This study aims to conduct abnormality detection by applying machine learning algorithms when drilling a carbon fiber reinforced plastic laminate. In-process signals including current, thrust force, and vibration were captured during the dry drilling experiments using a 6 mm physical vapor deposit diamond-coated drill at the consistent spindle speed of 6500 RPM and 0.05 mm/rev. Across measurements from out-of-process variables, including hole diameter, roundness, surface roughness, entry/exit delamination, and entry/exit uncut fiber area, in-process measurements were most able to find outliers with respect to diameter. Both Principal Component Analysis, an unsupervised dimensionality reduction technique, and Linear Discriminant Analysis, a supervised dimensionality reduction technique, could separate oversize or undersize holes from average-sized holes when using fast Fourier transformation data of in-process vibration. Predictive performance with k-Nearest Neighbors shows that our machine learning pipeline can predict oversized vs. non-oversized holes with over 85% accuracy in this dataset. Peak prediction performance is obtained when in-process measurement data is viewed from the frequency domain, and predictions are weighted based on the relative distances of the nearest neighbors.
20 July 2024 in International Journal of Precision Engineering and Manufacturing
The milling of highly flexible workpieces, such as thin-walled structures used in turbine blades, aerospace equipment, and jet engine compressors, requires vibration compensation to improve the quality of the workpiece surface. Vibration can be reduced by selecting appropriate cutting parameters. However, this approach reduces system productivity. This paper presents an active workpiece holder that controls the vibration of general computer numerical control machine tools. The proposed holder, which comprises a flexible guide mechanism, driver, and sensor, measures vibration and actively controls it using piezoactuators. A high-rigidity flexure mechanism was designed for the holder, and finite element method simulation and modal analysis were performed. Finally, the proposed system was fabricated, and experimental verification indicated that the system reduced vibration. The surface quality obtained using the controlled system was ∼50% better than that obtained using the uncontrolled system.