2 June 2026 in International Sustainable Energy Conference - Proceedings
Photovoltaic-Thermal (PVT) collectors offer significant potential to boost the efficiency of heat pump systems - provided that heat pumps are optimised to work with them. A recent market study explored the readiness of brine heat pumps for PVT integration, focusing on two operational modes: on the one hand, using PVT collectors as the sole heat source and on the other hand, combining PVT with geothermal systems. As part of the German initiative IntegraTE-XL, the project consortium developed clear criteria for defining "PVT-ready" heat pumps in both configurations. A comprehensive market survey followed, resulting in an overview of products that meet this new definition in various ways.
5 June 2026 in International Sustainable Energy Conference - Proceedings
Aggregated building models are defined as Urban Building Energy Models (UBEM) in which model complexity is reduced through the use of aggregated buildings characterized by building archetypes. These models are important tools for analyzing heating, cooling, and electricity demand at district- to city-level. An extended aggregated building model that refines national building archetypes on local building archetypes is proposed. Stakeholder surveys, as part of a toolbox, are used to collect input data for the characteristics of buildings and energy supply systems, as well as user behavior. The use of local building archetypes derived from this data increases the validity of the results compared to the use of national building archetypes. The methodology to generate local building archetypes based on data from stakeholder surveys is presented.
3 June 2026 in International Sustainable Energy Conference - Proceedings
This paper reports findings from a real-world laboratory that examined heat saving potential and room comfort under a range of single room control heating strategies in a fifty person office building with small shared office rooms. Overall room comfort was found to be determined by thermal comfort, by measured indoor air temperatures above 18 ◦C and by users’ perception of the weather. Visual, acoustic and respiratory factors were hardly found to influence overall room comfort. The strategies evaluated comprised no pre-heating to up to 90 minutes of pre-heating before the anticipated arrival of users. None of the strategies produced a marked reduction in reported thermal comfort, whereas heat savings of 9 to 51 % relative to a conventional heating control strategy were achieved.
26 April 2024 in International Sustainable Energy Conference - Proceedings
District heating systems are one key element of the transition towards a climate-neutral heat supply since they allow for the use of various renewable energy sources and the increase of renewable heat generation, in particular when combined with seasonal thermal energy storage. Deep geothermal heat is a renewable heat source that can be used to cover the thermal base load of such a district heating system. Also in combination with other renewable heat sources, such as solar thermal or heat pumps, a climate-neutral heat supply for districts or even complete cities can be realised. This paper deals with the analysis of different climate-neutral heat supply concepts that were elaborated for a district heating system currently in the planning phase using deep geothermal heat as the primary heat source, located in the town of Graefelfing near Munich, Germany. The authors present, discuss and assess various options regarding renewable heat sources and including (seasonal) thermal energy storage, to fully cover the thermal loads of a new district heating system in a technically, economically and environmentally favourable way. As a result of this study, a heat supply concept was selected, in which a heat pump using the return flow of the deep geothermal circuit as a heat source maximises the utilisation of the available deep geothermal heat source to cover more than 95 % of the annual heat demand by deep geothermal heat combined with a heat pump.
17 April 2026 in International Sustainable Energy Conference - Proceedings
This paper outlines the collaborative research project, entitled “innoBeLs”, the aim of which is to develop and evaluate innovative container concepts for latent heat stores in solar cold district heating networks. The project started at the beginning of 2025 and will conclude by the end of 2028. The primary focus is on the development and implementation of innovative economic and ecological container concepts forice stores. Concrete containers, which are characterized by their high cost as well as high emission and energy intensity, are by now the most widespread technology for underground ice stores with volumes between 100 m³ and 1 000 m³. These containers feature two heat exchanger coils composed of PE (polyethylene) pipes attached to aluminum profiles. In comparison, the new innovative container concepts to be developed should reduce negative environmental impacts and resource use by at least 50 percent and cut costs by at least 20 percent.