Djamila Boukhelkhal

Djamila Boukhelkhal

Auto-generated profile, based on publicly available information

Djamila Boukhelkhal

Civil Engineering Department, Yahia Fares University of Medea, Urban Pole, P.O. Box 164, Medea 26000, Algeria

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 May 2021
Verified
Book Chapter
Open access
PDF file
Mohamed GuendouzMohamed Guendouz
Mohamed Guendouz
DBDjamila Boukhelkhal
Djamila Boukhelkhal
ABAlexandra Bourdot
Alexandra Bourdot
OBOussama Babachikh
Oussama Babachikh
AHAmine Hamadouche
Amine Hamadouche
This work aims to study the valorization and recycling of ceramic wastes (wall tiles) as a fine aggregate instead of sand in the manufacturing of flowable sand concrete (FSC). For this, the sand is substituted with the ceramic wastes at different dosages (0, 5, 10, 15, 20, and 25% by volume of the sand). The influence of the ceramic wastes addition on the physical (workability, density) and mechanical (compressive, flexural and elastic modulus) properties of FSC was studied. The results show that the use of ceramic waste as partial replacement of sand contributes to reduce the workability, bulk density and improves the mechanical strengths of FSC according to the use of 25% of wall tiles waste.

17 December 2024 in STUDIES IN ENGINEERING AND EXACT SCIENCES
Verified
Journal Article
Open access
PDF file
HMHADJADJ Moussa Moussa
HADJADJ Moussa Moussa
MGMohamed Guendouz
Mohamed Guendouz
DBDjamila Boukhelkhal
Djamila Boukhelkhal
The sector of civil engineering has shifted towards the direction of sustainable development, with a focus on environmental protection as an important objective. This strategy is implemented by recycling and reusing polluted industrial by-products and waste. The manufacturing process of granite products generates huge quantities of granite waste (GW) worldwide, which causes environmental pollution when dumped. Self-compacting sand concrete (SCSC) is a novel, highly fluid, and durable concrete widely used as a construction material. In this work, the effect of using recycled waste granite (GW) and seashell powder (SSP) on the mechanical strength and compactness of eco-self-compacting sand concrete (SCSC) was studied. For this purpose, SSP has been used to substitute cement at levels of 5, 10, and 15% by weight, and GW replaced the natural sand at levels of 0, 10, 20, 30, and 40% by volume. The fresh properties of SCSC mixtures are evaluated by the mini-slump flow diameter. The compressive and flexural strengths and compactness of hardened SCSC were assessed. A SEM analysis was also used to examine the microstructure development of the hardened SCSC mixtures. The results indicate that using SSP for GW- based SCSC gives acceptable flowability with a low dosage of superplasticizer (SP). Moreover, an enhancement in compressive and flexural strengths and compactness of the SCSC mixtures was found by adding up to 40% GW combined with up to 15% SSP. 10SSP+40GW mix showed the highest mechanical strengths and compactness, with a denser microstructure after 90 days with an improvement of 30.61% and 35.82% in compressive and flexural strength, respectively, compared to control mixtures.

8 January 2025 in STUDIES IN ENGINEERING AND EXACT SCIENCES
Verified
Journal Article
Open access
PDF file
Mohamed GuendouzMohamed Guendouz
Mohamed Guendouz
DBDjamila Boukhelkhal
Djamila Boukhelkhal
LBLoubna Benatallah
Loubna Benatallah
SHSomia Hamraoui
Somia Hamraoui
HMHADJADJ Moussa Moussa
HADJADJ Moussa Moussa
Building materials generate about half of solid waste worldwide, with an environmental impact at every step of its production process, i.e., extraction of raw materials, processing, manufacturing, transportation, construction, and disposal at the end of a building’s useful life. Among these materials, we distinguish the marble powder waste (MW). This work aims to study the possibility of recycling MW, especially those from the cutting and polishing process of marble stone discharged in nature. After collecting, these wastes were crushed, extruded in the form of grains, and used in the mass of self-compacting sand concrete (SCSC) as a partial replacement of natural sand volume with different percentages (10, 20, 30, 40, and 50%). The obtained results show a decrease in the fluidity and an increase in the density and occluded air of SCSC with increasing MW content. However, the compressive and flexural strengths of SCSC are improved by about 24% and 28% for a 10% substitution ratio of natural sand with MW and maintained comparable to CSCSC for up to 50% MW. The capillary water absorption, shrinkage, and thermal conductivity of all MW-based SCSCs are greater than those of the control SCSC. However, up to 40% of MW content, all SCSC mixes are classified as acceptable for structural application with water absorption and shrinkage less than 10% and 1000 m/m, respectively. This study also ensures that reusing marble wastes in SCSC gives a positive approach to reduce the cost of materials and solve some environmental problems.

8 January 2025 in STUDIES IN ENGINEERING AND EXACT SCIENCES
Verified
Journal Article
Open access
PDF file
Mohamed GuendouzMohamed Guendouz
Mohamed Guendouz
DBDjamila Boukhelkhal
Djamila Boukhelkhal
HMHADJADJ Moussa Moussa
HADJADJ Moussa Moussa
LBLoubna Benatallah
Loubna Benatallah
The amount of industrial waste in household waste is significant and increasing over time. Due to their lifespan, these wastes currently constitute a major concern, requiring management from an economic, social or environmental point of view. With a focus on environmental preservation as a key goal, the sector of civil engineering has shifted towards sustainable development. Among the various landfilled industrial wastes, we distinguish the waste foundry sand (WFS) that is generated in large quantities. This work aims to study the recycling of foundry sand waste (WFS) as fine aggregate in the manufacturing of flowable sand concrete (FSC). For this, the sand is substituted with the WFS at dosages of 0%, 3%, 5%, 8%, and 10%. The influence of this waste on the fresh properties, such as slump flow, bulk density, and hardened properties such as compressive strength and water absorption by capillary of FSC, was studied, analysed, and compared with control flowable sand concretes. The results obtained show that the FSC made with WFS has some better mechanical characteristics and less absorption than conventional concrete. Additionally, this study ensures that recycling these wastes in FSC provides a beneficial way to save material costs and address some environmental issues, as well as obtain a new material that allows for use in the various types of structural components.

5 January 2026 in Periodica Polytechnica Chemical Engineering
Verified
Journal Article
Open access
PDF file
MHMoussa Hadjadj
Moussa Hadjadj
Mohamed GuendouzMohamed Guendouz
Mohamed Guendouz
DBDjamila Boukhelkhal
Djamila Boukhelkhal
Due to its large consumption of raw materials and high construction work rates, the building industry presents one of the most effective potentials for the use of recycled materials. In an attempt to maximize landfill waste valorization and enhance concrete properties, this study investigates the combined use of industrial ceramic waste (CW) and granite waste (GW) with seashell bio-waste (SW) and their effect on the physical and mechanical properties of flowable sand concrete (FSC). For this, seven FSC mixtures were manufactured by partially replacing natural sand with different amounts of CW, GW, and SW combinations (0, 5, 10, 15, 20, 25, and 30 wt%). The results showed that up to 30% recycled aggregates could be utilized while maintaining the fresh properties of all FSC mixes. Compressive and flexural strengths as well as ultrasonic pulse velocity were significantly improved by 40%, 90%, and 6%, respectively. Both water absorption and porosity were reduced by 20% with the simultaneous addition of 30% recycled aggregates, compared to the reference concrete. Furthermore, the scanning electron microscopy analysis of some FSC mixes showed that the microstructure of FSC was enhanced with a stronger bond between the cement paste and aggregates when the three recycled aggregates were included in amounts of up to 30%. Finally, the results are encouraging when CW and GW are used simultaneously with SW in developing high-strength FSC, allowing the replacement of up to 30% of fine aggregates for sustainable construction.

17 December 2024 in STUDIES IN ENGINEERING AND EXACT SCIENCES
Verified
Journal Article
Open access
PDF file
HMHADJADJ Moussa Moussa
HADJADJ Moussa Moussa
MGMohamed Guendouz
Mohamed Guendouz
DBDjamila Boukhelkhal
Djamila Boukhelkhal
The durability of concrete structures and human safety can be seriously affected by fire. The present investigation was conducted to determine the fire resistance of flowable sand concrete (FSC) prepared using seashell powder (SSP) cement substitute (5, 10, and 15% by weight) combined with granite waste a replacement for natural fine aggregate (10, 20, 30, and 40% by volume). For this purpose, the changes in weight, compressive strength, and microstructure properties of hardened FSCs were measured before and after exposure to different high temperatures of 200 °C, 400 °C, 600 °C, and 800 °C. The results showed that the use of up to 40% GW as a replacement for fine aggregate and 10% SSP as a cement replacement could be positively incorporated in the production of SSP-blended FSC, where failure due to fire is a problem.