We fabricated top-gate and self-aligned indium- gallium-zinc-oxide thin-film transistors (IGZO TFTs) at a maximum process temperature of 150 °C using a coatable organic gate insulator (OGI). By forming a damage and contaminationfree interface between the IGZO channel and OGI, and forming low-resistive source/drain regions by Al reaction method, we achieved good TFT properties, such as field effect mobility of 9.8 cm 2 /Vs, subthreshold swing of 0.21 V/decade, and hysteresis of 0.3 V, with minimizing a parasitic capacitance. Although the TFT showed an abnormal degradation behavior under positive gate bias stress testing in an ambient air, it was suppressed by forming an additional organic passivation layer.
1 March 2013 in Japanese Journal of Applied Physics
A single-walled carbon nanotube thin-film transistor (SWCNT TFT) was formed by an aligned SWCNTs channel assembled by the dielectrophoretic (DEP) process. In this work, we investigated the effects of the DEP factors (frequency, solution concentration) on structural (orientation and density in the SWCNT channels) and electrical properties of SWCNT TFTs. A uniform, well-aligned and density controlled SWCNT channel was achieved by optimizing the DEP assembly process, and as a result, electrical properties (mobility and on/off current ratio) of SWCNT TFTs were improved. In addition, we also discussed the effect of uniformity of assembled SWNTs in a channel on performance variation of the SWCNT TFTs. We found that the tube density and uniformity are key parameters which determine electrical properties and performance variation of SWCNT TFTs.