7 May 2018 in IEEE Journal of Emerging and Selected Topics in Power Electronics
This paper proposes a robust finite control set for DFIG power control. In this way, the proposed robust finite control has two components of the predicted rotor voltage. The first term calculates the voltage considering the rotor current references and the second term is designed considering the mistakes due to parameters estimation. The mentioned errors due to parameters variations were modeled as rotor current changes. Hence, the controller calculates the predicted rotor voltage considering parameter variations and rotor current references. So that, the minimized cost function selects the voltage vector to be supplied to the rotor of the machine. The influence of the estimation errors for variations on R2 and σL2 was also investigated. The results obtained in a setup confirm the controller performance.
16 July 2018 in IEEE Transactions on Sustainable Energy
This paper presents a finite control set applied to the direct power control for doubly fed induction generator under normal and voltage sag operation. The controller is designed by using the discretized equations of DFIG. In this case, the generator was modeled as function of reactive and active power, rotor voltage vector, and the flux variations. In this way, the future behavior of the rotor voltage is predicted by using the power error, flux variations, and the minimization of the cost function that allows us to select the optimal voltage vector. Hence, the proposed finite control set controller for direct power control will attend the power references under normal and sag operation. The results obtained in an experimental test bench validate the proposed finite control set controller for direct power control for doubly fed induction generator.
22 November 2013 in Journal of Control, Automation and Electrical Systems
31 March 2021 in Eletrônica de Potência
Este artigo propõe um procedimento de filtragem linear para aprimorar o desempenho de um algoritmo de PLL (Phase-Locked-Loop), baseado na estrutura de um integrador generalizado de segunda ordem (SOGI), utilizando um filtro de Fourier de um ciclo (OCF) para filtrar as tensões ab estacionárias geradas diretamente pela estrutura do SOGI. Além disso, faz-se uma comparação entre o SOGI convencional e também com um filtro de média móvel (MAF), sendo que este filtro é aplicado nas tensões dq síncronas produzidas pela transformação alfa/beta para dq na saída da estrutura SOGI. As comparações são realizadas em bancada experimental com emprego de sinais afetados por diferentes distorções harmônicas e com tensões de afundamento semelhantes às obtidas em redes de energia sob condições de falhas. Os resultados das comparações mostram que as duas abordagens, OCF e MAF, melhoram a dinâmica do SOGIPLL convencional para rastrear mudanças abruptas de frequência. Embora a proposta com emprego do OCF apresente um desempenho superior em algumas situações, é também mostrado que as oscilações apresentadas na estimativa de frequência pelo SOGI-PLL para sinais harmonicamente distorcidos são extinguidas.