This paper explores the resistance of MOS current mode logic (MCML) against differential power analysis (DPA) attacks. Circuits implemented in MCML, in fact, have unique characteristics both in terms of power consumption and the dependency of the power profile from the input signal pattern. Therefore, MCML is suitable to protect cryptographic hardware from DPA and similar side-channel attacks. In order to demonstrate the effectiveness of different logic styles against power analysis attacks, the non-linear bijective function of the Kasumi algorithm (known as substitution box S7) was implemented with CMOS and MCML technology, and a set of attacks was performed using power traces derived from SPICE-level simulations. Although all keys were discovered for CMOS, only very few attacks to MCML were successful.
In this letter, we report on the fabrication and characterization of ambipolar silicon-nanowire (SiNW) field-effect transistors (FETs) with a double-independent-gate (DIG) structure for polarity control. Several structures are fabricated, showing the effectiveness of local back gate to enable switchable ambipolar functionality. Moreover, AND, NAND , NOR, XOR, and XNOR binary logic functions can be obtained with a single gate, depending on the encoding values used for the input signals. Repeatable behaviors of DIG SiNW FETs are considered as enablers for ambipolar-controlled logic, with all the benefits related to the maturity of the silicon technology.
25 November 2008 in IEEE Transactions on Nanotechnology
This paper presents a method enabling the evaluation of the averaging fault-tolerant technique, using the output probability density functions of unreliable units that are acquired from Monte Carlo simulations. The method has been verified by comparing numerical simulations and analytical developments. A fault-tolerant four-layer architecture using averaging and with both fixed and adaptable threshold is compared with triple and R-fold modular redundancy (RMR) techniques, at gate level and using fault-free decision gates, showing that the redundancy factor can be reduced by a factor of two to three using the proposed four-layer architecture, in replacement of RMR, thus enabling significant savings in the area, and power dissipation. The analysis of the reliability of averaging techniques together with the redundancy optimization has been performed for the first time in the context of a large-scale system, showing that a target reliability can be achieved with low redundancy factors (R < 8) for moderate defect densities (device failure rate up to 10-5). The performed analysis of the optimal size of the reliable islands (clusters) supports the assumption that clustering needs to be applied at the lower levels of design abstraction hierarchy, especially for fabrication technologies with increased defect density.
An innovative modular 3-D stacked multi-processor architecture is presented. The platform is composed of completely identical stacked dies connected together by through-silicon-vias (TSVs). Each die features four 32-bit embedded processors and associated memory modules, interconnected by a 3-D network-on-chip (NoC), which can route packets in the vertical direction. Superimposing identical planar dies minimizes design effort and manufacturing costs, ensuring at the same time high flexibility and reconfigurability. A single die can be used either as a fully testable standalone chip multi-processor (CMP), or integrated in a 3-D stack, increasing the overall core count and consequently the system performance. To demonstrate the feasibility of this architecture, fully functional samples have been fabricated using a conventional UMC 90 nm complementary metal-oxide-semiconductor process and stacked using an in-house, via-last Cu-TSV process. Initial results show that the proposed 3-D-CMP is capable of operating at a target frequency of 400 MHz, supporting a vertical data bandwidth of 3.2 Gb/s.