events was considered as a mechanical load to the structures in addition to the coolant pressure. The developed concept on the target and structure is supported by preliminary thermohydraulic and structural analyses using ANSYS, which show that the temperature and the stresses are within their allowables.
24 August 2016 in IEEE Transactions on Plasma Science
Neutronic assessment is the important foundation of Korean fusion demonstration reactor (K-DEMO) study. Previously, preliminary neutronic calculations using a simplified model have been performed [1], and optimized structure of blanket module and shield material has been derived. Based on the previous calculation results, the advanced K-DEMO neutronic analysis model has been developed to perform more accurate and reliable neutronic assessments with the detailed configuration of vacuum vessel (VV), toroidal field (TF) coil, blanket, and shield. The advanced K-DEMO neutronic analysis model was imported into the integrated interface program by the help of Monte Carlo automatic modeling system to produce input files for the Monte Carlo neutron photon transport code analyses. The neutronic calculation on neutron wall loading (NWL) distribution, tritium breeding ratio (TBR), and nuclear heating in tokamak components was conducted for the newly developed advanced K-DEMO neutronic analysis model. In the NWL calculation, the peak was indicated at the inboard (IB) and the outboard (OB) blanket first wall with the value of 3.81 and 3.93 MW/m2. The different types of models by changing gaps between the blanket modules and the thickness of separated borated steel shield blocks are calculated to check global TBR and the shield performance. The global TBR of 1.017 was achieved with the 49.7and 76.2-cm-thick IB and OB blanket modules. The model with 1-cm-thick assembly gap between blanket modules, 22-cm-thick IB shield, 50-cm-thick OB shield, and 34-cm-thick divertor shield are considered as a reasonable shield model with the total nuclear heating in 16 TF coils and VV of 9 and 32 kW.
1 February 2016 in Fusion Engineering and Design