18 June 2018 in Biofabrication
3D bioprinting with cell containing bioinks show great promise in the biofabrication of patient specific tissue constructs. To fulfil the multiple requirements of a bioink, a wide range of materials and bioink composition are being developed and evaluated with regard to cell viability, mechanical performance and printability. It is essential that the printability and printing fidelity is not neglected since failure in printing the targeted architecture may be catastrophic for the survival of the cells and consequently the function of the printed tissue. However, experimental evaluation of bioinks printability is time-consuming and must be kept at a minimum, especially when 3D bioprinting with cells that are valuable and costly. This paper demonstrates how experimental evaluation could be complemented with computer based simulations to evaluate newly developed bioinks. Here, a computational fluid dynamics simulation tool was used to study the influence of different printing parameters and evaluate the predictability of the printing process. Based on data from oscillation frequency measurements of the evaluated bioinks, a full stress rheology model was used, where the viscoelastic behaviour of the material was captured. Simulation of the 3D bioprinting process is a powerful tool and will help in reducing the time and cost in the development and evaluation of bioinks. Moreover, it gives the opportunity to isolate parameters such as printing speed, nozzle height, flow rate and printing path to study their influence on the printing fidelity and the viscoelastic stresses within the bioink. The ability to study these features more extensively by simulating the printing process will result in a better understanding of what influences the viability of cells in 3D bioprinted tissue constructs.
12 December 2018 in Advanced Materials Technologies
16 November 2020 in Cellulose
It is predicted that the forest and materials from the forest will play an important role to enable the transformation from our linear present to a circular and sustainable future. Therefore, there is a need to understand the materials that can be extracted from the forest, and how to use them in an efficient manner. Here, carboxymethylated cellulose nanofibrils (CNF) from the forest are used to produce films and filaments with the aim to preserve the impressive mechanical properties of a single CNF in a macro-scale material. The mechanical properties of both the films (tensile strength of 231 MPa) and filaments (tensile strength of 645 MPa) are demonstrated to be maximized when the starting suspension is in a flowing state. This is a new insight with regards to filament spinning of CNF, and it is here argued that the three main factors contributing to the mechanical properties of the filaments are (1) the possibility to produce a self-supporting filament from a suspension, (2) the CNF alignment inside the filament and (3) the spatial homogeneity of the starting suspension. The results in this study could possibly also apply to other nanomaterials such as carbon nanotubes and silk protein fibrils, which are predicted to play a large part in future high performing applications. Graphic
21 September 2022 in Journal of Materials Chemistry A
The global efforts in electrifying our society drive the demand for low-cost and sustainable energy storage solutions. In the present work, a novel material concept was investigated to enable fabrication of several 10 meter-long rolls of supercapacitor paper electrodes on a pilot-scale paper machine. The material concept was based on cationized, cellulose-rich wood-derived fibres, conducting polymer PEDOT:PSS, and activated carbon filler particles. Cationic fibres saturated with anionic PEDOT:PSS provide a conducting scaffold hosting the activated carbon, which functions as the active charge-storage material. The response from further additives was systematically investigated for several critical paper properties. Cellulose nanofibrils were found to improve mechanical properties, while carbon black enhanced both the conductivity and the storage capacity of the activated carbon, reaching a specific capacitance of 67 F g−1. This pilot trial shows that “classical” papermaking methods are fit for the purpose and provides valuable insights on how to further advance bio-based energy storage solutions for large-scale applications.
30 October 2025 in Sustainable Chemistry for Climate Action