13 April 2020 in ACS Applied Materials & Interfaces
12 August 2024 in Applied Physics Letters
We report the properties of molecular beam epitaxy deposited AlBN thin films on a recently developed epitaxial nitride metal electrode, Nb2N. While a control AlN thin film exhibits standard capacitive behavior, distinct ferroelectric switching is observed in the AlBN films with increasing Boron mole fraction. The measured remnant polarization Pr∼15μC/cm2 and coercive field Ec∼ 1.45 MV/cm in these films are smaller than those recently reported on films deposited by sputtering, due to incomplete wake-up, limited by current leakage. Because AlBN preserves the ultrawide energy bandgap of AlN compared to other nitride hi-K dielectrics and ferroelectrics, and it can be epitaxially integrated with GaN and AlN semiconductors, its development will enable several opportunities for unique electronic, photonic, and memory devices.
7 November 2022 in Applied Physics Letters
This paper demonstrates a hafnium zirconium oxide (HZO)-based ferroelectric NEMS unimorph as the fundamental building block for very low-energy capacitive readout in-memory computing. The reported device consists of a 250×30 μm2 unimorph cantilever with 20-nm-thick ferroelectric HZO on 1 μm SiO2. Partial ferroelectric switching in HZO achieves analog programmable control of the piezoelectric coefficient (d31), which serves as the computational weight for multiply accumulate (MAC) operations. The displacement of the piezoelectric unimorph was recorded by actuating the device with different input voltages Vin. The resulting displacement was measured as a function of the ferroelectric programming/poling voltage VP. The slopes of central beam displacement (δmax) vs Vin were measured to be between 182.9 nm/V (for −8 Vp) and −90.5 nm/V (for 8 Vp), which corresponds to displacement proportionality constant β of 68 nm/V2 for +ve Vp and 47 nm/V2 for −ve Vp, demonstrating linear behavior of the multiplier unit. The resultant δmax from AC actuation is in the range of −18 to 36 nm and is a scaled product of Vin and programmed d31 (governed by the Vp). The multiplication function serves as the fundamental unit for MAC operations with the ferroelectric NEMS unimorph. The displacement from many such beams can be added by summing the capacitance changes, providing a pathway to implement a multi-input and multi-weight neuron. A scaling and fabrication analysis suggests that this device can be CMOS compatible, achieving high in-memory computational throughput.
15 April 2026 in Nano Letters