20 July 2022 in IEEE Transactions on Industrial Electronics
Comprehensive high-precision actuations are in growing demand to meet diversified needs in scientific and industrial fields. However, it is a great challenge for piezoelectric actuators with compact structure to guarantee high load capacity and wide velocity range (including fast motion velocity and high resolution) simultaneously. Herein, inspired by bionic methodology, a high-power-density bar-type linear piezoelectric ultrasonic actuator (LPUA) operating in the single second bending ( B2 ) mode with elaborate working principle is developed by imitating bicycle movement mechanism. The proposed B2 -LPUA actuator is simple and easy for miniaturization without multimodal decoupling problem. Under only one-phase voltage drive, the miniature bar-type actuator can produce continuously bidirectional motions with the maximum driving velocity, minimum driving velocity, load, and output power of 211.2 mm/s, 3.3 μ m/s, 5.4 N, and 218.3 mW, respectively, and the tested minimum step displacement is only 33 nm in open-loop control. Especially, its output power density (243 mW/cm 3 or 4.112 mW/cm 3 ⋅kHz) is at least twice larger than most reported LPUAs. The experimental results indicate that the proposed piezoelectric actuator with excellent actuation performances has broad application scenarios, and its bionic motion design method would have inspirational significance for creating new piezoelectric devices with more attractive properties.
9 April 2025 in IEEE Transactions on Industrial Electronics
Micro/nano systems integrated with piezo-actuation technology have garnered significant attention in recent years. Here, we report a millimeter-scale linear piezo-electric resonant actuator (LPRA) operating in two orthogonal, coupled first-order bending vibrations modes. The proposed LPRA is made of a piezoceramic-metal composited bar with a center hole defect, which causes a sudden stiffness reduction in dense composite bar, leading to a prominent increase in the center vibration amplitude, thereby significantly enhancing the electromechanical coupling and interface actuation effect. A two-phase equivalent circuit is further derived to explain the enhancement behavior of the artificial defect. Under one pair of orthogonal voltages of 100 Vpp at 190.8 kHz, the elaborated micro-LPRA with a weight of only 0.149 g can frictionally drive a slider moving linearly via its center resonant vibrations, generating a maximum pulling load of 0.34 N, a maximum velocity of 308 mm/s, and a minimum step displacement of only 30 nm in open-loop control. Correspondingly, its power density is as high as 0.67 W/cm3, which is about 3 to 20 times higher than those reported previously. The proposed LPRA and its stiffness tuning strategy will bring great beneficial for future micro, smart devices/systems development.