The effects of hot isostatic pressing (HIP) on crack-network healing, microstructural evolution, and the 900 °C tensile response of additively manufactured MAR-M247 were investigated. X-ray CT showed that HIP markedly reduced the interconnected crack network, with the porosity decreasing from 2.36% to 0.18%. Meanwhile, the original as-printed cellular/dendritic substructure was weakened, boundary-associated particulate phases became more pronounced, and the average characteristic particle size increased from below about 10 nm in the as-printed condition to about 30 nm after HIP. Despite the evident defect healing and microstructural redistribution, no significant improvement in the tensile response at 900 °C was obtained. These results indicate that the high-temperature mechanical benefit of HIP is not automatic, but is jointly governed by crack healing, microstructural redistribution, and second-phase evolution.