1 April 2023 in Review of Scientific Instruments
Here, we report our recent progress in the design, fluid thermodynamics simulation, and high-power test of the2nd harmonic cavity for the China Spallation Neutron Source Phase II. A high-performance and large-size magnetic alloy (MA) core was developed as the load material for the radiofrequency cavity to achieve a high gradient of 40 kV/m. The water-cooling structure and cooling efficiency were studied and improved through numerical analysis and thermal experiments. The long-term stability of the cavity, especially the waterproofness of the MA cores with high heat load, was verified by high power tests.
13 October 2023 in IEEE Transactions on Nuclear Science
Two high-power tetrode tubes operated in push-pull mode were employed as the final stage amplifier for the wideband magnetic alloy (MA) loaded cavity in the China Spallation Neutron Source Phase II (CSNS-II). However, the anode voltage of the tetrode tubes exhibits significant waveform distortion due to the wideband load impedance and dynamic tube characteristics. This distortion poses a threat to beam stability and results in additional power dissipation within the cavity. Consequently, it is imperative to address the compensation of higher harmonics. Prior to achieving this, a comprehensive and intricate analysis of tetrode tube operation is required, involving the simultaneous resolution of numerous variables to obtain accurate solutions for anode voltage and anode current. This paper introduces a new method for analyzing tetrode tube operation in the presence of multi-harmonics. The efficacy of this method is verified through high-power tests.
1 March 2022 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
1 March 2023 in Review of Scientific Instruments
The application of high-power solid state amplifiers (SSAs) in accelerator facilities is increasing, and equipment failure caused by reflected power is the main risk to their long-term operation. High-power SSAs often comprise multiple power amplifier modules. Full power reflection is more likely to damage the modules in SSAs if the amplitudes of the modules are unequal. Optimization of the power combiners is an effective means for improving the stability of SSAs under high power reflection. This study analyzes the mechanisms and conditions of reflected power generation using the scattering parameters of the combiner and proposes an optimization scheme for the combiner. The simulation and experimental results show that some modules may receive reflected power as high as nearly four times the rated power of one module when the SSA meets certain conditions, which could damage the modules. The maximum reflected power can be effectively reduced and the anti-reflection ability of SSAs can be improved by optimizing the combiner parameters to suppress the maximum reflected power.
25 February 2025 in Nuclear Science and Techniques
21 September 2023 in Nuclear Science and Techniques