1 March 2024 in Physics of Fluids
The bubble near the wall of shear flow will be subjected to both wall-induced lift and shear-induced lift. The two-lift interaction will markedly change the dynamic behavior of the bubble. In this experiment, the lateral motion of a single bubble (deq=2.33−3.42 mm, Reb=470−680) rising near the vertical wall in a linear shear flow was studied. The positive-synergy and negative-synergy between the wall- and shear-induced lift effects on bubble dynamics were compared. The experiment was carried out in a vertical water tunnel with a curved screen used to generate a stable linear shear flow. Using the shadow method and two charge-coupled device cameras, the movement parameters of the bubble were captured, including the movement trajectory of the bubble, length–diameter ratio, and instantaneous velocity. The lift coefficient CL and drag coefficient CD were obtained by quasi-steady-state analysis and calculation. By fitting the steady lift coefficient, the relation of CL with dimensionless wall distance S* and the Reynolds number Reb was obtained. The results show that there is a critical value of the initial dimensionless distance S* about [S*] = 1.6. When S* > [S*], the bubble is subjected to both wall-induced lift and shear-induced lift. The lift coefficient CL decreases with the increase in S*. When S* < [S*], the bubble receives additional induced lift from the wall. The CL of the smaller bubble was smaller and increases with the increase in S*, while the deformation of the larger bubble will interact with the wall to produce deformation lift away from the wall, presenting larger CL, and decrease with the increase in S*.
1 April 2023 in Physics of Fluids
Adding a small amount of surfactant to a gas-liquid two-phase flow can markedly change the dynamic behavior of its bubbles. In this study, the lateral motion of a single bubble (deq=1.99-3.33 mm, Reb=200-420) contaminated by surfactant and rising in a linear shear flow is experimentally studied. Sodium dodecyl sulfate (SDS) is chosen as the surfactant with concentrations ranging from 10 ppm to 50 ppm. A curved screen is used to generate a stable linear shear flow, and particle image velocimetry (PIV) is used to measure the quality of the flow field. Bubble motion parameters, including trajectory, aspect ratio, instantaneous velocity, terminal velocity, are captured using the shadow method with charge-coupled device (CCD) cameras. The lift coefficient CL is obtained by quasi-steady-state analysis. The results show that the presence of surfactant inhibits the lateral migration of bubbles rising in a shear flow and that increasing the SDS concentration and bubble equivalent diameter strengthens this inhibition effect. That is, the CL and the net lateral migration distance decreased with SDS concentration and bubble equivalent diameter. In addition, the variation trends of the quasi-steady drag coefficient, bubble terminal velocity, and bubble oscillation frequency with bubble equivalent diameter and SDS concentration also were analyzed.
1 July 2024 in Physics of Fluids
Particle image velocimetry was employed to investigate the impact of convergent–divergent riblets on turbulent boundary layers in both clear water and liquid–solid two-phase flow fields containing 155 μm polystyrene particles. The turbulence statistics such as turbulence intensity and Reynolds stress were investigated. The spatial topology of spanwise vortex head and the development and evolution process of hairpin vortices were explored from Euler and Lagrange perspectives, respectively. Additionally, the particle distribution, concentration, and dispersion within the turbulent boundary layer were statistically analyzed. The results indicated that the boundary layer thickness, friction resistance, integrated turbulence intensity, and Reynolds stress were significantly lower on divergent riblet walls compared to convergent riblet walls. Notably, divergent riblets with a yaw angle of 30° exhibited the best drag reduction effect in both single-phase and two-phase flow fields. The addition of particles resulted in an increase in boundary layer thickness but effectively reduced turbulent fluctuations in the logarithmic region, enhancing drag reduction. This extended the drag reduction range of divergent riblets to a yaw angle of 45°, increasing the maximum drag reduction rate to 26.18%. Through spatial multi-scale local average structure function and finite-time Lyapunov exponent field analysis, it was found that the 30° divergent riblet wall significantly inhibited the development of vortex structures and reduced momentum exchange within the boundary layer. Conversely, the 30° convergent riblet wall had the opposite effect, while the particle phase inhibited the development of all wall turbulent structures. Analysis of particle concentration variations within different regions of the turbulent boundary layer revealed that as the normal height of the boundary layer increased, particle concentration gradually increased, and particle dispersion decreased accordingly. The analysis further showed that particle dispersion was mainly influenced by flow structures, whereas concentration was significantly affected by turbulence intensity. These findings elucidate the effect of the flow field on the particle phase and provide insights into the interaction mechanism between the flow field and particles.
1 August 2024 in AIP Advances
In order to reveal the modulation of particles on turbulent coherent structures and particle concentration variations induced by turbulence, particle image velocimetry experiments were performed in a dilute liquid–solid two-phase turbulent boundary layer. Large-scale coherent structures, including streaks and hairpin vortices, were extracted in the liquid–solid two-phase turbulent boundary layer by using multiple methods, such as proper orthogonal decomposition and finite-time Lyapunov exponent. The results showed that the addition of particles thickened the buffer layer of the average velocity profile, weakened the streamwise turbulence intensity at y+ > 10, strengthened the wall-normal turbulence in the near wall region (y+ < 52), and weakened the Reynolds stress in the logarithmic law region. A more thorough study of the turbulent structure revealed that the particles caused the mean spacing of the near-wall streak structure to increase, hairpin vortex migration to slow down, the uplift of hairpin vortex to be suppressed, and the overall size of the hairpin vortex packet to be compressed. This demonstrated that particles could modulate turbulence by inhibiting the development of hairpin vortices.