The district heating sector in Germany needs to be supplied increasingly from renewable sources. Large-scale solar thermal systems can make a significant contribution to this process. The paper analyzes 38 concepts of feasibility studies as well as 30 realized systems by investigating relevant designing parameters. Network supply temperatures of around 75 °C and 80 °C are very common for the feed-in of solar thermal energy. The achievable solar fraction is strongly dependent on the storage capacity. A doubling of solar fraction typically requires a tenfold increase in storage volume. The installed storage capacity is often smaller than 100 l/m 2 . Large seasonal storages, as usual in Denmark, are very seldom in Germany so far. Thus, stagnation events become more relevant in large-scale systems, as we report from the realized projects. Systems with solar fractions of around 20%, which are typical for district heating networks especially in countryside regions, achieve up to 50 stagnation days per year, a representative stagnation day is analyzed for one monitored system. Finally, the paper addresses possible causes of stagnation and discusses a prevention strategy by using heat pipe collectors with inherent temperature limitation.
1 November 2021 in Journal of Physics: Conference Series
Wall and roof components made of steel sandwich elements are firmly established in industrial and commercial construction. They are cost-effective and characterized by excellent physical properties. Here, hybrid approaches from heating- and cooling ceiling construction were examined for the solar thermal activation of sandwich elements. Besides the implementation of the solar components, the connection to and the optimization of the system technology was focused. In addition, alternative piping materials were investigated numerically and experimentally. The performance as well as the static and thermo-hydraulic behavior of the new active components were simulatively and experimentally examined, and the economic viability of the variants was also checked. With the newly developed solar sandwich elements, an overall energy concept was developed with connection variants to the building services system, control and storage technology. Steel sandwich elements with mineral fiber core are well suited for the hidden integration of component parts such as pipe registers and heat conducting plates. The functionality of the component has been proven, the implementation of heat exchanger leads to considerable heat gains. In combination with a brine-to-water heat pump system, the solar panel can provide for a more sustainable operation and a significant size reduction of the geothermal source.
Photovoltaic-Thermal (PVT) collectors offer significant potential to boost the efficiency of heat pump systems - provided that heat pumps are optimised to work with them. A recent market study explored the readiness of brine heat pumps for PVT integration, focusing on two operational modes: on the one hand, using PVT collectors as the sole heat source and on the other hand, combining PVT with geothermal systems. As part of the German initiative IntegraTE-XL, the project consortium developed clear criteria for defining "PVT-ready" heat pumps in both configurations. A comprehensive market survey followed, resulting in an overview of products that meet this new definition in various ways.