24 January 2020 in Proceedings of the National Academy of Sciences
MLMichiel A. J. van Limbeek
Michiel A. J. van Limbeek
Significance: From critically affecting the performance of an aircraft to droplet-based additive manufacturing, the solidification of impacting droplets influences a wide range of industrial applications; thus, a deeper fundamental understanding of the solidification of an impacting droplet is necessary. In this work, we reveal and rationalize a peculiar freezing morphology originating from the complex interplay between the droplet-scale hydrodynamics and phase-transition effects at sufficiently high substrate undercooling. The direct visualization of different freezing morphologies only became possible as we adopt an optical technique (TIR) in the context of freezing. This technique can be employed in more complex situations, such as solidification of an impacting droplet on liquid-infused or patterned surfaces, which potentially can influence many industrial processes.
22 September 2016 in Soft Matter
The control of wetting behaviour underpins a variety of important applications from lubrication to microdroplet manipulation. Electrowetting is a powerful method to achieve external wetting control, by exploiting the potential-dependence of the liquid contact angle with respect to a solid substrate. Addition of a dielectric film to the surface of the substrate, which insulates the electrode from the liquid thereby suppressing electrolysis, has led to technological advances such as variable focal-length liquid lenses, electronic paper and the actuation of droplets in lab-on-a-chip devices. The presence of the dielectric, however, necessitates the use of large bias voltages (frequently in the 10–100 V range). Here we describe a simple, dielectric-free approach to electrowetting using the basal plane of graphite as the conducting substrate: unprecedented changes in contact angle for ultra-low voltages are seen below the electrolysis threshold (50° with 1 V for a droplet in air, and 100° with 1.5 V for a droplet immersed in hexadecane), which are shown to be reproducible, stable over 100 s of cycles and free of hysteresis. Our results dispel conventional wisdom that reversible, hysteresis-free electrowetting can only be achieved on solid substrates with the use of a dielectric. This work paves the way for the development of a new generation of efficient electrowetting devices using advanced materials such as graphene and monolayer MoS2.
6 September 2022 in Journal of Fluid Mechanics
When a freely suspended liquid film ruptures, it retracts spontaneously under the action of surface tension. If the film is surrounded by air, the retraction velocity is known to approach the constant Taylor–Culick velocity. However, when surrounded by an external viscous medium, the dissipation within that medium dictates the magnitude of the retraction velocity. In the present work, we study the retraction of a liquid (water) film in a viscous oil ambient (two-phase Taylor–Culick retractions), and that sandwiched between air and a viscous oil (three-phase Taylor–Culick retractions). In the latter case, the experimentally measured retraction velocity is observed to have a weaker dependence on the viscosity of the oil phase as compared with the configuration where the water film is surrounded completely by oil. Numerical simulations indicate that this weaker dependence arises from the localization of viscous dissipation near the three-phase contact line. The speed of retraction only depends on the viscosity of the surrounding medium and not on that of the film. From the experiments and the numerical simulations, we reveal unprecedented regimes for the scaling of the Weber number ${We}_{f}$ of the film (based on its retraction velocity) or the capillary number ${Ca}_{s}$ of the surroundings versus the Ohnesorge number ${Oh}_{s}$ of the surroundings in the regime of large viscosity of the surroundings ( ${Oh}_{s} \gg 1$ ), namely ${We}_{f} \sim {Oh}_{s}^{-2}$ and ${Ca}_{s} \sim {Oh}_{s}^{0}$ for the two-phase Taylor–Culick configuration, and ${We}_{f} \sim {Oh}_{s}^{-1}$ and ${Ca}_{s} \sim {Oh}_{s}^{1/2}$ for the three-phase Taylor–Culick configuration.
27 July 2023 in Physical Review Fluids
We combine experiments and numerical computations to examine underlying fluid mechanical processes associated with bioaerosol generation during violent respiratory maneuvers, such as coughing or sneezing. Analogous experiments performed in a cough machine—consisting of a strong shearing airflow over a thin liquid film—allow us to illustrate the changes in film topology as it disintegrates into small droplets. We identify that aerosol generation during the shearing of the liquid film is mediated by the formation of inflated baglike structures. The breakup of these bags is triggered by the appearance of retracting holes that puncture the bag surface. Consequently, the cascade from inflated bags to droplets is primarily controlled by the dynamics and stability of liquid rims bounding these retracting holes. We also reveal the key role of fluid viscosity in the overall fragmentation process. It is shown that more viscous films when sheared produce smaller droplets.
3 December 2021 in Physical Review Fluids
MLMichiel A. J. van Limbeek
Michiel A. J. van Limbeek
+2
When a droplet is brought in contact with an undercooled surface, it wets the substrate and solidifies at the same time. The interplay between the phase transition effects and the contact-line motion, leading to its arrest, remains poorly understood. Here we reveal the early solidification patterns and dynamics of spreading hexadecane droplets. Total internal reflection imaging is employed to temporally and spatially resolve the early solidification behavior. With this, we determine the conditions leading to the contact-line arrest. We quantify the overall nucleation behavior, i.e., the nucleation rate and the crystal growth speed and show its sensitivity to the applied undercooling of the substrate. We also show that for strong enough undercooling it is the rapid growth of the crystals which determines the eventual arrest of the spreading contact line. By combining the Johnson-Mehl-Avrami-Kolmogorov nucleation theory and scaling relations for the spreading, we calculate the temporal evolution of the solid area fraction, which is in good agreement with our observations.
27 October 2020 in Physical Review Letters
The impact of a droplet on an undercooled surface is a complex phenomenon as it simultaneously instigates several physical processes that cover a broad spectrum of transport phenomena and phase transition. Here, we report and explain an unexpected but highly relevant phenomenon of fingered growth of the solid phase. It emerges during the impact of a binary droplet that freezes from the outside prior to the impact on the undercooled surface. We establish that the presence of presolidified material at the advancing contact line fundamentally changes the resulting dynamics, namely, by modifying the local flow mobility that leads to an instability analogous to viscous fingering. Moreover, we delineate the interplay between the interfacial deformations of the impacting droplet and patterned growth of the solid phase as disconnected patterns emerge at faster impacts.