7 April 2005 in Fusion Science and Technology
Compatibility between tritium self-sufficiency and neutron shielding performance of self-cooled liquid blanket systems without solid neutron multiplier was investigated for the purpose of application to the conceptual helical reactor design of modified FFHR2 having the blanket space of 120 cm. The results of the neutronics calculation indicated that all of the Li/V-alloy, Flibe/V-alloy and Flibe/JLF-1 (Reduced Activation Ferritic steel) blankets are feasible for tritium breeding ability and neutron shielding performance. With the use of vanadium alloys, operation efficiency will be enhanced.
18 February 2016 in IEEE Transactions on Applied Superconductivity
Conceptual design studies for the Large-Helical-Device-type helical reactor, i.e., FFHR-d1, are being conducted in the National Institute for Fusion Science. Three different cooling schemes and conductor types have been proposed for the superconducting magnet system. A multiscale structural analysis is used to assess the mechanical characteristics of the magnet structure, taking into account the types of cooling schemes and superconductors. Multiscale analysis evaluates both the stress distribution in the coil support structure and local stress in the constituents of the superconductors without rebuilding a finite-element model of the support structure. Concerning a segmented fabrication of the helical coils using a high-temperature superconductor, the feasibility of segment installation is confirmed using a three-dimensional printing model, which identifies the maximum segment length and the necessary gap in the coil casing to install a segment.
29 July 2011 in Nuclear Fusion
One of the key issues in the design of LHD-type heliotron reactors is to secure sufficient blanket spaces. In this respect, helical pitch parameter γ is quite important because it significantly affects both the coil and plasma shapes. For a quantitative understanding of the effect of helical pitch parameter on a design window, a system design code for LHD-type heliotron reactors HELIOSCOPE (HELIOtron System design COde for reactor Performance Evaluation) is developed and parametric scans are carried out with three cases of γ = 1.15, 1.20 and 1.25. It became clear that design windows of heliotron reactors depend significantly on the engineering constraints: the stored magnetic energy of the coil system, the inboard minimum blanket space and the averaged neutron wall load. In the case of a fusion power of 3 GW, γ = 1.20 is optimum for relaxing physics requirements. But γ = 1.15 is also a possible selection if a lower fusion power or a higher neutron wall load is accepted. Since design windows are quite sensitive to the engineering constraints and physics conditions, a further detailed study on design feasibility of advanced engineering components and the effect of γ on the physics conditions is expected to optimize the value of γ.
1 December 2002 in Journal of Nuclear Materials
1 November 2018 in Fusion Engineering and Design
28 January 2007 in Journal of Nuclear Materials