The motion of near-wall bubble-in-chain, which is a crucial aspect of the study of near-wall bubble flows, involves not only the wall effect but also the interactions between bubbles. However, there have been few studies on this topic. In this study, we investigated the motion of near-wall bubble-in-chain using a dual-camera orthogonal shadow method and tracked bubbles using image processing and feature matching techniques. Considering both the wall effect and bubble generation frequency, we discussed the statistical characteristics, motion modes, dynamic characteristics, and energy evolution of bubbles. The results demonstrate that an increase in bubble generation frequency leads to a greater deviation of bubble trajectories from the wall and an increase in trajectory amplitude while weakening the suppression of bubble speed by the wall. Furthermore, changes in both bubble equivalent diameter and drag coefficient reveal how bubble generation frequency affects their shape stability during motion as well as regulation by the wall effect. The drag coefficient decreases with increasing Reynolds number for bubbles; however, an increase in bubble generation frequency broadens its distribution range. Additionally, it is evident that the wall effect significantly impacts drag characteristics for bubbles: uncollided bubbles experience increased drag coefficients with greater distance from the wall while collided bubbles exhibit decreased drag coefficients. In cases of high generation frequency, the conversion of kinetic energy to surface energy during bubble collisions, especially the enhancement of the peak of surface energy, indicates an increase in the bubble’s energy storage capacity and energy conversion efficiency. The findings not only enhance comprehension of behavior exhibited by near-wall bubbles but also offer a novel perspective for regulating near-wall bubble flows in industrial applications.
1 December 2024 in Journal of Applied Fluid Mechanics
The motion of bubbles near a solid vertical wall and the resulting induced flow field were experimentally investigated using the shadow method and particle image velocimetry (PIV). The study analyzed how bubble generation frequency and initial distance from the wall affect the average velocity distribution of bubbles and the characteristic parameters of the bubble-induced flow. The results demonstrate that a wall's presence can both decelerate and accelerate the movement of a bubble chain. This dual effect diminishes with increasing distance from the wall, and a higher bubble generation frequency can alleviate the slowing effect. The induced flow field near the wall generates secondary vortices, formed due to the wall's influence and the accumulation of leading-edge vortices from bubbles on the wall, especially at medium and low generation frequencies. However, at high generation frequencies, their formation is not solely attributable to these factors. Instead, it is primarily due to secondary induction within the bubble-induced flow, with the wall predominantly compressing the flow field. Additionally, proper orthogonal decomposition (POD) analysis reveals the impact of different bubble generation frequencies on induced flow characteristics. High-frequency bubbles exhibit a stronger flow-inducing capability, but in such cases, the subsequent bubble tends to disrupt the flow structure established by its predecessor, leading to a more uniform distribution of energy throughout the induced flow field.
In order to reveal the modulation of particles on turbulent coherent structures and particle concentration variations induced by turbulence, particle image velocimetry experiments were performed in a dilute liquid–solid two-phase turbulent boundary layer. Large-scale coherent structures, including streaks and hairpin vortices, were extracted in the liquid–solid two-phase turbulent boundary layer by using multiple methods, such as proper orthogonal decomposition and finite-time Lyapunov exponent. The results showed that the addition of particles thickened the buffer layer of the average velocity profile, weakened the streamwise turbulence intensity at y+ > 10, strengthened the wall-normal turbulence in the near wall region (y+ < 52), and weakened the Reynolds stress in the logarithmic law region. A more thorough study of the turbulent structure revealed that the particles caused the mean spacing of the near-wall streak structure to increase, hairpin vortex migration to slow down, the uplift of hairpin vortex to be suppressed, and the overall size of the hairpin vortex packet to be compressed. This demonstrated that particles could modulate turbulence by inhibiting the development of hairpin vortices.
Both propeller slipstream and flap jet flow can significantly increase the aircraft lift coefficient. To establish design principles for efficient lift enhancement via jet flow under the influence of slipstream, wind tunnel experiments are conducted on a wing with propeller slipstream and jet flow. Force measurements using a balance and flow field measurements using hot-wire anemometry are employed to investigate the effects of different jet flow distribution methods on lift enhancement. The results indicate that the coupling of slipstream and jet flow effects can significantly increase wing lift. The stronger the slipstream effect, the more pronounced the lift enhancement under the same momentum coefficient. At the same thrust coefficient, a higher momentum coefficient is required in the slipstream-affected region to suppress airflow separation. Under the same jet flow rate, increasing the momentum coefficient in the slipstream-affected region can significantly improve lift enhancement. At the thrust coefficient of 0.46 and the momentum coefficient of 0.1, the optimized jet flow distribution method achieved a 52.6% greater lift enhancement compared to the spanwise uniform jet flow distribution method.