27 January 2025 in Optics Letters
We propose an iterative optimization approach for wavefront reconstruction in a rotational shearing interferometer based on Zernike polynomials. Two incorrect shearing amounts are optimized simultaneously, enabling the absolute reconstruction of wavefronts with high uniformity in the root mean square (RMS). Simulations under noisy conditions show that the reconstruction error, in terms of peak-to-valley (PV) and RMS, remains within the μλ range. The approach was experimentally validated by identifying asymmetric aberrations in an imperfectly collimated light source, showing strong agreement with the wavefront obtained from a Shack–Hartmann sensor.
26 August 2024 in IEEE Photonics Technology Letters
A novel approach for wavefront reconstruction in rotational shearing interferometer is proposed. The correlation between the original and rotational wavefront is represented in matrix formalism, and the Zernike coefficient of the original wavefront is calculated from the interferogram wavefront through this matrix. We demonstrated the reconstruction ability of the method is efficient with negligible reconstruction errors by simulation. Experimental validation through the self-crosscheck property is introduced to indicate a uniform aberration of our collimator with high agreement.
7 February 2025 in International Journal of Precision Engineering and Manufacturing
1 March 2026 in Optical Engineering
A straightforward interferometric method is proposed for testing a linear axicon surface by leveraging its inherent rotational symmetry. A planar referencing (PR) is placed at the center of the beam overlap region, referred to as the waist plane, to ensure ideal coincidence between the incident and reversal-reflected beams. This optical arrangement, termed the reversal double-pass configuration, is governed by a derived geometric relationship for PR positioning. The experimental implementation employs a modified Michelson interferometer integrated with a least-squares A-bucket phase retrieval algorithm, which enables robust phase extraction with arbitrary and unequal phase shifts, thus overcoming the limitations of the temporal phase-shifting techniques. The proposed method significantly simplifies alignment by reducing the required degrees of freedom (DoF) as the PR requires only three DoFs of adjustment. Surface testing of a commercial off-the-shelf linear axicon demonstrates strong agreement between the proposed interferometric method and those obtained from a commercial contact-type profiler (KLA Alpha-Step).
29 April 2026 in International Journal of Precision Engineering and Manufacturing
10 November 2026 in Engineering Research Express
A wavefront reconstruction method based on bilinear interpolation (BLI) is proposed for the rotational shearing interferometer (RSI). The proposed algorithms does not rely on predefined global basis functions. Instead, it directly reconstructs the wavefront from the interferogram wavefront through a pixel-wise interpolation framework, making it particularly suitable for practical implementations based on digital camera sensors. The reconstruction approach is formulated as a linear system describing the relationship between the original wavefront and its rotationally sheared one, thereby enabling numerical recovery of the original wavefront. This study identifies the primary source of reconstruction error in BLI as the neighbor-deficient error occurring near the boundary of a circular ROI, where insufficient neighboring points lead to localized reconstruction artifacts. To overcome this limitation, a padding strategy combined with extrapolation is introduced to recover the neighbor-deficient points before reconstruction. Simulation results demonstrate that the proposed approach effectively eliminates the neighbor-deficient error and significantly improves reconstruction accuracy, reducing the peak-to-valley (PV) error from 0.476λ to 0.003λ with a 9% padding ratio. Over rotational shearing angles ranging from 1° to 179°, the reconstruction errors remain on the order of 10-3λ in PV and 10-6λ in root-mean-square (RMS). The robustness of the proposed method under noisy conditions was also investigated using interferograms corrupted with additive noise corresponding to an SNR of 15, which is representative of practical measurements. Despite the increased reconstruction error under this noise condition, the dominant wavefront characteristics were successfully preserved, as confirmed by the strong agreement between the Zernike coefficients of the original and reconstructed wavefronts.